Community discussions

 
pe1chl
Forum Guru
Forum Guru
Posts: 5724
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.45.2 [stable] is released!

Fri Jul 26, 2019 2:55 pm

OpenVPN is not working anymore for us after upgrading to 6.45.1 and 6.45.2. OpenVPN clients are unable to get traffic from the OpenVPN-Net (10.10.10.x/24) to the Management Network (10.80.80.x/24). The IP Firewall in Winbox shows the following message on the rules which include the ovpn-instance:

in/out-interface matcher not possible when interface (ovpn-instance) is slave - use master instead (bridge-mgmt)

Our OpenVPN setup worked perfectly fine BEFORE upgrading to 6.45.1/6.45.2. Any ideas?
Mine also stop working after Upgrade and CPU usage was high about (25-30%). But restoring old backup(configs) fix the problem.

This is so fucked up. Every single ROS update introduces new bugs...
And new features too!! The horror.
The "bug" that is being quoted in red all the time (although it is not clear why people include it with their own unrelated bug) probably is not a bug at all anyway, just an existing incorrect configuration that now is detected and indicated, and previously it just did not work.
 
aizhihuxiao
just joined
Posts: 8
Joined: Tue Jan 15, 2013 7:59 am

Re: v6.45.2 [stable] is released!

Sat Jul 27, 2019 9:28 am

I run many services on this router, such as OSPF, OpenVPN and etc.
Downgraded to 6.44.5 yesterday, the uptime is 10h until now without any issues.
I run DHCP BGP Firewall NAT VLANs SFP+ L2TP (server and clients) UPnP SNMP Scripts Schedulers in most of them and so far not a single issue. Maybe the problem is service specific? Have you tried enabling logging to an external server to catch those logs before rebooting?
Not yet, I don't have externel log server for now.
I have three CCR -1009, only this one has crash issue.
But the most service running on this router: OPENVPN, OSPF, IPSEC, EOIP, DHCP, NAT, L2TP, UPNP, SFP, FIREWALL, DNS
 
vitaly2016
newbie
Posts: 46
Joined: Wed Jan 20, 2016 9:26 am
Location: Ukraine
Contact:

Re: v6.45.2 [stable] is released!

Sat Jul 27, 2019 11:30 am

I made mistake - I did not read "v6.45.2 [stable] is released!" topic before upgrading my hEX

I successfully upgraded ROS of remote hEX from 6.45.1 to 6.45.2
After rebooting I tried to upgrade FIRMWARE from 6.45.1 to 6.45.2.
The red line in the bottom of firmware upgrade window was as usually: "successful upgrade, please reboot"
But now I can't connect to hEX after reboot.
Winbox after trying to connect within ~20 seconds reports:
"ERROR: could not connect to..."
This is remote location without any personnel. So I should go there to see what happened.

Another my RB2011 successfully upgraded its ROS to 6.45.2 but there was strange thing when I rebooted it after
FIRMWARE upgrade:
Winbox lost connection as expected, but RB2011 did not reboot. I looked at device, it kept on working and nothing happened.
In a few minutes I connected via Winbox again, reboot router and this time process finished good, firmware is 6.45.2

It's seems like with every new Mikrotik upgrade, the process is getting closer to Discovery Channels' "I Shouldn't Be Alive" series.
Only lucky ones will be able to upgrade.

P.S. Another my Mikrotik device - hEX POE is the lucky one. It was successfully upgraded from 6.44.3 to 6.45.2 (both ROS and FIRMWARE)
 
HighTech
just joined
Posts: 1
Joined: Fri Feb 22, 2019 2:26 pm

Re: v6.45.2 [stable] is released!

Sat Jul 27, 2019 12:12 pm

Warning for all RB4011 users do not install FW6.45.2 if you are using the SFP+ port, Installing the firmware makes the SFP+ adapter not seeing by the routerOS and no traffic throu SFP, downgrade to FW6.45.1 makes it work again.

I have no problem with FW6.45.2 on CHR and CCR1036

/Carsten
 
User avatar
CZFan
Forum Guru
Forum Guru
Posts: 1364
Joined: Sun Oct 09, 2016 8:25 pm
Location: South Africa, Randburg
Contact:

Re: v6.45.2 [stable] is released!

