Community discussions

 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 444
Joined: Thu Dec 11, 2014 8:53 am

v6.44 [stable] is released!

Tue Feb 26, 2019 9:20 am

RouterOS version 6.44 has been released in public "stable" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 6.44 (2019-Feb-25 14:11):

MAJOR CHANGES IN v6.44:
----------------------
!) cloud - added command "/system backup cloud" for backup storing on cloud (CLI only);
!) ipsec - added new "identity" menu with common peer distinguishers;
!) ipsec - removed "main-l2tp" exchange-mode, it is the same as "main" exchange-mode;
!) ipsec - removed "users" menu, XAuth user configuration is now handled by "identity" menu;
!) radius - initial implementation of RadSec (RADIUS communication over TLS);
!) speedtest - added "/tool speed-test" for ping latency, jitter, loss and TCP and UDP download, upload speed measurements (CLI only);
----------------------

Changes in this release:

*) bgp - properly update keepalive time after peer restart;
*) bridge - added option to monitor fast-forward status;
*) bridge - count routed FastPath packets between bridge ports under FastPath bridge statistics;
*) bridge - disable fast-forward when using SlowPath features;
*) bridge - fixed BOOTP packet forwarding when DHCP Snooping is enabled;
*) bridge - fixed DHCP Option 82 parsing when using DHCP Snooping;
*) bridge - fixed log message when hardware offloading is being enabled;
*) bridge - fixed packet forwarding when changing MSTI VLAN mappings;
*) bridge - fixed packet forwarding with enabled DHCP Snooping and Option 82;
*) bridge - fixed possible memory leak when using MSTP;
*) bridge - fixed system's identity change when DHCP Snooping is enabled (introduced in v6.43);
*) bridge - improved packet handling when hardware offloading is being disabled;
*) bridge - improved packet processing when bridge port changes states;
*) btest - added multithreading support for both UDP and TCP tests;
*) btest - added warning message when CPU load exceeds 90% (CLI only);
*) capsman - always accept connections from loopback address;
*) certificate - added support for multiple "Subject Alt. Names";
*) certificate - enabled RC2 cipher to allow P12 certificate decryption;
*) certificate - fixed certificate signing by SCEP client if multiple CA certificates are provided;
*) certificate - show digest algorithm used in signature;
*) chr - assign interface names based on underlying PCI device order on KVM;
*) chr - distribute NIC queue IRQ's evenly across all CPUs;
*) chr - fixed IRQ balancing when using more than 32 CPUs;
*) chr - improved system stability when insufficient resources are allocated to the guest;
*) cloud - added "ddns-update-interval" parameter;
*) cloud - do not reuse old UDP socket if routing changes are detected;
*) cloud - ignore "force-update" command if DDNS is disabled;
*) cloud - improved DDNS service disabling;
*) cloud - made address updating faster when new public address detected;
*) conntrack - added new "loose-tcp-tracking" parameter (equivalent to "nf_conntrack_tcp_loose" in netfilter);
*) console - renamed IP protocol 41 to "ipv6-encap";
*) console - updated copyright notice;
*) crs317 - fixed packet forwarding when LACP is used with hw=no;
*) crs3xx - fixed packet forwarding through SFP+ ports when using 100Mbps link speed;
*) crs3xx - improved fan control stability;
*) defconf - fixed configuration not generating properly on upgrade;
*) defconf - fixed default configuration loading on RB4011iGS+5HacQ2HnD-IN;
*) defconf - fixed IPv6 link-local address range in firewall rules;
*) dhcp - added "allow-dual-stack-queue" setting for IPv4/IPv6 DHCP servers to control dynamic lease/binding behaviour;
*) dhcp - properly load DHCP configuration if options are configured;
*) dhcpv4-server - added "parent-queue" parameter (CLI only);
*) dhcpv4-server - added "User-Name" attribute to RADIUS accounting messages;
*) dhcpv4-server - fixed service becoming unresponsive after interface leaves and enters the same bridge;
*) dhcpv4-server - use ARP for conflict detection;
*) dhcpv6-client - use default route distance also for unreachable route added by DHCPv6 client;
*) dhcpv6-server - allow to add DHCPv6 server with pool that does not exist;
*) dhcpv6-server - fixed missing gateway for binding's network if RADIUS authentication was used;
*) dhcpv6-server - improved DHCPv6 server stability when using "print" command;
*) dhcpv6-server - show "client-address" parameter for bindings;
*) discovery - detect proper slave interface on bounded interfaces;
*) discovery - fixed malformed neighbor information for routers that has incomplete IPv6 configuration;
*) discovery - send master port in "interface-name" parameter;
*) discovery - show neighbors on actual bridge port instead of bridge itself for LLDP;
*) e-mail - added info log message when e-mail is sent successfully;
*) e-mail - added support for multiple transactions on single connection;
*) ethernet - added "tx-rx-1024-max" counter to Ethernet stats;
*) ethernet - fixed IPv4 and IPv6 packet forwarding on IPQ4018 devices;
*) ethernet - fixed linking issues on wAP ac, RB750Gr2 and Metal 52 ac (introduced in v6.43rc52);
*) ethernet - fixed packet forwarding when SFP interface is disabled on hEX S;
*) ethernet - fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices;
*) ethernet - improved per core ethernet traffic classificator on mmips devices;
*) export - fixed "silent-boot" compact export;
*) fetch - added "http-header-field" parameter;
*) fetch - added option to specify multiple headers under "http-header-field", including content type;
*) fetch - fixed "without-paging" option;
*) fetch - improved file downloading to slow memory;
*) fetch - improved stability when using HTTP mode;
*) fetch - removed "http-content-type" parameter;
