Community discussions

 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

v6.43.11 [stable] is released!

Tue Feb 05, 2019 11:18 am

RouterOS version 6.43.11 has been released in public "stable" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 6.43.11 (2019-Feb-04 12:24):

Changes in this release:

*) ipsec - accept only valid path for "export-pub-key" parameter in "key" menu;
*) quickset - fixed "country" parameter not properly setting regulatory domain configuration;
*) smb - fixed possible buffer overflow;
*) w60g - fixed disconnection issues in PtMP setups;
*) wireless - improved antenna gain setting for devices with built in antennas;
*) wireless - show indoor/outdoor frequency limitations under "/interface wireless info country-info" command;

What's new in 6.43.10 (2019-Jan-24 07:09):

(factory only release)

What's new in 6.43.9 (2019-Jan-10 07:11):

(factory only release)

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device

Please keep this forum topic strictly related to this concrete RouterOS release.
 
brainy
Member Candidate
Member Candidate
Posts: 149
Joined: Fri Sep 29, 2006 3:08 pm
Location: Unterschleissheim, Germany
Contact:

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 11:43 am

Is the 5 GHz issue with RB4011 fixed ?
 
TimurA
Member Candidate
Member Candidate
Posts: 149
Joined: Sat Dec 15, 2018 6:13 am
Location: Tashkent
Contact:

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 1:03 pm

Is the 5 GHz issue with RB4011 fixed ?
I have been testing for an hour, it works, it does not fall.
Image
 
User avatar
skylark
MikroTik Support
MikroTik Support
Posts: 104
Joined: Wed Feb 10, 2016 3:55 pm

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 1:18 pm

Is the 5 GHz issue with RB4011 fixed ?
Please provide us step by step example how to repeat your mentioned issue with attached supout.rif file to support@mikrotik.com.
 
User avatar
nichky
Long time Member
Long time Member
Posts: 516
Joined: Tue Jun 23, 2015 2:35 pm

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 1:54 pm

*) ipsec - accept only valid path for "export-pub-key" parameter in "key" menu;

Can we have more info about that.

Thanks
Nikola Shuminoski
Network Engineer
E-Mail: nikola.suminoski@outlook.com
MikroTik Consultan
MTCRE l MTCWE

!) Safe Mode is your friend;
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 2:06 pm

What kind of more information you require? It simply validates the file-name value when exporting a public key from IPsec Keys menu.
 
User avatar
ErfanDL
Member Candidate
Member Candidate
Posts: 269
Joined: Thu Sep 29, 2016 9:13 am
Location: IRAN
Contact:

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 3:06 pm

release the 6.44 as stable. don't releasing spam updates !!!
 
uldis
MikroTik Support
MikroTik Support
Posts: 3424
Joined: Mon May 31, 2004 2:55 pm

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 3:19 pm

Is the 5 GHz issue with RB4011 fixed ?
Newer generation iPhone/iPad issue will be fixed in RouterOS v6.44
 
mlenhart
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Mon Oct 30, 2017 11:30 pm

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 4:18 pm

WW Dish before upgrade: RSSI -49 on both ends, after upgrade -56 on one side, -59 on 2nd side
After a reboot one side was fixed at -49 RSSI again, but 2nd shows MCS 1 and signal level 20, RSSI -59 again.
After another reboot, it is back on -49 on both ends with MCS 8 and signal level 95.

Another issue iswith making supout.rif - after waiting for more than 10 minutes, it was stucked at 1%. When stopped and tried to run again, I just got an error message: Couldn't start - busy.
 
TimurA
Member Candidate
Member Candidate
Posts: 149
Joined: Sat Dec 15, 2018 6:13 am
Location: Tashkent
Contact:

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 4:19 pm

Is the 5 GHz issue with RB4011 fixed ?
Yes, the same problems, 5ghz fell - turned off.
Image
 
nightcom
newbie
Posts: 37
Joined: Wed Aug 30, 2017 12:47 am
Location: NL

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 4:32 pm

RB3011-RM updated with no problems
RB3011UiAS-RM / RB2011UiAS-in / RB750Gr3 + Dude / CRS326-24G-2S+RM
 
pe1chl
Forum Guru
Forum Guru
Posts: 5575
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 5:39 pm