Sat Jul 27, 2019 10:51 pm

SFP+ on 4011 broken. Please pull the update. I have had two switches go offline due to this update.

Did you do the "Wireless Reset" as mentioned in previous version (6.45.1) change log?

*) rb4011 - fixed MAC address duplication between sfp-sfpplus1 and wlan1 interfaces (wlan1 configuration reset required);
MTCNA, MTCTCE, MTCRE & MTCINE
 
kiler129
Member Candidate
Member Candidate
Posts: 226
Joined: Tue Mar 31, 2015 4:32 pm
Contact:

Re: v6.45.2 [stable] is released!

Sun Jul 28, 2019 12:09 am

SFP+ on 4011 broken. Please pull the update. I have had two switches go offline due to this update.

Did you do the "Wireless Reset" as mentioned in previous version (6.45.1) change log?

*) rb4011 - fixed MAC address duplication between sfp-sfpplus1 and wlan1 interfaces (wlan1 configuration reset required);

This has nothing to do with the MAC duplication fixed in 6.45.1 - the SFP is broken in 6.45.2 and they acknowledged that in some of the previous posts.
 
eddieb
Member Candidate
Member Candidate
Posts: 135
Joined: Thu Aug 28, 2014 10:53 am
Location: Netherlands

Re: v6.45.2 [stable] is released!

Sun Jul 28, 2019 12:34 pm

updating to 6.45.2 went smooth ... from 6.45.1 to 6.45.2 with some help from the dude ;-)
No problems so far
Running 6.45.6 (stable) on :
CCR1009-8G-1S (2x ipsec/l2tp site-to-site, ipsec/l2tp roadwarrior, dhcpd, dns), CRS125-24G-1S, RB1100, RB962UiGS-5HacT2HnT (10pc), RB931-2nD, RB951, RB750GL ,RB2011UAS-RM, CHR running dude (CHR running in VirtualBox on OSX)
 
ruwi000
just joined
Posts: 11
Joined: Fri Apr 24, 2015 5:39 pm

Re: v6.45.2 [stable] is released!

Sun Jul 28, 2019 6:33 pm

When I upgraded an LtAP mini (luckily a test machine) to 6.45.1, I lost the LTE interface! When I upgraded to 6.45.2, the LTE interface is back again.
There is nothing in the release/change notes. Anybody else experiencing the same issue?
 
Paternot
Long time Member
Long time Member
Posts: 596
Joined: Thu Jun 02, 2016 4:01 am
Location: Niterói / Brazil

Re: v6.45.2 [stable] is released!

Mon Jul 29, 2019 3:31 am

Indeed! I think that whole combined package thing should be dropped, and at some time all installations are converted to separate packages during the upgrade to a new version.
What happens when some of downloaded packages are broken during download? If you have bundle package - then you have error on bundle installation, and everything is rolled back. AFAIR, when system is already installed and some additional package is broken, it simply does not get installed, so... can't you bring your RouterOS into some "clipped" state without necessary functionality when installing separate packages?
Not really.

Step1: Download ALL necessary packages. Use RAM if needed.
Step2: Verify ALL downloaded packages.
Step3: If everything is ok, install packages.

Done. This is how Linux Distros work: they download updates, verify integrity and then install.
 
XTX
newbie
Posts: 26
Joined: Sat Jun 04, 2011 4:34 pm

Re: v6.45.2 [stable] is released!

Mon Jul 29, 2019 8:51 am

at 6.45.1, gre tunnels stopped working. Redid all 15 routers on ip tunnels. 3 weeks after the release of 6.45.2, the ip tunnels stopped working ....
Exactly the same here !

Upgraded from 6.42.7 to 6.45.2 on a CCR1036 and all the GRE tunnels stopped working.

Ok I know that the Mikrotik guys can't test everything ...but GRE ? seriously ?? c'mon guys....FIX IT !!!
 
petern
just joined
Posts: 22
Joined: Wed Dec 13, 2017 5:58 pm

Re: v6.45.2 [stable] is released!

Mon Jul 29, 2019 11:12 am

at 6.45.1, gre tunnels stopped working. Redid all 15 routers on ip tunnels. 3 weeks after the release of 6.45.2, the ip tunnels stopped working ....
Exactly the same here !