*) gps - increase precision for dd format;
*) gps - moved "coordinate-format" from "monitor" command to "set" parameter;
*) health - improved fan control stability on CRS328-24P-4S+RM;
*) hotspot - added "https-redirect" under server profiles;
*) hotspot - added per-user NAT rule generation based on "incoming-filter" and "outgoing-filter" parameters;
*) ike1 - do not allow using RSA-key and RSA-signature authentication methods simultaneously on single peer;
*) ike1 - fixed memory leak;
*) ike2 - added option to specify certificate chain;
*) ike2 - added peer identity validation for RSA auth (disabled after upgrade);
*) ike2 - allow to match responder peer by "my-id=fqdn" field;
*) ike2 - fixed local address lookup when initiating new connection;
*) ike2 - improved subsequent phase 2 initialization when no childs exist;
*) ike2 - properly handle certificates with empty "Subject";
*) ike2 - retry RSA signature validation with deduced digest from certificate;
*) ike2 - send split networks over DHCP (option 249) to Windows initiators if DHCP Inform is received;
*) ike2 - show weak pre-shared-key warning;
*) interface - added "pwr-line" interface support (more information will follow in next newsletter);
*) ipsec - added account log message when user is successfully authenticated;
*) ipsec - added basic pre-shared-key strength checks;
*) ipsec - added new "remote-id" peer matcher;
*) ipsec - allow to specify single address instead of IP pool under "mode-config";
*) ipsec - fixed active connection killing when changing peer configuration;
*) ipsec - fixed all policies not getting installed after startup (introduced in v6.43.8);
*) ipsec - fixed stability issues after changing peer configuration (introduced in v6.43);
*) ipsec - hide empty prefixes on "peer" menu;
*) ipsec - improved invalid policy handling when a valid policy is uninstalled;
*) ipsec - made dynamic "src-nat" rule more specific;
*) ipsec - made peers autosort themselves based on reachability status;
*) ipsec - moved "profile" menu outside "peer" menu;
*) ipsec - properly detect AES-NI extension as hardware AEAD;
*) ipsec - removed limitation that allowed only single "auth-method" with the same "exchange-mode" as responder;
*) ipsec - require write policy for key generation;
*) kidcontrol - added IPv6 support;
*) kidcontrol - added "reset-counters" command for "device" menu (CLI only);
*) kidcontrol - added statistics web interface for kids (http://router.lan/kid-control);
*) kidcontrol - added "tur-fri", "tur-mon", "tur-sat", "tur-sun", "tur-thu", "tur-tue", "tur-wed" parameters;
*) kidcontrol - dynamically discover devices from DNS activity;
*) kidcontrol - fixed validation checks for time intervals;
*) kidcontrol - properly detect time zone changes;
*) kidcontrol - use "/128" prefix-length for IPv6 addresses;
*) l2tp - fixed IPsec secret not being updated when "ipsec-secret" is changed under L2TP client configuration;
*) lcd - made "pin" parameter sensitive;
*) led - fixed default LED configuration for RBSXTsq-60ad;
*) led - fixed default LED configuration for wAP 60G AP devices;
*) led - fixed PWR-LINE AP Ethernet LED polarity ("/system routerboard upgrade" required);
*) lldp - fixed missing capabilities fields on some devices;
*) log - accumulate multiple e-mail messages before sending;
*) lte - added additional ID support for Novatel USB730L modem;
*) lte - added "cell-monitor" command for R11e-LTE international modem (CLI only);
*) lte - added "ecno" field for "info" command;
*) lte - added "firmware-upgrade" command for R11e-LTE international modems (CLI only);
*) lte - added initial support for multiple APN for R11e-4G (new modem firmware required);
*) lte - added initial support for Telit LN940;
*) lte - added multiple APN support for R11e-4G;
*) lte - added option to lock the LTE operator;
*) lte - added support for JioFi JMR1040 modem;
*) lte - fixed connection issue when LTE modem was de-registered from network for more than 1 minute;
*) lte - fixed DHCP IP acquire (introduced in v6.43.7);
*) lte - fixed DHCP relay packet forwarding when in passthrough mode;
*) lte - fixed IPv6 activation for R11e-LTE-US modems;
*) lte - fixed Jaton/SQN modems preventing router from booting properly;
*) lte - fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
*) lte - fixed missing running (R) flag for Jaton LTE modems;
*) lte - fixed passthrough DHCP address forward when other address is acquired from operator;
*) lte - fixed reported "rsrq" precision (introduced in v6.43.8);
*) lte - improved compatibility for Alt38xx modems;
*) lte - improved SIM7600 initialization after reset;
*) lte - improved SimCom 7100e support;
*) lte - query "cfun" on initialization;
*) lte - require write policy for at-chat;
*) lte - update firmware version information after R11e-LTE/R11e-4G firmware upgrade;
*) netinstall - do not show kernel failure critical messages in the log after fresh install;
*) ntp-client - fixed "dst-active" and "gmt-offset" being updated after synchronization with server;
*) port - improved "remote-serial" TCP performance in RAW mode;
*) ppp - added "at-chat" command;
*) ppp - fixed dynamic route creation towards VPN server when "add-default-route" is used;
*) profiler - classify kernel crypto processing as "encrypting";
*) profile - removed obsolete "file-name" parameter;
*) proxy - removed port list size limit;
*) radius - implemented Proxy-State attribute handling in CoA and disconnect requests;
*) rb3011 - implemented multiple engine IPsec hardware acceleration support;
*) rb4011 - fixed SFP+ interface full duplex and speed parameter behavior;
*) rb4011 - improved SFP+ interface linking to 1Gbps;
*) rbm33g - improved stability when used with some USB devices;
*) romon - improved reliability when processing RoMON packets on CHR;
