Community discussions

  • 1
  • 4
  • 5
  • 6
  • 7
  • 8
 
keefe007
Member Candidate
Member Candidate
Posts: 124
Joined: Sun Jun 25, 2006 3:01 am

Re: v6.44beta [testing] is released!

Tue Dec 11, 2018 10:21 pm

Do any of the CRS328 fixes have anything to do with the SFP+ link up down issue?
 
llag
newbie
Posts: 29
Joined: Sat Aug 04, 2018 12:12 am

Re: v6.44beta [testing] is released!

Wed Dec 12, 2018 12:12 am

Do any of the CRS328 fixes have anything to do with the SFP+ link up down issue?
I had some SFP+ link flapping up to a few times a day before the upgrade to 6.43.7. Since the upgrade I have seen one link flap only. The CRS328 is connected using DAC (FS.com) to my CRS317. I upgraded both switches last Friday.

So the upgrade seems to have improved the stability, but not completely eliminated link flapping.
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.44beta [testing] is released!

Fri Dec 14, 2018 11:52 pm

[admin@MikroTik] > :global firmware [ / interface lte firmware-upgrade lte once as-value ];
[admin@Mikrotik] > :put ($firmware->"installed")                                            
MikroTik_CP_2.160.000_v010
[admin@MikroTik] > :put ($firmware->"latest")         
MikroTik_CP_2.160.000_v010

[admin@MikroTik] > :if (($firmware->"installed") != ($firmware->"latest")) do={ :put "Versions differ!"; }
Versions differ!
[admin@MikroTik] >
Can we please get rid of the extra line break in latest version?
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 12:31 pm

Version 6.44beta50 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 6.44beta50 (2018-Dec-17 13:01):

Important note!!! Backup before upgrade!
Due to major IPsec configuration changes in RouterOS v6.44beta39+ (see changelog below), it is advised to make a backup before upgrading. Regular downgrade will still be possible as long as no changes in IPsec peer menu are done.

MAJOR CHANGES IN v6.44:
----------------------
!) cloud - added command "/system backup cloud" for backup storing on cloud (CLI only);
!) radius - initial implementation of RadSec (Radius communication over TLS);
!) upgrade - release channels renamed - "bugfix" to "long-term", "current" to "stable" and "release candidate" to "testing";
!) upgrade - "testing" release channel now can contain "beta" together with "release-candidate" versions;
!) speedtest - added "/tool speed-test" for ping latency, jitter, loss and TCP and UDP download, upload speed measurements (CLI only);
!) ipsec - added new "identity" menu with common peer distinguishers;
!) ipsec - removed "main-l2tp" exchange-mode, it is the same as "main" exchange-mode;
!) ipsec - removed "users" menu, XAuth user configuration is now handled by "identity" menu;
----------------------

Changes in this release:

!) ipsec - added new "identity" menu with common peer distinguishers;
!) speedtest - added "/tool speed-test" for ping latency, jitter, loss and TCP and UDP download, upload speed measurements (CLI only);
!) telnet - do not allow to set "tracefile" parameter;
*) bgp - properly update keepalive time after peer restart;
*) bridge - fixed BOOTP packet forwarding when DHCP Snooping is enabled;
*) bridge - fixed IPv6 link-local address generation when auto-mac=yes;
*) capsman - always accept connections from loopback address;
*) certificate - added support for multiple "Subject Alt. Names";
*) cloud - added "ddns-update-interval" parameter;
*) conntrack - added new "loose-tcp-tracking" parameter (equivalent to "nf_conntrack_tcp_loose" in netfilter);
*) console - properly remove system note after configuration reset;
*) crs3xx - improved fan control stability;
*) crs3xx - improved stability when adding ACL rules on CRS326 and CRS328 devices (introduced in 6.44beta39);
*) defconf - fixed default configuration loading on RB4011iGS+5HacQ2HnD-IN;
*) defconf - fixed IPv6 link-local address range in firewall rules;
*) dhcp - added "allow-dual-stack-queue" setting for IPv4/IPv6 DHCP servers to control dynamic lease/binding behaviour;
*) dhcpv4-server - added "parent-queue" parameter (CLI only);
*) dhcpv6-server - properly handle DHCP requests that include prefix hint;
*) discovery - detect proper slave interface on bounded interfaces;
*) discovery - fixed malformed neighbor information for routers that has incomplete IPv6 configuration;
*) discovery - send master port in "interface-name" parameter;
*) discovery - show neighbors on actual bridge port instead of bridge itself for LLDP;
*) ethernet - fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices;
*) export - fixed "silent-boot" compact export;
*) fetch - added "http-header-field" parameter;
*) gps - added "coordinate-format" parameter (CLI only);
*) ike2 - allow to match responder peer by "my-id=fqdn" field;
*) ipsec - improved invalid policy handling when a valid policy is uninstalled;
*) kidcontrol - added IPv6 support;
*) kidcontrol - added statistics web interface for kids (http://router.lan/kid-control);
*) led - fixed default LED configuration for RBMetalG-52SHPacn;
*) lte - added "ecno" field for "info" command;
*) lte - disallow setting LTE interface as passthrough target;
*) lte - fixed passthrough functionality when interface is removed;
*) lte - improved SimCom 7100e support;
*) lte - increased reported "rsrq" precision;
*) lte - reset USB when non-default slot is used;
*) package - use bundled package by default if standalone packages are installed as well;
*) ppp - added "at-chat" command;
*) resource - fixed "total-memory" reporting on ARM devices;
*) snmp - added "tx-ccq" ("mtxrWlStatTxCCQ") and "rx-ccq" ("mtxrWlStatRxCCQ") values;
*) snmp - changed fan speed value type to Gauge32;
*) snmp - removed "rx-sector" ("Wl60gRxSector") value;
*) ssh - fixed public key format compatibility with RFC4716;
*) switch - fixed MAC learning when disabling interfaces on devices with Atheros8327 and QCA8337 switch chips;
*) system - fixed situation when all configuration was not properly loaded on bootup;
*) timezone - fixed "Europe/Dublin" time zone;
*) traceroute - improved stability when sending large ping amounts;
*) upgrade - automatically uninstall standalone package if already installed in bundle;
*) user - require "write" permissions for LTE firmware update;
*) watchdog - allow specifying DNS name for "send-smtp-server" parameter;
*) webfig - do not show bogus VHT field in wireless interface advanced mode;
*) winbox - added "allow-roaming" parameter in "Interface/LTE" menu;
*) winbox - added "challenge-password" field when signing certificate with SCEP;
*) winbox - added "conflict-detection" parameter in "IP/DHCP server" menu;
*) winbox - added src/dst address and in/out interface list columns to default firewall menu view;
*) winbox - added support for dynamic devices in "IP/Kid Control/Devices" tab;
*) winbox - allow to change VHT rates when 5ghz-n/ac band is used;
*) winbox - fixed missing w60g interface status values;
*) winbox - renamed "Radius" to "RADIUS";
*) winbox - show "R" flag under "IPv6/DHCP Server/Bindings" tab;
*) winbox - show "Switch" menu on RB4011iGS+5HacQ2HnD;
*) wireless - improvements in wireless frequency selection;
*) wireless - improved system stability for all ARM devices with wireless;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 1:12 pm

Updated wAP LTE to version 6.44beta50 and lost the wireless package. :-/
The LTE connection was really weak, though - no idea if that caused the issue.
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 1:40 pm

Updated wAP LTE to version 6.44beta50 and lost the wireless package. :-/
The LTE connection was really weak, though - no idea if that caused the issue.
After restoring my settings I can not set the country for my interface:
[admin@MikroTik] /interface wireless> set country=germany wlan1
failure: only regulatory-domain mode allowed for this country
What's the deal with this failure?
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5913
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 1:44 pm

set frequency-mode to regulatory-domain
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8292
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 2:01 pm

!) telnet - do not allow to set "tracefile" parameter;
What is this about?.. Why is this marked as important?
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 2:06 pm

set frequency-mode to regulatory-domain
That works, thanks! Can this be the cause for my trouble with wireless package?
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1717
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 2:19 pm

set frequency-mode to regulatory-domain
That works, thanks! Can this be the cause for my trouble with wireless package?
*) package - use bundled package by default if standalone packages are installed as well;
what set of packages did you have? and what did you use to upgrade?
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 2:23 pm

set frequency-mode to regulatory-domain
That works, thanks! Can this be the cause for my trouble with wireless package?
*) package - use bundled package by default if standalone packages are installed as well;
what set of packages did you have? and what did you use to upgrade?
Ah, right, that could cause the culprit. But I have standalone packages, no bundle.

