@storp
Same here.
> /ip neighbor discovery-settings set discover-interface-list=!WANs
> /ip neighbor export
<..........>
/ip neighbor discovery-settings
set discover-interface-list=WANs
A scheduler can be used as a workaround, e.g.Be carefull, netwatch utility broken since 6.42.1. Up and down scripts does not execute.
/system scheduler
add disabled=yes interval=1m name=script1 on-event=\
"/system scheduler disable script1\r\
\n/system script run script1" policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \
start-date=may/23/2018 start-time=00:00:00
add disabled=yes interval=1m name=script2 on-event=\
"/system scheduler disable script2\r\
\n/system script run script2" policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \
start-date=may/23/2018 start-time=00:00:00
/system script
add name=script1 owner=admin policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=\
"/log info \"script1 runs\""
add name=script2 owner=admin policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=\
"/log info \"script2 runs\""
/tool netwatch
add down-script=\
"/log info \"down, enable script2\"\r\
\n/system scheduler enable script2" host=8.8.8.8 up-script=\
"/log info \"up, enable script1\"\r\
\n/system scheduler enable script1"
Same thing just happened to me. Updated all the MT's at home and now my outdoor AP seems to be power cycling. I shoulda left it alone. Tonight I get to climb up to the 18' roof and fix, YAY!This update has bricked one of my HAP AC units to a reboot loop I had to use netinstall to restore it (first time for me)
After netinstall and upgrade everything seems fine
Thanks!
Well first post says. Export and backup your config before upgrade In my undestanding that would include downloading dude database export to PC before upgrade.RB HEXr3 upgrade from 6.42 to 6.42.2
dude packet also active
Manual ugrade in windows dude.exe 6.42.2 , and cant log in
SAY: cant read database
edit
go back to 6.42.1 .. and again
cant read database .. well done mikrotik.. aaaaah
Apprently - it is not fixed in 6.42.2. I found logins as admin from different IPs allover the world to my CCRs1036 with 6.43rc11.Hi
I wonder if VPNFilter malware threat is addressed in this release.
See https://www.symantec.com/blogs/threat-i ... ot-malware and https://blog.talosintelligence.com/2018 ... ilter.html for more details.
Did you find actual logins, or only logs about attempted logins that were not successful?Apprently - it is not fixed in 6.42.2. I found logins as admin from different IPs allover the world to my CCRs1036 with 6.43rc11.
Moreover not only CCRs are affected as I found similar logins into my RB3011.
What is common - is that VPN server (pptp and l2tp) was enabled and accessible from internet on all affected devices.
Yes, you should always make backups and in case you are running Dude you should do regular exports and store them on another system.Well first post says. Export and backup your config before upgrade In my undestanding that would include downloading dude database export to PC before upgrade.
It would be great if we could get those wireless fixes into 6.42.3Version 6.43rc17 has been released.
*) wireless - fixed wireless interface lockup after period of inactivity;
*) wireless - increased stability on hAP ac^2 and cAP ac with legacy data rates;
*) wireless - improved client "channel-width" detection;
this answer saying I'm not along with the problem, so looks like 6.42.1 upgrade script won't do its job well, or something. Not sure is this can be more widespread or not, and surely don't know if this can happen to any new version.