*) routerboard - removed "RB" prefix from PWR-LINE AP devices;
*) routerboard - require at least 10 second interval between "reformat-hold-button" and "max-reformat-hold-button";
*) smb - added commenting option for SMB users (CLI only);
*) smb - fixed macOS clients not showing share contents;
*) smb - fixed Windows 10 clients not able to establish connection to share;
*) sniffer - save packet capture in "802.11" type when sniffing on w60g interface in "sniff" mode;
*) snmp - added "dot1qPortVlanTable" and "dot1dBasePortTable" OIDs;
*) snmp - changed fan speed value type to Gauge32;
*) snmp - fixed "rsrq" reported precision;
*) snmp - fixed w60g station table;
*) snmp - removed "rx-sector" ("Wl60gRxSector") value;
*) snmp - report bridge ifSpeed as "0";
*) snmp - report ifSpeed 0 for sub-layer interfaces;
*) ssh - added "allow-none-crypto" parameter to disable "none" encryption usage (CLI only);
*) ssh - added error log message when key exchange fails;
*) ssh - close active SSH connections before IPsec connections on shutdown;
*) ssh - fixed public key format compatibility with RFC4716;
*) supout - fixed "poe-out" output not showing all interfaces;
*) supout - fixed Profile output on single core devices;
*) switch - added comment field to switch ACL rules;
*) switch - fixed ACL rules on IPQ4018 devices;
*) system - accept only valid path for "log-file" parameter in "port" menu;
*) system - removed obsolete "/driver" command;
*) tr069-client - added "check-certificate" parameter to allow communication without certificates;
*) tr069-client - added "connection-request-port" parameter (CLI only);
*) tr069-client - added support for InformParameter object;
*) tr069-client - fixed certificate verification for certificates with IP address;
*) tr069-client - fixed HTTP cookie getting duplicated with the same key;
*) tr069-client - increased reported "rsrq" precision;
*) traceroute - improved stability when sending large ping amounts;
*) traffic-flow - reduced minimal value of "active-flow-timeout" parameter to 1s;
*) tunnel - properly clear dynamic IPsec configuration when removing/disabling EoIP with DNS as "remote-address";
*) upgrade - made security package depend on DHCP package;
*) usb - improved power-reset error message when no bus specified on CCR1072-8G-1S+;
*) usb - improved USB device powering on startup for hAP ac^2 devices;
*) usb - increased default power-reset timeout to 5 seconds;
*) userman - added first and last name fields for signup form;
*) userman - show redirect location in error messages;
*) user - require "write" permissions for LTE firmware update;
*) vrrp - made "password" parameter sensitive;
*) w60g - added "10s-average-rssi" parameter to align mode (CLI only);
*) w60g - added align mode "/interface w60g align" (CLI only);
*) w60g - fixed scan in bridge mode;
*) w60g - improved PtMP performance;
*) w60g - improved reconnection detection;
*) w60g - improved "tx-packet-error-rate" reading;
*) w60g - renamed disconnection message when license level did not allow more connected clients;
*) w60g - renamed "frequency-list" to "scan-list";
*) watchdog - allow specifying DNS name for "send-smtp-server" parameter;
*) webfig - improved file handling;
*) winbox - added 4th chain selection for "HT TX chains" and "HT RX chains" under "CAPsMAN/CAP Interface/Wireless" tab;
*) winbox - added "allow-dual-stack-queue" parameter in "IP/DHCP Server" and "IPv6/DHCP Server" menus;
*) winbox - added "challenge-password" field when signing certificate with SCEP;
*) winbox - added "conflict-detection" parameter in "IP/DHCP Server" menu;
*) winbox - added "coordinate-format" parameter in LTE interface settings;
*) winbox - added "radio-name" setting to "CAPsMAN/CAP Interface/General" tab;
*) winbox - added "secondary-channel" setting to "CAPsMAN/CAP Interface/Channel" tab;
*) winbox - added src/dst address and in/out interface list columns to default firewall menu view;
*) winbox - added support for dynamic devices in "IP/Kid Control/Devices" tab;
*) winbox - allow setting "network-mode" to "auto" under LTE interface settings;
*) winbox - allow specifying interface lists in "CAPsMAN/Access List" menu;
*) winbox - fixed "IPv6/Firewall" "Connection limit" parameter not allowing complete IPv6 prefix lengths;
*) winbox - fixed L2MTU parameter setting on "W60G" type interfaces;
*) winbox - fixed "LCD" menu not shown on RB2011UiAS-2HnD;
*) winbox - fixed missing w60g interface status values;
*) winbox - improved file handling;
*) winbox - moved "Too Long" statistics counter to Ethernet "Rx Stats" tab;
*) winbox - organized wireless parameters between simple and advanced modes;
*) winbox - renamed "Default AP Tx Rate" to "Default AP Tx Limit";
*) winbox - renamed "Default Client Tx Rate" to "Default Client Tx Limit";
*) winbox - show "R" flag under "IPv6/DHCP Server/Bindings" tab;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
*) winbox - show "W60G" wireless tab on wAP 60G AP;
*) wireless - added new "installation" parameter to specify router's location;
*) wireless - improved AR5212 response to incoming ACK frames;
*) wireless - improved connection stability for new model Apple devices;
*) wireless - improved NV2 performance for all ARM devices;
*) wireless - improved signal strength at low TX power on LHG 5 ac, LHG 5 ac XL and LDF 5 ac ("/system routerboard upgrade" required);
*) wireless - improved system stability for all ARM devices with wireless;
*) wireless - improved system stability for all devices with 802.11ac wireless;
*) wireless - improved system stability when scanning for other networks;
*) wireless - removed G/N support for 2484MHz in "japan" regulatory domain;
*) wireless - report last seen IP address in RADIUS accounting messages;
*) wireless - show "installation" parameter when printing configuration;