*) ipsec - accept only valid path for "export-pub-key" parameter in "key" menu;

Can we have more info about that.
They are fixing the places where commands can write to arbitrary files and thus can destroy internal configuration or open the built-in shell.
Another example was the telnet session log that was recently fixed.
Those bugs can be used by malware to cause more trouble and/or prevent removal of the malware, although they do not pose a security problem themselves.
 
anav
Forum Guru
Forum Guru
Posts: 2904
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 6:49 pm

release the 6.44 as stable. don't releasing spam updates !!!
One mans spam, is another mans meat.
To put things in perspective, in Newfoundland, the poor folk had to eat sandwiches everyday of lobster meat.
How awful. :-)

If an interim release is deemed required by MT, then so be it.
I am just super happy they ignore ignorant comments.
I just marked your post as spam!

As for the topic at hand. I recently manually inserted a 2DB antenna gain after watching a recent MUM presentation in the UK (on my capacs).
Will the update automatically insert that gain??
I'd rather manage rats than software. Follow my advice at your own risk! (Sob & mkx forced me to write that!)
 
RiniA
just joined
Posts: 7
Joined: Sun Aug 26, 2018 12:37 am

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 9:04 pm

Is the 5 GHz issue with RB4011 fixed ?
Newer generation iPhone/iPad issue will be fixed in RouterOS v6.44
viewtopic.php?f=7&t=139608&start=100#p710222
Says It should be released in the next public beta version.

Already wating long time now
 
negavoid
just joined
Posts: 8
Joined: Tue Feb 05, 2019 9:38 pm
Location: Saint-Petersburg, RU

Re: v6.43.11 [stable] is released!

Tue Feb 05, 2019 9:47 pm

Aren't you still planning to integrate udpxy from openwrt into RouterOS? It depends only from libc, and compiles under any architecture easily, and a lot of users pleasing you to add, and when you claims "router should do routing and not being overloaded by 3rd party crap" - that's it, just route for my TV's udp multicast to http tcp stream, this action won't eat CPU so much. You are don't giving a chance to do anything, proprietary OS, no toolchains to compile, no ways to create packages, just metarouter - that is not useful on hAP.
 
mszru
just joined
Posts: 15
Joined: Wed Aug 10, 2016 10:42 am

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 1:30 am

After upgrading hEX and hAP ac from 6.43.8 to 6.43.11 (ROS and FW) samba got broken.
I got the following message in Windows 10:
\\router.lan\backup is not accessible. You might not have permission to use this network resource...
The parameter is incorrect.
I restored access to samba shares by downgrading hEX back to 6.43.8 and hAP ac to 6.43.10 (factory only release).
 
i4ko
just joined
Posts: 14
Joined: Sat Sep 26, 2015 9:23 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 7:18 am

Memory leak in proxy on HEX r3 still present. Behavior is the same as described in the 6.43.8 thread

With proxy disabled the memory usage is around 42mb. If you enable the proxy but don't send any traffic the memory consumption stays at 42mb. As soon as you open the web proxy interface in winbox the memory consumption jumps to 64mb (still no traffic via proxy). As soon as any traffic flows via the proxy the memory consumption jumps to 102mb. At the same time, if you go and look at the proxy it says Total RAM Used: 996KiB. So something somewhere is leaking close to 60mb. This did not happen before on 6.42.7 or older versions.
 
eddieb
Member Candidate
Member Candidate
Posts: 131
Joined: Thu Aug 28, 2014 10:53 am
Location: Netherlands

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 8:57 am

Upgraded from 6.43.8 -> 6.43.11
using dude to push the packages on

CCR1009-8G-1S (2x ipsec/l2tp site-to-site, dhcpd)
CRS125-24G-1S
RB1100
RB962UiGS-5HacT2HnT (10pc)
RB951
RB750GL
RB2011UAS-RM
CHR running dude (CHR running in VirtualBox on OSX)

without any issues
Running 6.45.3 (stable) on :
CCR1009-8G-1S (2x ipsec/l2tp site-to-site, ipsec/l2tp roadwarrior, dhcpd, dns), CRS125-24G-1S, RB1100, RB962UiGS-5HacT2HnT (10pc), RB931-2nD, RB951, RB750GL ,RB2011UAS-RM, CHR running dude (CHR running in VirtualBox on OSX)
 
