Community discussions

MikroTik App
 
User avatar
emils
Forum Veteran
Forum Veteran
Topic Author
Posts: 906
Joined: Thu Dec 11, 2014 8:53 am

v6.45.6 [stable] is released!

Wed Sep 11, 2019 1:27 pm

RouterOS version 6.45.6 has been released in public "stable" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 6.45.6 (2019-Sep-10 09:06):

Important note!!!
Due to removal of compatibility with old version passwords in this version, downgrading to any version prior to v6.43 (v6.42.12 and older) will clear all user passwords and allow password-less authentication. Please secure your router after downgrading.
Old API authentication method will also no longer work, see documentation for new login procedure:
https://wiki.mikrotik.com/wiki/Manual:API#Initial_login


Changes in this release:

*) capsman - fixed regulatory domain information checking when doing background scan;
*) conntrack - improved system stability when using h323 helper (introduced in v6.45);
*) crs3xx - fixed "egress-rate" property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
*) qsfp - clear SFP monitoring data on port enable;
*) qsfp - correctly display SFP monitoring data;
*) qsfp - fixed EEPROM checksum validation;
*) qsfp - show more QSFP module diagnostics;
*) wireless - include last frequency when manually setting frequency step in "scan-list";

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device

Please keep this forum topic strictly related to this particular RouterOS release.
 
MetUys
newbie
Posts: 31
Joined: Mon Mar 17, 2014 1:19 pm

Re: v6.45.6 [stable] is released!

Wed Sep 11, 2019 3:45 pm

Upgraded hAP ac2, no issues as yet. (although config is very simple, pppoe client and pptp vpn).

I also want to test l2tp/ipsec but had issues in previous build(s) but seemed to be more ISP related than mikrotik (yes Im aware of the gre traffic acceptance needs).

I will also try see if the "very first GRE packet of a new tunnel is improperly labelled with connection-state=invalid". I know there was much about this in a previous topic and I did read it all ~ this comes as a side effect of the initial gre fix, and that enabling the PPTP helper may play a part in the state.
 
ofer
Frequent Visitor
Frequent Visitor
Posts: 59
Joined: Wed May 23, 2018 11:45 am

Re: v6.45.6 [stable] is released!

Thu Sep 12, 2019 9:38 am

Upgraded 3xHAP AC from 6.45.5 => 6.45.6
I had a small issue with IP firewall rules that stopped working due to bridge configuration changes but it was a minor issue that was easy to resolve

Upgraded 3xHAP AClite from 6.45.5 => 6.45.6
No issues although only one of the upgrade was done manually the two other were upgraded by CAPS, anyone know to also upgrade the firmware with CAPS?

Thanks!
Last edited by ofer on Mon Sep 16, 2019 11:05 am, edited 1 time in total.
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 3279
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: v6.45.6 [stable] is released!

Thu Sep 12, 2019 9:52 am

due to bridge configuration changes
Can you post what did change?
 
ofer
Frequent Visitor
Frequent Visitor
Posts: 59
Joined: Wed May 23, 2018 11:45 am

Re: v6.45.6 [stable] is released!

Thu Sep 12, 2019 10:25 am

due to bridge configuration changes
Can you post what did change?
It was a masquerade rule that was configured to allow access to the next router, the rule was disabled and showed an error I modified the output device from a specific ether within the bridge to the parent bridge itself.
 
User avatar
Hotz1
Member
Member
Posts: 393
Joined: Tue Oct 09, 2007 6:55 am

Re: v6.45.6 [stable] is released!

Thu Sep 12, 2019 5:53 pm

Since the release of 6.45.1, neighbor discovery on our networks doesn't show IP addresses; only MAC addresses and other information.

I suspect it's because we carry our admin traffic on a VLAN, and the default VLAN is unused. My suspicion is, thanks to:
*) discovery - correctly create neighbors from VLAN tagged discovery messages;
introduced in 6.45.1, we are "correctly" seeing the neighbor information for the default VLAN (with no IP addresses), instead of the IP information from our management VLAN.

I discovered this (pun intended) while downgrading to 6.44.5 for suspected OSPF issues. Very inconvenient when I don't have all of our IP addresses committed to memory...
Last edited by Hotz1 on Fri Sep 20, 2019 5:23 am, edited 1 time in total.
 