Upgraded from 6.44beta40 with:
/ system package upgrade install
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
marianob85
just joined
Posts: 15
Joined: Wed Feb 08, 2017 9:47 pm

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 7:25 pm

Version 6.44b50
RouterBOARD wAP R-2nD

Problem: LTE interface does not work
Logs says: LTE1 SMS storage set failed.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 10:02 pm

If you have set EU country under wireless configuration, but you did not use regulatory-domain, then configuration will be changed to fit these requirements. Otherwise you violate the law. So if you are legal, then everything will work just fine after an upgrade ;)

What do you mean with lost package? Did you actually lose wireless package under System/Packages menu or wireless interface did not work properly?
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 10:31 pm

What do you mean with lost package? Did you actually lose wireless package under System/Packages menu or wireless interface did not work properly?
The wireless package did no longer show under System/Package, had to copy the npk file manually to recover. Tried to reproduce with a mAP lite that has very similar configuration, but its update succeeds (and regulatory-domain was updated correctly).
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
anuser
Member
Member
Posts: 372
Joined: Sat Nov 29, 2014 7:27 pm

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 10:40 pm

Version 6.44beta50 has been released.
*) wireless - improved system stability for all ARM devices with wireless;
I wouldn´t call the RB4011 unstable, but I simply cannot connect to it with Intel AC-8260 on 5.0Ghz. There´s no problem wuth cAP AC, though. Both are running the same config pushed by CAPSMAN controller. May I ask what kind of wireless instability is fixed with ARM based devices?
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2279
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.44beta [testing] is released!

Tue Dec 18, 2018 10:51 pm

If you have set EU country under wireless configuration, but you did not use regulatory-domain, then configuration will be changed to fit these requirements. Otherwise you violate the law. So if you are legal, then everything will work just fine after an upgrade ;)
It is not good. Have you been thinking about the fact that not everyone reads changelogs before upgrade?
If a simple upgrade changes the configuration and the user is not informed about it, that's not good.
Example: I set the frequency 5640 - in log say - radar detected on 5640. The AP is automatically tuned to the 5240 frequency.
This frequency is not legal in our country. And this problem is due to simple upgrade RouterOS :( :(
LAN, FTTx, Wireless. ISP operator
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 6:26 am

honzam - It simply is not possible to do anything from our side if network administrator can not read changelog before an upgrade. This is 100% responsibility of network admin. We do not change configuration usually on upgrade, however, since this change is required due to a law, we have made an exception. Can you please send supout file from your router to support@mikrotik.com? Generate file while your router is using illegal frequency while you have selected country and regulatory domain settings on your routers wireless configuration.
anuser - Please provide supout file from your router to support@mikrotik.com. We will try to reproduce this problem in our lab.
 
mducharme
Trainer
Trainer
Posts: 792
Joined: Tue Jul 19, 2016 6:45 pm

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 6:57 am

I tried to upgrade to the latest 6.44 beta (6.44beta50) but it was not successful - I end up with 100% CPU usage continuously caused by ipsec process. In winbox I cannot go into IP->IPSEC and view settings, or /ip ipsec export. If I try to export ipsec I get no output.
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 7:27 am

mducharme, please generate a supout.rif file when the issue is present and send it to support@mikrotik.com
 
mducharme
Trainer
Trainer
Posts: 792
Joined: Tue Jul 19, 2016 6:45 pm

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 8:21 am

mducharme, please generate a supout.rif file when the issue is present and send it to support@mikrotik.com
emils - Unfortunately, not possible. When it is happening, I ask my router to generate supout and it sits there not responding. I tried stopping and restarting and I get "Couldn't start - busy (12)". I'll keep trying though.
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 8:22 am

Most likely a supout.rif file is already generating in the backgound. Is there an autosupout.rif file in the Files menu?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24077
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 9:18 am

Honzam
This frequency is not legal in our country. And this problem is due to simple upgrade RouterOS :(:(
We use official sources for frequencies allowed in each country. Are you sure you are correct on this one? We use information from Qualcomm chip and European Union.
No answer to your question? How to write posts
 
tetecko
Frequent Visitor
Frequent Visitor
Posts: 70
Joined: Sun Jun 11, 2006 7:44 pm