GuntOn
just joined
Posts: 5
Joined: Mon Apr 23, 2018 7:11 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 10:22 am

*) wireless - improved antenna gain setting for devices with built in antennas;
What it exactly means?
 
pavlan
just joined
Posts: 9
Joined: Sat Dec 11, 2010 11:31 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 10:27 am

I guess it works now. :)
May be they have some predefined defaults for such devices ?
So users report lower signal after upgrade...
*) wireless - improved antenna gain setting for devices with built in antennas;
What it exactly means?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24077
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 10:34 am

Those are indoor devices with 1-2dBi gain antennas. There should be not much actual difference in coverage.
No answer to your question? How to write posts
 
Egert143
just joined
Posts: 12
Joined: Tue Apr 24, 2018 4:05 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 11:08 am

Hello


*) snmp - added "tx-ccq" ("mtxrWlStatTxCCQ") and "rx-ccq" ("mtxrWlStatRxCCQ") values;

Still not working, any eta on the fix ?

Egert
 
h17
just joined
Posts: 17
Joined: Wed Apr 16, 2014 10:01 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 11:21 am

LHG-5HPnD after upgrade (6.43.8 to 6.43.11) antenna gain has been set to 25dB (minimal value I can set), Rx dropped from -60dBm to -85dBm.
I don't get it why you subtract antenna gain from received signal level, but ok... I wouldn't care the numbers if link worked fine, but IT IS NOT.
Stable link became totally unstable. Disconnects about every 30 seconds. Rolled back to 6.43.8.
 
OndrejHolas
just joined
Posts: 16
Joined: Mon Jul 30, 2018 5:54 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 1:19 pm

LHG-5HPnD after upgrade (6.43.8 to 6.43.11) antenna gain has been set to 25dB (minimal value I can set), Rx dropped from -60dBm to -85dBm.

If the other side was not upgraded also, Rx signal strength shown here seems to be corrected by antenna gain, but this is just number. The problem causing link drops is that Tx power is reduced by antenna gain configured.

6.43.11 sets new minimum for antenna gain based on model. This hardcoded minimum can be retrieved:

[admin@wapac] > /interface wireless info hw-info wlan1
ranges: 2312-2732/5/b,g,gn20,gn40
2484-2484/5/b,g,gn20,gn40
tx-chains: 0,1
rx-chains: 0,1
extra-info: pciinfo:0x0, cid:0, gain:2


You can still increase absolute transmit power by setting country to no_country_set and frequency-mode to superchannel, but unless the antenna is operating in shielded environment, the device probably violates local regulations, as it does with previous version and antenna gain set to 0 dB as well.

Ondrej
Last edited by OndrejHolas on Wed Feb 06, 2019 2:01 pm, edited 1 time in total.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24077
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 1:20 pm

I don't get it why you subtract antenna gain from received signal level
Both sides of your link have antennas, the gain is subtracted from the TX power (as it should be, according to regulations). The signal dropped by the amount because the TX power on the other end was reduced (also).
No answer to your question? How to write posts
 
pribeiro
just joined
Posts: 3
Joined: Mon Jul 24, 2017 8:35 pm

Problems in CAPSMAN after upgrade

Wed Feb 06, 2019 1:42 pm

After upgrade from 6.43.8 to 6.43.11 the "Registration Table" tab that shows the connected users associated is now reporting the interface as "unknown" see screenshots taken from two WLCs one still with the old version and another with the new one.
Could be just a listing problem but it could also affect the awareness of the users by the WLC ...

6.43.8
Image
https://www.dropbox.com/s/pqcusgpzz1rat ... 8.png?dl=0

6.43.11
Image
https://www.dropbox.com/s/h24081alo17j0 ... 1.png?dl=0

Note: Both the WLC (CHR) and the APs (wAP ac) were upgraded.

regards!
Last edited by pribeiro on Wed Feb 06, 2019 4:31 pm, edited 1 time in total.
 
bizzy
just joined
Posts: 2
Joined: Wed Feb 06, 2019 2:01 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 2:25 pm

After upgrading hEX and hAP ac from 6.43.8 to 6.43.11 (ROS and FW) samba got broken.
I got the following message in Windows 10:
\\router.lan\backup is not accessible. You might not have permission to use this network resource...
The parameter is incorrect.
I restored access to samba shares by downgrading hEX back to 6.43.8 and hAP ac to 6.43.10 (factory only release).