Upgraded from 6.42.7 to 6.45.2 on a CCR1036 and all the GRE tunnels stopped working.

Ok I know that the Mikrotik guys can't test everything ...but GRE ? seriously ?? c'mon guys....FIX IT !!!
Did you check your firewalls allow inbound GRE? If you check the notes there was a fix for a bug that allowed it when it shouldn't've been allowed.
 
sindy
Forum Guru
Forum Guru
Posts: 3806
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.45.2 [stable] is released!

Mon Jul 29, 2019 12:08 pm

Did you check your firewalls allow inbound GRE? If you check the notes there was a fix for a bug that allowed it when it shouldn't've been allowed.
...and while fixing that one, another one has been introduced which incorrectly labels the initial packet of a GRE connection with connection-state=invalid so you need to workaround this in your firewall if you drop "invalid" packets before all selective accept rules. This has also been discussed earlier in this topic.
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.
 
XTX
newbie
Posts: 26
Joined: Sat Jun 04, 2011 4:34 pm

Re: v6.45.2 [stable] is released!

Mon Jul 29, 2019 1:14 pm

Did you check your firewalls allow inbound GRE? If you check the notes there was a fix for a bug that allowed it when it shouldn't've been allowed.
...and while fixing that one, another one has been introduced which incorrectly labels the initial packet of a GRE connection with connection-state=invalid so you need to workaround this in your firewall if you drop "invalid" packets before all selective accept rules. This has also been discussed earlier in this topic.
Hi

Thanks guys
Yeah...the problem was that i have in the FW a drop invalid input and a drop invalid output rule in place, so after disabling those two rules it started working again.
 
gotsprings
Forum Veteran
Forum Veteran
Posts: 760
Joined: Mon May 14, 2012 9:30 pm

Re: v6.45.2 [stable] is released!

Mon Jul 29, 2019 8:29 pm

Upgraded a cAP AC to 6.45.2
Reset Configuration Like I normally do... but this site was not a CAP install.
/system reset-configuration

UNIT CAME UP AS A ROUTER.

wAP AC has always done this. This was the first time I have seen a cAP AC do this.

Had to have tech on site connect to the local SSID to get around the firewall and configure it.
"It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so."
Mark Twain
 
aqualx
just joined
Posts: 4
Joined: Sun Jun 12, 2016 12:10 am

Re: v6.45.2 [stable] is released!

Mon Jul 29, 2019 9:00 pm

From release notes 6.45.1:
*) ipsec - renamed "remote-peers" to "active-peers";
Can someone change remote-peers to active-peers in script listed on this wiki page: Securing L2TP Server for IPSec

PS: It would be great if in future such changes would apply to user scripts automatically. It is not very obvious why after upgrade to new version VPN stopped working...
 
ascentnetworks
just joined
Posts: 1
Joined: Sat Dec 01, 2018 4:08 am

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 8:23 am

You guys right shit the bed with 6.45.2 It's not even close to stable. It's total trash and bricks EVERYTHING!! Note to EVERYONE DO NOT USE THIS CRAP VERSION!! YOU WILL SCREW YOUR ROUTERS!!!
 
Kampfwurst
Frequent Visitor
Frequent Visitor
Posts: 67
Joined: Mon Mar 24, 2014 2:53 pm

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 9:51 am

After upgrading to 6.45.2 the pptp connection to the core router with 6.44.1 is not possible, It stops at link established. Downgroade to 6.44.5 and it works again.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5724
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 1:38 pm

Problems with PPTP are solved the same way as GRE issues mentioned before.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8305
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 1:51 pm

Not really.

Step1: Download ALL necessary packages. Use RAM if needed.
Step2: Verify ALL downloaded packages.
Step3: If everything is ok, install packages.

Done. This is how Linux Distros work: they download updates, verify integrity and then install.
Okay, let's then imagine "out of disk space" issue in the middle of installation of Nth package. Linux distros can work with "different" versions of packages, RouterOS can't.
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5724
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 3:27 pm

Okay, let's then imagine "out of disk space" issue in the middle of installation of Nth package. Linux distros can work with "different" versions of packages, RouterOS can't.
This should only happen when something is corrupted. Normally, Linux distributions know beforehand how much extra diskspace is required when installing or updating a package.
So RouterOS can calculate if the new install will theoretically fit, and not start the upgrade when it does not fit.
 