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 11:00 am

Why this is forced? According to EU law ... it is not a obligatory for equipment provider, it is obligatory for company who runs it. So please let us chose, what we want to set up on your hardware/software and do not put this restrictions. Can you please explain why you put this restrictions on?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24077
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 11:04 am

That is not correct. If you have questions about EU laws and regulations, I can suggest to email our certification or legal department.
You are still free to select a country that does not have such laws, but I don't recommend it, it might get you into trouble.
No answer to your question? How to write posts
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24077
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 11:06 am

!) telnet - do not allow to set "tracefile" parameter;
What is this about?.. Why is this marked as important?
There was some obscure proof of concept that allowed to do strange things, but it only affected you if you gave a user account to the attacker.
No answer to your question? How to write posts
 
mistry7
Forum Guru
Forum Guru
Posts: 1245
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 11:13 am

Honzam
This frequency is not legal in our country. And this problem is due to simple upgrade RouterOS :(:(
We use official sources for frequencies allowed in each country. Are you sure you are correct on this one? We use information from Qualcomm chip and European Union.
Then we need Option to set Indoor or Outdoor use!
5180-5320 in Germany is only allowed for Indoor use!
 
tetecko
Frequent Visitor
Frequent Visitor
Posts: 70
Joined: Sun Jun 11, 2006 7:44 pm

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 11:23 am

Which ETSI you are comply with? Because as I know there is a band between 5470MHz to 5725Mhz, this leting me select this variety of frequencies, but if YOU apply on your restrictions, I cannot use 5480MHz, why?
 
mistry7
Forum Guru
Forum Guru
Posts: 1245
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 12:32 pm

Which ETSI you are comply with? Because as I know there is a band between 5470MHz to 5725Mhz, this leting me select this variety of frequencies, but if YOU apply on your restrictions, I cannot use 5480MHz, why?
+1
 
muetzekoeln
Member Candidate
Member Candidate
Posts: 106
Joined: Fri Jun 29, 2018 2:34 pm

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 12:47 pm

cannot use 5480MHz, why?

This would be channel 96. You can ask the same for channel 32 (5160MHz). At least with 20MHz bandwidth and OFDM it should be allowed to use. But this two channels are not selectable with any equipment I know. And the only webpage I found which lists them as allowed for Europe is here:
https://en.wikipedia.org/wiki/List_of_WLAN_channels

There is something about energy leaking into frequencies lower than 5150 resp. 5470MHz, I guess.
Last edited by muetzekoeln on Wed Dec 19, 2018 3:42 pm, edited 1 time in total.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24077
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 12:56 pm

Then we need Option to set Indoor or Outdoor use!
5180-5320 in Germany is only allowed for Indoor use!
.
I set the frequency 5640 - in log say - radar detected on 5640. The AP is automatically tuned to the 5240 frequency.
This frequency is not legal in our country (Czech)
You must manually used allowed frequency, but you are right, next beta will have "auto" frequency follow the country "indoor/outdoor" rules, you will have a new setting for that.
No answer to your question? How to write posts
 
mducharme
Trainer
Trainer
Posts: 792
Joined: Tue Jul 19, 2016 6:45 pm

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 1:47 pm

Most likely a supout.rif file is already generating in the backgound. Is there an autosupout.rif file in the Files menu?
No, there are no files at all in the files menu. I had rebooted and tried again. It is still trying to generate the supout 5 hours later.

If I go to the command line and type "/ip ipsec export" it also hangs forever.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2279
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 2:10 pm

Honzam
This frequency is not legal in our country. And this problem is due to simple upgrade RouterOS :(:(
We use official sources for frequencies allowed in each country. Are you sure you are correct on this one? We use information from Qualcomm chip and European Union.
Does not respect outdoor / indoor settings for EU countries.
In Czech Republic is outdoor 5500-5700. Indoor is 5180-5320.
After upgrade (6.44beta50) is AP running (with auto enabled DFS) on channel 5280 which is indoor !!! But selected channel is 5620. Thanks
LAN, FTTx, Wireless. ISP operator
 
mistry7
Forum Guru
Forum Guru
Posts: 1245
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 2:32 pm

Honzam
This frequency is not legal in our country. And this problem is due to simple upgrade RouterOS :(:(
We use official sources for frequencies allowed in each country. Are you sure you are correct on this one? We use information from Qualcomm chip and European Union.
Does not respect outdoor / indoor settings for EU countries.
In Czech Republic is outdoor 5500-5700. Indoor is 5180-5320.
After upgrade (6.44beta50) is AP running (with auto enabled DFS) on channel 5280 which is indoor !!! But selected channel is 5620. Thanks
Did you try Scanlist 5470-5720 ???
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2279
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 8:47 pm