Confirm issue. Samba lose access after upgrade on firmware 6.43.11. Downgrade on 6.42.11 - restored access.
 
h17
just joined
Posts: 17
Joined: Wed Apr 16, 2014 10:01 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 4:08 pm

Both sides of your link have antennas, the gain is subtracted from the TX power (as it should be, according to regulations). The signal dropped by the amount because the TX power on the other end was reduced (also).
So, if I understood you correctly, before 6.43.11 antenna gain was also subtracted, but not enforced to be set whatsoever?
I had 0 there all the time before. Thought it means "default".

Anyway, I have short link (500m) with a few trees in the middle of LOS.
I put LHG-5HPnD (24.5dBi antenna gain) on one side and SXT Lite5 (16dBi) on the other.
Both are elevated. It's only couple of trees in the middle. And it's winter now.
I can't believe, respecting all regulations, my signal would be below -80dBm.
Not with such high gain antennas on so short distance.

To be precise, I (temporarily) upgraded only LHG. It was unbeareable. I was afraid to touch remote SXT,
because I don't have remote hands there and connection was unstable. I had to downgrade.
Any idea what is going on?
 
h17
just joined
Posts: 17
Joined: Wed Apr 16, 2014 10:01 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 4:18 pm

If the other side was not upgraded also, Rx signal strength shown here seems to be corrected by antenna gain, but this is just number. The problem causing link drops is that Tx power is reduced by antenna gain configured.
6.43.11 sets new minimum for antenna gain based on model.
Yup, that was my guess. Just couldn't believe the result would be so unpleasant.
You can still increase absolute transmit power by setting country to no_country_set and frequency-mode to superchannel, but unless the antenna is operating in shielded environment, the device probably violates local regulations, as it does with previous version and antenna gain set to 0 dB as well.
I get that. I wrote how my link looks like in the post few minutes ago. So crappy signal received over 500m? It doesn't compute in my head.
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 4:26 pm

*) wireless - improved antenna gain setting for devices with built in antennas;
How is this handled with capsman?
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
mkx
Forum Guru
Forum Guru
Posts: 2610
Joined: Thu Mar 03, 2016 10:23 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 4:27 pm

I put LHG-5HPnD (24.5dBi antenna gain) on one side and SXT Lite5 (16dBi) on the other.
Both are elevated. It's only couple of trees in the middle. And it's winter now.
I can't believe, respecting all regulations, my signal would be below -80dBm.
Not with such high gain antennas on so short distance.
Legal limits are about EIRP. EIRP is not Tx power at transmitter's RF connector, it's power at antenna perimeter. And that value is affected by antenna gain. Which is not how most of WiFi users (and, sadly, WISPs) understood things ...

Hence ... if legal limit is, say, 20dBm, substract 24.5dBi gain, add 0.1 dB cable loss and you get -4.4dBm (which is 0.363 mW) Tx power at LHG's power amplifier). Until now, actual Tx power was actually set to 20dBm (not taking antenna gain into account), so actual EIRP was 44.4dBm ...
BR,
Metod
 
pe1chl
Forum Guru
Forum Guru
Posts: 5575
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 4:34 pm

I get that. I wrote how my link looks like in the post few minutes ago. So crappy signal received over 500m? It doesn't compute in my head.
Maybe your link is not as good as you believed it was.
Actually, trees make a lot of attenuation, more so in summer than in winter but still.
And a LOS path is not only defined by "I see the remote antenna", you actually have to take the Fresnel zone into account.
(which means that halfway the path you need a larger unobstructed zone than at the endpoints)
 
User avatar
Anastasia
newbie
Posts: 32
Joined: Wed Oct 28, 2015 7:12 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 4:35 pm