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device

Please keep this forum topic strictly related to this concrete RouterOS release.
 
User avatar
ziegenberg
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Thu Mar 07, 2013 11:14 am
Location: Vienna
Contact:

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 9:41 am

Congratulations on this massive release with 236 changes. I'm really looking forward to test.
Thx a lot!
 
Kampfwurst
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Mar 24, 2014 2:53 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 10:14 am

On my CRS106-1C-5S the cloud is not workig anymore with the Version 6.44.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 23993
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 10:15 am

What specifically is not working ? Any errors ?
No answer to your question? How to write posts
 
jnygard
just joined
Posts: 22
Joined: Mon Oct 07, 2013 3:05 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 10:21 am

I got new features on my hAP mini!

Interface #3, pwr-line1
Flags: D - dynamic, X - disabled, R - running, S - slave 
 #     NAME                                TYPE       ACTUAL-MTU L2MTU  MAX-L2MTU
 0  RS ether1-GW                           ether            1500  1598       2028
 1  RS ether2-Telia                        ether            1500  1598       2028
 2  RS ether3-RaspberryPi                  ether            1500  1598       2028
 3     pwr-line1                           ether            1500  1598       2028
 4  XS wlan-2GHz                           wlan             1500  1600       2290
 5  R  LAN                                 bridge           1500  1598
 6  R  LAN-Telia                           bridge           1500  1598
 7  RS vlan-LAN                            vlan             1500  1594
 
Łukasz
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Mon Mar 05, 2012 6:03 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 10:26 am

v6.44 does not contain:
""!) winbox - improvements in connection handling to router with open winbox service (CVE-2019–3924);" ?
It is no information in changelog.
 