Did you try Scanlist 5470-5720 ???
I know the scan list will solve it. But would you think that this line:

*) wireless - fixed compliance with EU regulatory domain rules;

means you need to create a scan list before upgrading RouterOS to 6.44? I find it unclear and it cause a number of problems....
The fact that the EU forces Mikrotik to comply with the law is clear to me
LAN, FTTx, Wireless. ISP operator
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 9:08 pm

What do you mean by that? With scan list you will only reduce number of frequencies. After an upgrade your list will use all frequencies that are available in your country. From previous version point of view, nothing has been changed related to scan list or indoor/outdoor solutions. Indoor/outdoor selection should be introduced in upcoming beta versions.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5578
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 9:53 pm

For outdoor I normally select the country "etsi 5.5-5.7 outdoor" that has those frequencies in the scanlist.
 
User avatar
osc86
newbie
Posts: 46
Joined: Wed Aug 09, 2017 1:15 pm

Re: v6.44beta [testing] is released!

Wed Dec 19, 2018 10:47 pm

Most likely a supout.rif file is already generating in the backgound. Is there an autosupout.rif file in the Files menu?
No, there are no files at all in the files menu. I had rebooted and tried again. It is still trying to generate the supout 5 hours later.

If I go to the command line and type "/ip ipsec export" it also hangs forever.
I experienced the same on my ccr, only chance was to downgrade to latest stable firmware.
Some settings were missing or changed after the downgrade, but I got it all working again.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24077
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.44beta [testing] is released!

Thu Dec 20, 2018 7:33 am

means you need to create a scan list before upgrading RouterOS to 6.44? I find it unclear and it cause a number of problems....
The fact that the EU forces Mikrotik to comply with the law is clear to me
First of all, this is a BETA release which should not be used anywhere near production.
Yes, the new change will enable radar-detect which could move your frequency to something you did not use before.
As a temporary workaround, you can use other country (ETSI, like suggested above) or use custom scan list.
We have made a new setting for one of the next BETA releases, that will honour the "indoor/outdoor" parameter in the country-info list, and will not move you to an indoor-only frequency, so you will not have to make any custom scan lists.
No answer to your question? How to write posts
 
pe1chl
Forum Guru
Forum Guru
Posts: 5578
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.44beta [testing] is released!

Thu Dec 20, 2018 10:54 am

Are you also working on the DFS function and possibly more logging of what is going on when DFS decides to change the frequency?
We would like to use DFS but now we can't because of the false detections... and no information about what is detected.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2279
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.44beta [testing] is released!

Thu Dec 20, 2018 1:52 pm

What do you mean by that? With scan list you will only reduce number of frequencies. After an upgrade your list will use all frequencies that are available in your country. From previous version point of view, nothing has been changed related to scan list or indoor/outdoor solutions. Indoor/outdoor selection should be introduced in upcoming beta versions.
The main point is that there is going to be a move from the outdoors to the indoors. Outdoor frequencies 5500-5700 are tuned anywhere from 5180 to 5700. So quietly indoors which is not legally correct. Is it written clearly?
LAN, FTTx, Wireless. ISP operator
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2279
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.44beta [testing] is released!

Thu Dec 20, 2018 1:57 pm


First of all, this is a BETA release which should not be used anywhere near production.
Yes, I known. I tested it on non production part of network.
We have made a new setting for one of the next BETA releases, that will honour the "indoor/outdoor" parameter in the country-info list, and will not move you to an indoor-only frequency, so you will not have to make any custom scan lists.
Yes, that's exactly what I was suggesting. Divide it into indoor / outdoor

Anyway, I have to say that I would be more pleased if you solve ARM problems that you NOT comment in another topic.
LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24077
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.44beta [testing] is released!

Thu Dec 20, 2018 2:03 pm

Not entirely correct. Our devices are certified to use those TX powers in Indoor frequencies too.
You are in the clear anyway
No answer to your question? How to write posts
 
tetecko
Frequent Visitor
Frequent Visitor
Posts: 70
Joined: Sun Jun 11, 2006 7:44 pm

Re: v6.44beta [testing] is released!