IPsec settings are not saved and are reset. If you open through winbox when you log in IPsec - > Peers in one of the settings, the certificate settings are reset and does not save. I change the settings and then after a while they are reset again. when opened in winbox, it shines blue as if I had changed something, but I did not change anything. This is a bug, fix it Please!
You do not have the required permissions to view the files attached to this post.
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 882
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 4:49 pm

Legal limits are about EIRP. EIRP is not Tx power at transmitter's RF connector, it's power at antenna perimeter. And that value is affected by antenna gain. Which is not how most of WiFi users (and, sadly, WISPs) understood things ...
I remember attending a Netgear "seminar" back in 2005-2006ish about their WiFi products, and I was trying to explain to the presenter that their products violated the law about EIRP (based on what he was trying to push to us - an access point -with no tx power control- and a high-gain panel antenna to be used together).
He just could not fathom that that's the way you calculate the EIRP :lol:
 
pe1chl
Forum Guru
Forum Guru
Posts: 5575
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 5:08 pm

Tx power control is another thingie... as far as I know it is mandatory for EU 5.6 GHz outdoor WiFi (like DFS) but it isn't available in MikroTik.
 
h17
just joined
Posts: 17
Joined: Wed Apr 16, 2014 10:01 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 5:11 pm

Legal limits are about EIRP. EIRP is not Tx power at transmitter's RF connector, it's power at antenna perimeter. And that value is affected by antenna gain. Which is not how most of WiFi users (and, sadly, WISPs) understood things ...

Hence ... if legal limit is, say, 20dBm, substract 24.5dBi gain, add 0.1 dB cable loss and you get -4.4dBm (which is 0.363 mW) Tx power at LHG's power amplifier). Until now, actual Tx power was actually set to 20dBm (not taking antenna gain into account), so actual EIRP was 44.4dBm ...
I understand all that. Really. Just can't believe Mikrotik (until now) did not respect (or better word would be enforce) local regulations. I saw soooo many radiolinks based on MT with clear LOS (Fresnel zone 1) and signals levels below -70dBm. I'm guessing most of them would now stop working... if ISPs upgraded their MT's firmware. And they will if they do.
I always thought antenna_gain=0 means "set it for me", especially on hardware with built-in antennas.
 
pribeiro
just joined
Posts: 3
Joined: Mon Jul 24, 2017 8:35 pm

Re: Problems in CAPSMAN after upgrade

Wed Feb 06, 2019 5:34 pm

Forget. The problem has disappeared!
I've made a new WEBFIG access a few minutes ago and the interfaces are now correctly listed.
Probably the problem were some old CSS/JS not refreshed in the browser cache.
regards!
After upgrade from 6.43.8 to 6.43.11 the "Registration Table" tab that shows the connected users associated is now reporting the interface as "unknown" see screenshots taken from two WLCs one still with the old version and another with the new one.
Could be just a listing problem but it could also affect the awareness of the users by the WLC ...

6.43.8
Image
https://www.dropbox.com/s/pqcusgpzz1rat ... 8.png?dl=0

6.43.11
Image
https://www.dropbox.com/s/h24081alo17j0 ... 1.png?dl=0

Note: Both the WLC (CHR) and the APs (wAP ac) were upgraded.

regards!
 
dakotabcn
newbie
Posts: 29
Joined: Thu Apr 21, 2016 11:16 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 8:30 pm

HELP!
i have upgraded the RB4011 wireless and not work
the router flickers the lights of the SFP and the switch but it does not start, I've tried it in every way and it does not happen there, I had the 6.34.8 and updated this version this morning
I need help, because right now it is totally out of service, luckily I still keep the 951G and I can have internet, but I need to recover the RB4011

solved but with a strong dislike
I had to use netinstall to recover it
I have to reinstall everything again, this is not normal, if I had not had the reserve RB951 I would have everything stopped
Last edited by dakotabcn on Wed Feb 06, 2019 9:15 pm, edited 1 time in total.
 
HarryK
just joined
Posts: 5
Joined: Sat Apr 21, 2018 1:16 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 9:05 pm

After upgrading my RB3011, one of the CPUs peeks at 100% all the time (switches back and forth between CPUs). Anyone else with the same problem?
 
afhpwnd
just joined
Posts: 1
Joined: Wed Feb 06, 2019 9:16 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 9:20 pm

samba got broken after upgrade rb951ui-2hnd from 6.43.8 to 6.43.11.
When you make speed smb more than 5-6MB\s ?
 