Kampfwurst
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Mar 24, 2014 2:53 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 10:30 am

no errors in the log.
I have checked the Internet but when I use IP/ Cloud/ and Force Update nothing happend. Also if i trie to upload a backup file to the cloud. Then i get connectin error in the terminal.
 
baragoon
Member Candidate
Member Candidate
Posts: 121
Joined: Thu Jan 05, 2017 10:38 am
Location: Kyiv, UA

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 10:40 am

v6.44 does not contain:
""!) winbox - improvements in connection handling to router with open winbox service (CVE-2019–3924);" ?
It is no information in changelog.
The issue is fixed in:

6.43.12 (2019-02-11 14:39)
6.44beta75 (2019-02-11 15:26)
6.42.12 (2019-02-12 11:46)
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1716
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 10:42 am

v6.44 does not contain:
""!) winbox - improvements in connection handling to router with open winbox service (CVE-2019–3924);" ?
It is no information in changelog.
these changes are starting from v6.43.12, this change was already there, so it will not show up in 6.44 changelog
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1716
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 10:43 am

I got new features on my hAP mini!

Interface #3, pwr-line1
Flags: D - dynamic, X - disabled, R - running, S - slave 
 #     NAME                                TYPE       ACTUAL-MTU L2MTU  MAX-L2MTU
 0  RS ether1-GW                           ether            1500  1598       2028
 1  RS ether2-Telia                        ether            1500  1598       2028
 2  RS ether3-RaspberryPi                  ether            1500  1598       2028
 3     pwr-line1                           ether            1500  1598       2028
 4  XS wlan-2GHz                           wlan             1500  1600       2290
 5  R  LAN                                 bridge           1500  1598
 6  R  LAN-Telia                           bridge           1500  1598
 7  RS vlan-LAN                            vlan             1500  1594
*) interface - added "pwr-line" interface support (more information will follow in next newsletter);
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
Kindis
Member Candidate
Member Candidate
Posts: 240
Joined: Tue Nov 01, 2011 6:54 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 10:45 am

Deleted as question was answered above
 
Simono
newbie
Posts: 49
Joined: Tue Mar 20, 2018 9:41 am

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 11:09 am

*) winbox - allow specifying interface lists in "CAPsMAN/Access List" menu;
When on Access List I set interface list as interface on log got
rejected, forbidden by access-lis
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8273
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 11:12 am

*) hotspot - added "https-redirect" under server profiles;
Is there an up-to-date manual on Hotspot? Or at least what does that option do?
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3069
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 11:25 am

Congratulations on this massive release with 236 changes. I'm really looking forward to test.
Thx a lot!
236 changes to have new bugs introduced.....
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3069
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 11:31 am

!) speedtest - added "/tool speed-test" for ping latency, jitter, loss and TCP and UDP download, upload speed measurements (CLI only);
Just updated one SXT-Lite5ac connected to a 6.43.12 Netmetal and making the test to a 6.43.4 CCR

Where is the jitter? Where is the download result?
Package loss is stated as 100% (200/200) what does that mean?


New Speedtest CLI.JPG
You do not have the required permissions to view the files attached to this post.
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.
 
User avatar
ognjen
newbie
Posts: 35
Joined: Wed Nov 15, 2017 10:31 am
Location: Serbia

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 11:50 am

Below model don't have problem in my environment (I have 1-6 per model)
RB3011UiAS
RB2011UAS
CRS326-24G-2S+
CRS125-24G-1S-2HnD
RB921GS-5HPacD r2
RBLHG G-5acD-XL
SXT 5nD r2
RBwAP G-5HacT2HnD
RBwAP 2nD r2
RB433
RB750
RB960PGS

@WirelessRudy
If you set BTEST Authenticate, you need use full command like:
/tool speed-test user=YourUsernmae password=YourPassword address=10.30.30.30
Be careful with MikroTik Firewall because you can cut the line [yourself - MikroTik] :shock:
Image
 
anav
Forum Guru
Forum Guru
Posts: 2820
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 12:20 pm

and I thought MT code was close to perfect already. ;-)
Seriously, congrats to the team, this kind of effort is massive, I hope Normis gives them a few hours off!!
I'd rather manage rats than software. Follow my advice at your own risk! (Sob & mkx forced me to write that!)
 