3xHelix
just joined
Posts: 2
Joined: Wed Jun 12, 2019 7:25 am

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 4:41 pm

You can only imagine the look on my face as an enterprise network tech when a software upgrade royally killed everything in my house... This is cause router to everything in my house is over SFP !!! ...

When can we expect a fix for the botched 6.45.2 update ? ... Thank god for partitions!


P.S. - Please renamed update to "v6.45.2 [stable if you dont use sfp]"
 
raevsk
just joined
Posts: 1
Joined: Tue Jul 30, 2019 5:40 pm

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 5:52 pm

Hello to everyone
I have a problem with this version of RouterOS
I download manually package (routeros-mmips-6.45.2) from the web site and put it to my RB750Gr3 with 6.41.5 version. After reboot it must be upgraded. But after that he did not start correctly, i can not seen him in winbox or in another way (for exaple to connect him to another router and i can not find him in "neighbors").
I repeat installation on another Mikrotik RB750Gr3 with 6.41.5 version - and i again have the same proplem. Now i have 2 dead routers.
Why i have this problem? Can you help me? What i can do with it and why this problem begin?
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8305
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 6:03 pm

This should only happen when something is corrupted. Normally, Linux distributions know beforehand how much extra diskspace is required when installing or updating a package.
So RouterOS can calculate if the new install will theoretically fit, and not start the upgrade when it does not fit.
"Theoretically" is not always what will happen IRL. Like, gitlab-ce does PostgreSQL backup on package upgrade. Are you sure it calculates backup size before doing it? Are you sure it's even possible?
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
User avatar
mac86
Member Candidate
Member Candidate
Posts: 118
Joined: Sat Nov 25, 2006 12:52 am
Location: bahia blanca - argentina
Contact:

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 7:10 pm

I want to inform that we should also downgrade CCR1072.
With 6.45.1 we have an unexpected restart every day. :(

Simply lower CCR to 6.44.5 and no more bad reboots. :D
http://www.netpro-ar.com
MTINE - MTCWE - MTCRE - MTCTCE - MTCNA
Patagonia Argentina IT Consultant

Mikrotik user from V2.7.7 - Aug/2003
 
pe1chl
Forum Guru
Forum Guru
Posts: 5724
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 7:15 pm

"Theoretically" is not always what will happen IRL. Like, gitlab-ce does PostgreSQL backup on package upgrade. Are you sure it calculates backup size before doing it? Are you sure it's even possible?
I don't think there is such an issue with RouterOS updates. Maybe there is some need of temporary space (e.g. to generate a new config from the old one) but MikroTik engineers should be well aware of it.
When I tried to update devices with limited space I have seen "not enough space" errors several times and never has it corrupted the device.
(other than already existing corruption like a couple of versions ago when the old version of a big file was not deleted and took like 12MB of diskspace)
 
TheSirStumfy
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Sun Oct 14, 2018 7:54 pm

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 7:20 pm

Funny enough this upgrade caused a loop for me, until i also upgraded the firmware, now resolved.

Also as mentioned HAp lite is on the ragged edge of space, i had a backup on it and it could not upgrade until removed.
 
ViniciusMariano
just joined
Posts: 2
Joined: Tue Jul 30, 2019 7:38 pm

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 7:42 pm

I have upgraded hAP lite RB941 and hotspot doesn't work correctly. No internet connections is shown when you select the wireless. With 6.44.3 is working but with 6.45.1 and 6.45.2 and 6.46beta give this issue.
It works only if you go to 192.168.88.1

No problem instead with RB951ui-2hnd

Any one else discovered this issue?
Estou mesmo problema . nao achei soluçao ainda
 
ViniciusMariano
just joined
Posts: 2
Joined: Tue Jul 30, 2019 7:38 pm

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 8:26 pm

I'm hotspot problem in version 6.45.2 social login does not work it does not open page
 
Paternot
Long time Member
Long time Member
Posts: 596
Joined: Thu Jun 02, 2016 4:01 am
Location: Niterói / Brazil

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 8:44 pm

Not really.

Step1: Download ALL necessary packages. Use RAM if needed.
Step2: Verify ALL downloaded packages.
Step3: If everything is ok, install packages.