Thu Dec 20, 2018 9:40 pm

Honzam
This frequency is not legal in our country. And this problem is due to simple upgrade RouterOS :(:(
We use official sources for frequencies allowed in each country. Are you sure you are correct on this one? We use information from Qualcomm chip and European Union.
Does not respect outdoor / indoor settings for EU countries.
In Czech Republic is outdoor 5500-5700. Indoor is 5180-5320.
After upgrade (6.44beta50) is AP running (with auto enabled DFS) on channel 5280 which is indoor !!! But selected channel is 5620. Thanks
THIS IS NOT CORRECT! try to read this link and you will have a CLEAR knowledge which is allowed in Czech Republic and which is not ... https://www.ctu.cz/cs/download/oop/rok_ ... 010-12.pdf
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2279
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.44beta [testing] is released!

Thu Dec 20, 2018 10:45 pm

THIS IS NOT CORRECT! try to read this link and you will have a CLEAR knowledge which is allowed in Czech Republic and which is not .
I know this document. What exactly is wrong?
LAN, FTTx, Wireless. ISP operator
 
tetecko
Frequent Visitor
Frequent Visitor
Posts: 70
Joined: Sun Jun 11, 2006 7:44 pm

Re: v6.44beta [testing] is released!

Thu Dec 20, 2018 11:59 pm

I know this document. What exactly is wrong?
outdoor is exactly 5470MHz-5725MHz not 5500MHz-5700MHz mentioned by you in older posts .. indoor exactly 5150MHz-5350MHz not 5180MHz-5320MHz mentioned by you.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2279
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.44beta [testing] is released!

Fri Dec 21, 2018 12:48 am

I know this document. What exactly is wrong?
outdoor is exactly 5470MHz-5725MHz not 5500MHz-5700MHz mentioned by you in older posts .. indoor exactly 5150MHz-5350MHz not 5180MHz-5320MHz mentioned by you.
Yes it is 5470-5725Mhz , but it is commonly referred to as I wrote. (fully channels)
LAN, FTTx, Wireless. ISP operator
 
tetecko
Frequent Visitor
Frequent Visitor
Posts: 70
Joined: Sun Jun 11, 2006 7:44 pm

Re: v6.44beta [testing] is released!

Fri Dec 21, 2018 8:14 am

Yes it is 5470-5725Mhz , but it is commonly referred to as I wrote. (fully channels)
If Mikrotik wants to restrict use of superchannels, they have to follow ETSI/CZ rules at least. They don't. They push us to not using "czech_republic" settings, if we wants to be comply with our laws rules.
 
muetzekoeln
Member Candidate
Member Candidate
Posts: 106
Joined: Fri Jun 29, 2018 2:34 pm

Re: v6.44beta [testing] is released!

Fri Dec 21, 2018 10:34 am

They push us to not using "czech_republic" settings, if we wants to be comply with our laws rules.

That's not true. Please read this thread carefully. The next Beta release will have indoor/outdoor option, so I guess the next stable release for your production environment will have it too.
Unfortunately the change to regulatory conformance was badly communicated by Mikrotik in the release notes.

What will be more of a concern is the future of Omnitik 5 devices in Europe. The regulators are about to shut them down soon. Let's hope Mikrotik really can prevent this from happening.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24077
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.44beta [testing] is released!

Fri Dec 21, 2018 10:47 am

You guys are mixing up edge frequencies and center frequencies. Both ranges are correct.
MikroTik has many devices that are certified both for indoor and outdoor ranges, they can be used in those frequencies.
To avoid the possbility that DFS throws you into indoor/outdoor range, we have made another new setting in all next releases, where you can specify indoor or outdoor, or default = any.

None of these changes will break anything if you are already trying to follow country regulations, your links will remain the same.
If you have specific license to use other settings than defined by your country, you still have those options within other modes.
No answer to your question? How to write posts
 
mkx
Forum Guru
Forum Guru
Posts: 2612
Joined: Thu Mar 03, 2016 10:23 pm

Re: v6.44beta [testing] is released!

Fri Dec 21, 2018 1:18 pm

... and second, according to CZ rules I can set 5480MHz ...
Which channel width do you use when trying to set centre frequency to 5480MHz?
BR,
Metod
  • 1
  • 4
  • 5
  • 6
  • 7
  • 8

Who is online

Users browsing this forum: No registered users and 2 guests