Note
newbie
Posts: 49
Joined: Fri Jun 03, 2016 12:39 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 12:26 pm

2011 ok

951G ok

hap ac lite...................... couldn't update to stable or testing from 6.43.11, went to 6.42.12 long..... ok. Retries to stable or beta nothing...... still stuck on long term.


u can get the support file from here.

https://mega.nz/#!JnZ1iIZL!MT9wQ2vhAXA4 ... _xZnMMqljo
 
User avatar
skylark
MikroTik Support
MikroTik Support
Posts: 92
Joined: Wed Feb 10, 2016 3:55 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 12:39 pm

2011 ok

951G ok

hap ac lite...................... couldn't update to stable or testing from 6.43.11, went to 6.42.12 long..... ok. Retries to stable or beta nothing...... still stuck on long term.


u can get the support file from here.

https://mega.nz/#!JnZ1iIZL!MT9wQ2vhAXA4 ... _xZnMMqljo
Take a look at the log entries:
"11:58:41 system,error not enough space for upgrade "
 
User avatar
Lifz
newbie
Posts: 32
Joined: Tue Feb 26, 2013 1:05 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 12:44 pm

2011 ok

951G ok

hap ac lite...................... couldn't update to stable or testing from 6.43.11, went to 6.42.12 long..... ok. Retries to stable or beta nothing...... still stuck on long term.


u can get the support file from here.

https://mega.nz/#!JnZ1iIZL!MT9wQ2vhAXA4 ... _xZnMMqljo
You should not use Extra package bundle on devices with 16MiB disk space.
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3069
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 12:58 pm

@WirelessRudy
If you set BTEST Authenticate, you need use full command like:
/tool speed-test user=YourUsernmae password=YourPassword address=10.30.30.30
I've done that but see no difference

The 'status' shows that the test is performing the different tests (udp and tcp up- and download) but comes back with status "done". No further info.

Maybe both the units engaged in the test have to be running 6.44? (I am not ready for that. Not going to to upgrade my main routers towards this new 6.44 for at least a week or two..... 6.44 has to proof itself first....
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.
 
lvader
just joined
Posts: 2
Joined: Tue Mar 27, 2018 8:10 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 1:35 pm

*) defconf - fixed IPv6 link-local address range in firewall rules;
a bit more details on this change? Those default rules are not upgraded automatically, so it would be good to see what exactly changed.
And in overall, it would be good to keep on wiki defconfs for each big releases.
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5886
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 1:58 pm

filter add chain=input action=accept protocol=udp dst-port=546 src-address=fe80::/16 comment="defconf: accept DHCPv6-Client prefix delegation."
changed to:
filter add chain=input action=accept protocol=udp dst-port=546 src-address=fe80::/10 comment="defconf: accept DHCPv6-Client prefix delegation."
 
martinclaro
just joined
Posts: 6
Joined: Sat Sep 28, 2013 6:08 am
Location: Buenos Aires, Argentina
Contact:

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 2:00 pm

Upgraded a RB851G (both RouterOS and RouterBOOT) from 6.42.12 today. I get errors every time I try to save a backup file (both local and cloud, same error).
[admin@xxxx] > /system backup save 
Saving system configuration
Configuration backup saved
08:54:42 echo: backup,critical error creating backup file: could not read all configuration files

[admin@xxxx] > /system resource print 
                   uptime: 41m36s
                  version: 6.44 (stable)
               build-time: Feb/25/2019 14:11:04
              free-memory: 100.9MiB
             total-memory: 128.0MiB
                      cpu: MIPS 74Kc V4.12
                cpu-count: 1
            cpu-frequency: 600MHz
                 cpu-load: 1%
           free-hdd-space: 108.2MiB
          total-hdd-space: 128.0MiB
  write-sect-since-reboot: 1252
         write-sect-total: 27904308
               bad-blocks: 0%
        architecture-name: mipsbe
               board-name: RB951G-2HnD
                 platform: MikroTik
Martín C. @ TopHost Soluciones
MTCNA / MTCTCE
CCR1009-7G-1C-1S+ / CHR / RB760iGS (hEX S) / RB962UiGS (hAP ac) / RB951G / mAP-2n / wAP-ac / RBwAPG-60ad-A (wAP 60G AP) / CRS326-24G-2S+
 
User avatar
eworm
Member
Member
Posts: 326
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 2:02 pm

Upgraded a RB851G (both RouterOS and RouterBOOT) from 6.42.12 today. I get errors every time I try to save a backup file (both local and cloud, same error).
[admin@xxxx] > /system backup save 
Saving system configuration
Configuration backup saved
08:54:42 echo: backup,critical error creating backup file: could not read all configuration files
Try to regenerate the ssh host keys:
/ ip ssh regenerate-host-key
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
martinclaro
just joined
Posts: 6
Joined: Sat Sep 28, 2013 6:08 am
Location: Buenos Aires, Argentina
Contact:

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 2:15 pm

Upgraded a RB851G (both RouterOS and RouterBOOT) from 6.42.12 today. I get errors every time I try to save a backup file (both local and cloud, same error).
[admin@xxxx] > /system backup save 
Saving system configuration
Configuration backup saved
08:54:42 echo: backup,critical error creating backup file: could not read all configuration files
Try to regenerate the ssh host keys:
/ ip ssh regenerate-host-key
Thank you @eworm! You nailed it! I was just reading this other thread where you had the same issue, but for a previous version.
Martín C. @ TopHost Soluciones
MTCNA / MTCTCE
CCR1009-7G-1C-1S+ / CHR / RB760iGS (hEX S) / RB962UiGS (hAP ac) / RB951G / mAP-2n / wAP-ac / RBwAPG-60ad-A (wAP 60G AP) / CRS326-24G-2S+
 
raffav
Member Candidate
Member Candidate
Posts: 278
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 2:38 pm

Nice MK,

Very big changes log, just waiting for the next Beta/rc version
 
zandhaas
newbie
Posts: 36
Joined: Tue Dec 11, 2018 11:02 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 2:46 pm

No upgrade issues on RB750gr3 and HAPac2.

Hopefully the wireless on the HAPac2 is more stable as before.
 
User avatar
jenechka
newbie
Posts: 27
Joined: Sat Oct 29, 2016 4:30 pm
Location: Russian Federation, Siberia

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 3:03 pm

problem(
You do not have the required permissions to view the files attached to this post.
 
ofer
newbie
Posts: 47
Joined: Wed May 23, 2018 11:45 am

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 3:06 pm

Updated 3x HapAC everything seems to be ok, will test fixes later.

Thanks for the effort!
 
Note
newbie
Posts: 49
Joined: Fri Jun 03, 2016 12:39 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 3:14 pm

2011 ok

951G ok

hap ac lite...................... couldn't update to stable or testing from 6.43.11, went to 6.42.12 long..... ok. Retries to stable or beta nothing...... still stuck on long term.


u can get the support file from here.

https://mega.nz/#!JnZ1iIZL!MT9wQ2vhAXA4 ... _xZnMMqljo
Take a look at the log entries:
"11:58:41 system,error not enough space for upgrade "
2011 ok

951G ok

hap ac lite...................... couldn't update to stable or testing from 6.43.11, went to 6.42.12 long..... ok. Retries to stable or beta nothing...... still stuck on long term.


u can get the support file from here.

https://mega.nz/#!JnZ1iIZL!MT9wQ2vhAXA4 ... _xZnMMqljo
You should not use Extra package bundle on devices with 16MiB disk space.
I have only a backup file inserted and nothing more in files and the long term package intalled....... so what do u suggest?
You do not have the required permissions to view the files attached to this post.
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5886
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 3:24 pm

You have so many extra packages installed which are not part of bundle. That is why there is no free space.
I would suggest to install unnecessary packages.
 
User avatar
osc86
newbie
Posts: 43
Joined: Wed Aug 09, 2017 1:15 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 3:26 pm

updated a CCR1009 from 6.43.12 to 6.44 -> Lost connectivity on all eoip (ipsec) interfaces.

Update: so it seems that this update broke ipsec completely on my device. The router locks up every time I try to access any menus under ip / ipsec.
I only have about 5 tunnels configured with very basic settings.
I'm really not impressed by this update so far, reverting back to 6.43.12 for now.
Last edited by osc86 on Tue Feb 26, 2019 5:37 pm, edited 1 time in total.
 
freemannnn
Long time Member
Long time Member
Posts: 648
Joined: Sun Oct 13, 2013 7:29 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 3:41 pm

can we have cloud backup in winbox. me not so fan of cli.
options like restore,backup,delete and information of already uploaded backup will be nice in a menu. or maybe in the top of winbox information of last backup that exist or not in mikrotik server.
Last edited by freemannnn on Tue Feb 26, 2019 3:45 pm, edited 2 times in total.
 
raffav
Member Candidate
Member Candidate
Posts: 278
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 3:43 pm

can we have cloud backup in winbox. me not so fan of cli.
I believe that will be in the future
 
User avatar
lenciso
just joined
Posts: 7
Joined: Wed Aug 03, 2016 3:46 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 3:45 pm

I updated and got crash.

RB9561
Luiz Enciso
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 444
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 3:47 pm

To everyone in this thread. Please, if you experience version related issues, send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device
 
nescafe2002
Long time Member
Long time Member
Posts: 597
Joined: Tue Aug 11, 2015 12:46 pm
Location: Netherlands

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 4:03 pm

I updated and my coffee machine started smoking.
 