Kindis
Member Candidate
Member Candidate
Posts: 245
Joined: Tue Nov 01, 2011 6:54 pm

Re: v6.43.11 [stable] is released!

Wed Feb 06, 2019 9:42 pm

After upgrading my RB3011, one of the CPUs peeks at 100% all the time (switches back and forth between CPUs). Anyone else with the same problem?
No both of mine are just fine. Have you updated firmware and rebooted a second time?
 
florid
newbie
Posts: 26
Joined: Wed Dec 20, 2017 6:27 am

Re: v6.43.11 [stable] is released!

Thu Feb 07, 2019 1:21 am

Anyone noticed interface connectivity issue after upgrade?
I have a remote HEX POE. No issue with the firmware upgrade. Rebooted twice and looks good. I can remote access the box via winbox without any issue.
But after a third reboot, I noticed one interface to Synology NAS only has TX packet but very little RX packet. I also have difficulty to access that NAS.
On HEX POE remote, I can ping NAS IP, but no access to any TCP/UDP ports of the NAS. My first thought was there's something wrong with the NAS firewall/iptables that blocked inbound requests. But there's even no outbound traffic from NAS that surprised me. Then I believe it must be some connectivity issue between the router and the NAS.
Because those devices are remote, my last resort is to reboot the HEX POE router forth time. Then everything backs to normal.

Not really sure if it is Mikrotik related. But I am happy to provide support file if Mikrotik is interested.
 
i4ko
just joined
Posts: 14
Joined: Sat Sep 26, 2015 9:23 pm

Re: v6.43.11 [stable] is released!

Thu Feb 07, 2019 6:58 am

I put LHG-5HPnD (24.5dBi antenna gain) on one side and SXT Lite5 (16dBi) on the other.
Both are elevated. It's only couple of trees in the middle. And it's winter now.
I can't believe, respecting all regulations, my signal would be below -80dBm.
Not with such high gain antennas on so short distance.
Legal limits are about EIRP. EIRP is not Tx power at transmitter's RF connector, it's power at antenna perimeter. And that value is affected by antenna gain. Which is not how most of WiFi users (and, sadly, WISPs) understood things ...

Hence ... if legal limit is, say, 20dBm, substract 24.5dBi gain, add 0.1 dB cable loss and you get -4.4dBm (which is 0.363 mW) Tx power at LHG's power amplifier). Until now, actual Tx power was actually set to 20dBm (not taking antenna gain into account), so actual EIRP was 44.4dBm ...
Disclaimer, I'm not a radio guy, but I'm not sure that is correct based on what I remember from my army radio training and the radio relay class I had with a vendor from Scandinavia 15 years ago (around 27GHz). Antennas are passive elements, the power radiated at the antenna is always less than the power fed to it. Antenna "gain" describes the efficiency of the antenna to convert radio waves into electricity. It is always less than 1. You do subtract/reduce the antenna gain (though we always expressed it as ratio) only when receiving in order to set your high frequency receive amplifiers correctly to avoid signal clipping on the low frequency side, but there is no such thing when transmitting, as the antenna reduces the signal. Now, that may have been something specific to the antennas and the equipment we were using, but it is physically impossible for an antenna to radiate more power than the amplifier sends to it, e.g. if your amplifier is sending out 10W what gets radiated in the air is always less than those 10W, so you need to increase the power of the amplifier to account for the inefficiency at of the antenna on the transmit side
Though I'm sure the army training is for war time when things like observing radiated power regulations don't have top priority.
 
andriys
Forum Guru
Forum Guru
Posts: 1116
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.43.11 [stable] is released!

Thu Feb 07, 2019 7:24 am

i4ko, EIRP is not so much about the power as about the density of radiation, so for directional antennas the gain may easily be much higher than 1.
 
i4ko
just joined
Posts: 14
Joined: Sat Sep 26, 2015 9:23 pm

Re: v6.43.11 [stable] is released!