Done. This is how Linux Distros work: they download updates, verify integrity and then install.
Okay, let's then imagine "out of disk space" issue in the middle of installation of Nth package. Linux distros can work with "different" versions of packages, RouterOS can't.

Download to RAM. Do the job from there, and keep a flash copy of the disk on it, or on a external storage (SD card, USB disk, pendrive...). If you run into problems, just do an automatic rollback.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5724
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.45.2 [stable] is released!

Tue Jul 30, 2019 9:25 pm

In the older and the more powerful routers you can partition the flash, and keep the previous version.
Unfortunately that is no longer possible with many recent models because they have only 16M flash (earlier 128M flash was usual).
 
jamienz
just joined
Posts: 1
Joined: Wed Jul 31, 2019 1:40 am

Re: v6.45.2 [stable] is released!

Wed Jul 31, 2019 1:43 am

IP Sec Scripting update

For those using scripting rules on IPSEC-L2TP the ip ipsec remote-peers has changed in ip ipsec active-peers

Any scripts using L2PT security on that might need to be updated.
Indeed. Mikrotik you need to update this:
https://wiki.mikrotik.com/wiki/Securing ... _for_IPSec
 
freezer
newbie
Posts: 26
Joined: Tue Mar 20, 2018 8:17 pm
Contact:

Re: v6.45.2 [stable] is released!

Wed Jul 31, 2019 3:11 pm

6.45.2 on my cAP AC is total crap. I'm loosing MGMT access few minutes after power cycling the unit. I did downgrade to 6.44.5 but it was still working as badly as before - I had to downgrade the firmware too to finally have a stable device.
-Greg
Skype: freezer_szczecin
 
posh4529
just joined
Posts: 6
Joined: Wed Sep 18, 2013 10:14 am

Re: v6.45.2 [stable] is released!

Wed Jul 31, 2019 11:20 pm

Hi everybody!

Today I had an issue after updating the RouterOS on my 2 Mikrotik routers from ver.6.45.1 to ver.6.45.2. My RB4011 lost it's ability to obtain the ip-address from ISP via DHCP. I do strongly advise you not to update to RoterOS version 6.45.2 as it's stable but faulty. For details: SL4529@GMAIL.COM.
 
Paternot
Long time Member
Long time Member
Posts: 596
Joined: Thu Jun 02, 2016 4:01 am
Location: Niterói / Brazil

Re: v6.45.2 [stable] is released!

Wed Jul 31, 2019 11:36 pm

We are reaching the point where 6.45.2 should be considered "unfit for purpose". Even the vulnerabilities it mitigates seem "less worse" than the problems it caused.

Waiting 6.45.3 (6.46?).
 
DummyPLUG
Frequent Visitor
Frequent Visitor
Posts: 78
Joined: Wed Jan 03, 2018 10:17 am

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 4:22 pm

What's new in 6.45.3 (2019-Jul-29 12:11):

Important note!!!
Due to removal of compatibility with old version passwords in this version, downgrading to any version prior to v6.43 (v6.42.12 and older) will clear all user passwords and allow password-less authentication. Please secure your router after downgrading.
Old API authentication method will also no longer work, see documentation for new login procedure:
https://wiki.mikrotik.com/wiki/Manual:API#Initial_login

*) certificate - renew certificates via SCEP when 3/4 of lifetime reached;
*) crs317 - fixed multicast packet receiving (introduced in v6.45);
*) hotspot - fixed default profile values not being used (introduced in v6.45);
*) rb4011 - fixed SFP+ interface linking (introduced in v6.45.2);
*) smips - reduced RouterOS main package size (disabled LTE modem, dot1x and SwOS support);
*) supout - fixed SIM slot printing (introduced in v6.45);
*) wireless - improved U-APSD (WMM Power Save) support for 802.11e;
 
User avatar
CrimzinZA
just joined
Posts: 5
Joined: Thu Aug 01, 2019 3:25 pm
Location: Cape Town

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 4:27 pm

I recently purchased 4 LtAP mini's I have upgraded each one to 6.45.2 ( original factory type was 6.42.1 )

The LTE connection is VERY unreliable.

I am using Vodacom sim both contract and Pay as you go.

I had to remove both sims pin as the software can't handle it.

It has internet for a few minutes then just stops. although it states registered and up. you can’t ping 8.8.8.8.