DenisPDA
just joined
Posts: 21
Joined: Tue Sep 04, 2018 5:42 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 4:15 pm

updated a CCR1009 from 6.43.12 to 6.44 -> Lost connectivity on all eoip (ipsec) interfaces.
Create a rule in input chains for ipsec
 
Note
newbie
Posts: 49
Joined: Fri Jun 03, 2016 12:39 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 4:21 pm

You have so many extra packages installed which are not part of bundle. That is why there is no free space.
I would suggest to install unnecessary packages.
After unistalling some packages all done in 6.44 stable like i expected............. ty.
 
DenisPDA
just joined
Posts: 21
Joined: Tue Sep 04, 2018 5:42 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 4:30 pm

problem(
fix_space.zip
You do not have the required permissions to view the files attached to this post.
 
Note
newbie
Posts: 49
Joined: Fri Jun 03, 2016 12:39 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 5:06 pm

problem(
fix_space.zip
inside flash folder or outside and reboot? Which is the right one place to put it?

What does this package rly do?
 
DenisPDA
just joined
Posts: 21
Joined: Tue Sep 04, 2018 5:42 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 5:13 pm

problem(
fix_space.zip
inside flash folder or outside and reboot? Which is the right one place to put it?
In my cases it didn't matter.
But I think better flash folder
#!/bin/bash

if [ "$bootimage" != "1" ]; then rm -f /flash/bootimage; fi

mv /var/pdb/fix-space/image /tmp
rm -rf /var/pdb/fix-space
Last edited by DenisPDA on Tue Feb 26, 2019 5:14 pm, edited 1 time in total.
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3069
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 5:13 pm

@WirelessRudy
If you set BTEST Authenticate, you need use full command like:
/tool speed-test user=YourUsernmae password=YourPassword address=10.30.30.30
I've done that but see no difference

The 'status' shows that the test is performing the different tests (udp and tcp up- and download) but comes back with status "done". No further info.

Maybe both the units engaged in the test have to be running 6.44? (I am not ready for that. Not going to to upgrade my main routers towards this new 6.44 for at least a week or two..... 6.44 has to proof itself first....
Both the client and the router that for the test need to be upgrade I found out in the eve of this day.
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.
 
Note
newbie
Posts: 49
Joined: Fri Jun 03, 2016 12:39 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 5:16 pm

problem(
fix_space.zip
inside flash folder or outside and reboot? Which is the right one place to put it?
In my cases it didn't matter.
But I think better flash folder
#!/bin/bash

if [ "$bootimage" != "1" ]; then rm -f /flash/bootimage; fi

mv /var/pdb/fix-space/image /tmp
rm -rf /var/pdb/fix-space
I did it both ways......... will i have to watch something happens after or just install and go on? What exactly do this package? The scipt is other way to install it or is the only way?
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3069
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 5:18 pm

speedtest - added "/tool speed-test" for ping latency, jitter, loss and TCP and UDP download, upload speed measurements (CLI only)

This feature is nice indeed!

It wouldn't be me not to ask for more though :D :
- Can the time the test run either be adjusted by administrator of just set longer. In many occasions the connection rates between the client and AP have to step up before a longer lasting level is
reached. The test average is kept low due this.
A full 1 minute test would be preferred, 2 would even be better, admin adjustable would be perfect.....
- Is this going to be implemented in Winbox?
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.
 
DenisPDA
just joined
Posts: 21
Joined: Tue Sep 04, 2018 5:42 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 5:23 pm


I did it both ways......... will i have to watch something happens after or just install and go on? What exactly do this package? The scipt is other way to install it or is the only way?
Corrects a memory full error.
download/file.php?id=35767
 
Note
newbie
Posts: 49
Joined: Fri Jun 03, 2016 12:39 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 5:35 pm


I did it both ways......... will i have to watch something happens after or just install and go on? What exactly do this package? The scipt is other way to install it or is the only way?
Corrects a memory full error.
download/file.php?id=35767
Is it ok to install it in machines with no size problems like 2011 or 951g? Ty for the all info by the way
 
MDE
just joined
Posts: 3
Joined: Mon Jun 20, 2016 8:38 am

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 7:51 pm

Couldn't get supout. But there seems to be an issue with DNS lookups. Running PPPoE session with static DNS of 1.1.1.1 could not resolve domains. Reverted to 6.43.12 fixed above issue.

Sent from my VTR-L29 using Tapatalk

 
isacalmeida
just joined
Posts: 7
Joined: Wed Oct 03, 2018 2:58 pm

Re: v6.44 [stable] is released!

Tue Feb 26, 2019 8:13 pm

Hello,

This fix: ppp - fixed dynamic route creation towards VPN server when "add-default-route" is used; still not working for me, on a RB750.

Anyone can help?

Who is online

Users browsing this forum: No registered users and 9 guests