Thu Feb 07, 2019 7:35 am

i4ko, EIRP is not so much about the power as about the density of radiation, so for directional antennas the gain may easily be much higher than 1.
Thanks Andriys. But isn't EIRP by definition equal distribution in 360 degree in all 3 directions (sphere), hence being called isotropic. A directional antenna will emit in roughly a cone, so if that cone is inside a sphere (same center/top of cone) it can concentrate much more radiation inside the volume of the cone while still having the same total radiation in the volume of the sphere.
 
mkx
Forum Guru
Forum Guru
Posts: 2610
Joined: Thu Mar 03, 2016 10:23 pm

Re: v6.43.11 [stable] is released!

Thu Feb 07, 2019 8:50 am

But isn't EIRP by definition equal distribution in 360 degree in all 3 directions (sphere), hence being called isotropic. A directional antenna will emit in roughly a cone, so if that cone is inside a sphere (same center/top of cone) it can concentrate much more radiation inside the volume of the cone while still having the same total radiation in the volume of the sphere.

A quote from Wikipedia puts it nicely:
Effective radiated power (ERP), synonymous with equivalent radiated power, is an IEEE standardized definition of directional radio frequency (RF) power, such as that emitted by a radio transmitter. It is the total power in watts that would have to be radiated by a half-wave dipole antenna to give the same radiation intensity (signal strength in watts per square meter) as the actual source at a distant receiver located in the direction of the antenna's strongest beam (main lobe).
(it then goes on describing how EIRP differs from ERP, but distinction is not really relevant for this debate).

So, EIRP takes into account antenna gain ... If you think of it, legal limits are set to protect public (or whoever) from high EM field powers (or excess interference to other users in case of ISM bands) and "worst" case should be considered. From that point of view, antenna main lobe is the worst case.

Though I'm sure the army training is for war time when things like observing radiated power regulations don't have top priority.
That's quite right and probably any army around the world follows this principle also in peace-time most of the time :wink:
BR,
Metod
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43.11 [stable] is released!

Thu Feb 07, 2019 9:57 am

Anyone noticed interface connectivity issue after upgrade? [...]
I saw this on a device that had internet detection enabled. Try this:
/ interface detect-internet set detect-interface-list=none;
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
myhaycracyun
just joined
Posts: 3
Joined: Mon Jul 09, 2018 4:20 pm

Re: v6.43.11 [stable] is released!

Thu Feb 07, 2019 12:43 pm

I have a MIKRO TIK RBwAPG-60ad KIT.

1.

First time I had 6.42.5 and was with the Master and Slave.
Then I updated from 6.42.5 to 6.43.7 and today at 6.43.11.
Since then (6.45.5) when I want to see the status of both units, the values are updating very very slow or nothing at all. (signal, mcs, PHY Rate, RSSI).
When I had 6.42.5, the values were updating very fast, in real time, when the traffic was high or slow.
Now on 6.43.7 or 6.43.11 as I said, the values are updating very very slow. I have to reboot the units to see real values.
Any ideas?

2.

I have on one unit (receiver): 110 m, signal 95, mcs 8, phy 2.3 Gbps and rssi -56 to - -62.
I have on the second unit (signal with the internet input): signal 65, mcs 8
a. Are good values for this distance? Was it supposed to be better?
b. signal and mcs must be the same on both units?

Sometimes I have to give some more restarts to get good values for the mc and rssi signals. It is normal ?

transmitter.jpg
receiver.jpg
You do not have the required permissions to view the files attached to this post.
 
chriscolden
just joined
Posts: 9
Joined: Fri May 04, 2018 3:41 pm

Re: v6.43.11 [stable] is released!

Thu Feb 07, 2019 1:06 pm

Any update on when the access port issue on the RB3011 will be fixed. Only some of the traffic is tagged with a vlan id. I reported to support back in September. Thanks
 
anuser
Member
Member
Posts: 372
Joined: Sat Nov 29, 2014 7:27 pm

Re: v6.43.11 [stable] is released!

Thu Feb 07, 2019 2:02 pm

6.43.11: cAP AC + CCR running as CAPSMAN based forwarding: 2.4Ghz has terrible performance / disconnect issues. Back to 6.43.8

Who is online

Users browsing this forum: No registered users and 7 guests