You have to restart the router. plus it sometimes connects and sometimes not. then you restart then it works.

I have tried setting it to LTE only.

I have tried putting roaming on and off.

still stops working.

These units soul goal is to have something in the field connected to the internet. but it is not working.

One guy mentioned the LTE interface disappearing. try rebooting the unit 4 times. then it comes back.

Also after upgrading you have to reset the whole unit just to get stuff to work again.

I have tried it in different locations. 2 different units and with external and internal antennas.
 
Kindis
Member Candidate
Member Candidate
Posts: 246
Joined: Tue Nov 01, 2011 6:54 pm

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 5:17 pm

What version of ROS are you running? Also have you updated the modem firmware. I had big issues getting 4G to run on my unit until I upgraded modem firmware.
 
Amm0
Frequent Visitor
Frequent Visitor
Posts: 66
Joined: Sun May 01, 2016 7:12 pm
Location: California
Contact:

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 5:20 pm

@CrimzinZA As noted above, make sure the firmware matches (in Winbox, System > Routerboard > Upgrade, then reboot the box). If that doesn't help, you might want to try downgrading to the "long term" release...under System > Packages, you can select the older package. Don't know if it will help, but something to try.
 
HZsolt
just joined
Posts: 24
Joined: Tue Apr 24, 2018 7:31 pm

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 7:35 pm

/system package update check-for-updates
channel: stable
installed-version: 6.45.2
latest-version: 6.45.2
status: System is already up to date

The 6.45.3 is not available yet!
 
Kindis
Member Candidate
Member Candidate
Posts: 246
Joined: Tue Nov 01, 2011 6:54 pm

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 8:43 pm

@CrimzinZA You have 3 things to check 😁
ROS version, MT firmware and modem firmware.
Upgrading modem firmware solved my 4G issues.

Here is how to update modem firmware https://wiki.mikrotik.com/wiki/Manual:I ... re_upgrade
 
Kindis
Member Candidate
Member Candidate
Posts: 246
Joined: Tue Nov 01, 2011 6:54 pm

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 8:45 pm

/system package update check-for-updates
channel: stable
installed-version: 6.45.2
latest-version: 6.45.2
status: System is already up to date

The 6.45.3 is not available yet!
You can download via the download page.
https://mikrotik.com/download
 
HZsolt
just joined
Posts: 24
Joined: Tue Apr 24, 2018 7:31 pm

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 9:02 pm

/system package update check-for-updates
channel: stable
installed-version: 6.45.2
latest-version: 6.45.2
status: System is already up to date

The 6.45.3 is not available yet!
You can download via the download page.
https://mikrotik.com/download
I know it, but I would like download via the command line.
 
sindy
Forum Guru
Forum Guru
Posts: 3806
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 9:38 pm

I know it, but I would like download via the command line.
No problem:
/tool fetch url=("https://download.mikrotik.com/routeros/6.45.3/routeros-".[/system resource get architecture-name]."-6.45.3.npk")
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.
 
HZsolt
just joined
Posts: 24
Joined: Tue Apr 24, 2018 7:31 pm

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 9:44 pm

I know it, but I would like download via the command line.
No problem:
/tool fetch url=("https://download.mikrotik.com/routeros/6.45.3/routeros-".[/system resource get architecture-name]."-6.45.3.npk")
Thank You!!! You are GENIUS!!!!
 
User avatar
eworm
Member
Member
Posts: 378
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.45.2 [stable] is released!

Thu Aug 01, 2019 9:56 pm

@CrimzinZA You have 3 things to check 😁
ROS version, MT firmware and modem firmware.
Upgrading modem firmware solved my 4G issues.

Here is how to update modem firmware https://wiki.mikrotik.com/wiki/Manual:I ... re_upgrade
Or you use my script, just copy and paste to your terminal:
unattended-lte-firmware-upgrade

Even works for devices in remote location.
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
xtrans
just joined
Posts: 8
Joined: Fri Feb 15, 2019 3:44 pm

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 7:09 am

from v6.45.1 to v6.45.2 still not automatically showing captive portal on hotspot in http. only v6.44.3 below work perfectly
update.. even v6.45.3 not automatically show captive portal.
 
User avatar
CrimzinZA
just joined
Posts: 5
Joined: Thu Aug 01, 2019 3:25 pm
Location: Cape Town

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 9:16 am

@CrimzinZA As noted above, make sure the firmware matches (in Winbox, System > Routerboard > Upgrade, then reboot the box). If that doesn't help, you might want to try downgrading to the "long term" release...under System > Packages, you can select the older package. Don't know if it will help, but something to try.
Thank you for the feedback.

I made sure it was done. routerboard and firmware is the same.

If I downgrade what would be the safest reliable version?

Best Regards.
 
User avatar
CrimzinZA
just joined
Posts: 5
Joined: Thu Aug 01, 2019 3:25 pm
Location: Cape Town

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 9:21 am

When I upgraded an LtAP mini (luckily a test machine) to 6.45.1, I lost the LTE interface! When I upgraded to 6.45.2, the LTE interface is back again.
There is nothing in the release/change notes. Anybody else experiencing the same issue?
I had this randomly happen. After restarting a few times it sees it again. one issue is that I can see the LTE and the traffic but the unit itself cant connect to the internet although it states its registered and connected. When connected and there is internet it only last for a short while. ( from a few minutes to a day )
 
User avatar
CrimzinZA
just joined
Posts: 5
Joined: Thu Aug 01, 2019 3:25 pm
Location: Cape Town

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 9:35 am

I have picked up a new problem on LtAP mini.

if you remove GSM and 3G an leave LTE it states under Interface >> LTE1 >> Status >> Registration status >> unknown or denied.

If you dd 3G back it registers
 
LeftyTs
Frequent Visitor
Frequent Visitor
Posts: 71
Joined: Thu Nov 03, 2016 2:39 am
Location: Athens, Greece
Contact:

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 10:33 am

I know it, but I would like download via the command line.
No problem:
/tool fetch url=("https://download.mikrotik.com/routeros/6.45.3/routeros-".[/system resource get architecture-name]."-6.45.3.npk")
This will work if you have the main package installed but if you have packages (like devices with limited flash space for example) then this is a big problem and you have to get the full package and then extract and install the packages. This is OK and not such a big issue if you have one or maybe a few mikrotik devices to manage but it is a big problem if you mange a lot of them and each one may be different than the other in architecture as well as packages installed, so please Mikrotik, can you fix this problem?
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 1296
Joined: Sat Dec 24, 2016 11:17 am
Location: jo.overland at gmail.com

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 12:20 pm

One day since 6.45.3 released on download, nothing here on the forum.
Can't remember seeing this behavior before.
 
How to use Splunk to monitor your MikroTik Router

MikroTik->Splunk
 
 
sindy
Forum Guru
Forum Guru
Posts: 3806
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 12:50 pm

One day since 6.45.3 released on download, nothing here on the forum.
Can't remember seeing this behavior before.
@emils has explained that in the 6.45.3 topic you've spawned yourself - problems with the release system.
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.
 
bda
Member Candidate
Member Candidate
Posts: 126
Joined: Fri Sep 03, 2010 11:07 am
Location: Russia,Moscow

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 1:31 pm

Hi,
6.45.3 has no GRE miss-marking fix. Very Bad...
God bless UNIX!
 
sindy
Forum Guru
Forum Guru
Posts: 3806
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 2:10 pm

6.45.3 has no GRE miss-marking fix. Very Bad...
I agree it is bad, but on the other hand what is so complicated about adding protocol=!gre to the action=drop connection-state=invalid rule?
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.
 
rzirzi
Member
Member
Posts: 377
Joined: Mon Oct 09, 2006 2:33 pm

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 2:58 pm

But... why it isn't any official info about ROS 6.45.3 ?
 
sindy
Forum Guru
Forum Guru
Posts: 3806
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 3:07 pm

See post #202 above.
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.
 
User avatar
karlisi
Member Candidate
Member Candidate
Posts: 247
Joined: Mon May 31, 2004 8:09 am
Location: Latvia

Re: v6.45.2 [stable] is released!

Fri Aug 02, 2019 3:28 pm

my RB750Gr3 with 6.41.5 version. After reboot it must be upgraded. But after that he did not start correctly, i can not seen him in winbox
Check Winbox version, it must be at least 3.19
---
Karlis

Who is online

Users browsing this forum: No registered users and 4 guests