User avatar
nichky
Forum Guru
Forum Guru
Posts: 1275
Joined: Tue Jun 23, 2015 2:35 pm

Re: v6.45.6 [stable] is released!

Thu Sep 12, 2019 11:59 pm

*) wireless - include last frequency when manually setting frequency step in "scan-list";

what exactly will do for us?
 
dhoulbrooke
Trainer
Trainer
Posts: 65
Joined: Sun Apr 19, 2015 7:24 am
Location: Whakatāne, New Zealand

Re: v6.45.6 [stable] is released!

Fri Sep 13, 2019 3:09 am

*) wireless - include last frequency when manually setting frequency step in "scan-list";

what exactly will do for us?


I think previously if you used a scan list like: 2412-2472:20 it would never select the 2472 frequency.
 
TimurA
Member Candidate
Member Candidate
Posts: 199
Joined: Sat Dec 15, 2018 6:13 am
Location: Tashkent
Contact:

Re: v6.45.6 [stable] is released!

Fri Sep 13, 2019 7:13 am

RB4011 now correct base mac address in CAPSMAN - thanks a lot Reinis!
You do not have the required permissions to view the files attached to this post.
 
eddieb
Member
Member
Posts: 305
Joined: Thu Aug 28, 2014 10:53 am
Location: Netherlands

Re: v6.45.6 [stable] is released!

Fri Sep 13, 2019 9:56 am

updating to 6.45.6 went smooth ... from 6.45.5 to 6.45.6 done thru the dude ;-)
No problems so far
 
mszru
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Wed Aug 10, 2016 10:42 am

Re: v6.45.6 [stable] is released!

Fri Sep 13, 2019 10:12 pm

Dear MikroTik team,
Please try to make 6.45.x bundles smaller for smips devices (hAP lite, hAP mini) without sacrificing the functionality. Upgrade from 6.45.5 to 6.45.6 failed on one of my hAP lite due to insufficient free space (20 KiB free out of 16 MiB). And yes, I had no other files, just the .npk, and rebooted the router before the upgrade.

I could not switch to long-term channel 6.44.5 - the same space problem (48 KiB free out of 16 MiB).

Downgrade to 6.43.7 went fine.

Here is the list of npk for mentioned versions with their file size:
routeros-smips-6.43.7.npk    7434 KB
routeros-smips-6.44.5.npk    7522 KB
routeros-smips-6.45.5.npk    7510 KB
routeros-smips-6.45.6.npk    7550 KB
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 3279
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: v6.45.6 [stable] is released!

Sat Sep 14, 2019 10:09 am

Downgrade to 6.43.7 went fine.
Now you can try to upgrade to 6.45.6. Since 6.43.7 takes less space compare to your previous version was larger, 6.45.6 may now fit.
 
Ne0Flax
just joined
Posts: 1
Joined: Thu Sep 12, 2019 3:59 pm
Location: Uzbekistan

Re: v6.45.6 [stable] is released!

Sat Sep 14, 2019 11:42 am

Dear MikroTik team,
Please try to make 6.45.x bundles smaller for smips devices (hAP lite, hAP mini) without sacrificing the functionality. Upgrade from 6.45.5 to 6.45.6 failed on one of my hAP lite due to insufficient free space (20 KiB free out of 16 MiB). And yes, I had no other files, just the .npk, and rebooted the router before the upgrade.

I could not switch to long-term channel 6.44.5 - the same space problem (48 KiB free out of 16 MiB).

Downgrade to 6.43.7 went fine.

Here is the list of npk for mentioned versions with their file size:
routeros-smips-6.43.7.npk    7434 KB
routeros-smips-6.44.5.npk    7522 KB
routeros-smips-6.45.5.npk    7510 KB
routeros-smips-6.45.6.npk    7550 KB
Same problem. I have a nAP ac. I can’t even update using the netinstall utility from 6.45.5 to 6.45.6.
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 3279
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: v6.45.6 [stable] is released!

Sat Sep 14, 2019 11:51 am

Did you try as I write above? Downgrade to a smaller version before upgrade? example 6.43.7
 
mszru
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Wed Aug 10, 2016 10:42 am

Re: v6.45.6 [stable] is released!

Sat Sep 14, 2019 2:10 pm

Downgrade to 6.43.7 went fine.
Now you can try to upgrade to 6.45.6. Since 6.43.7 takes less space compare to your previous version was larger, 6.45.6 may now fit.
That worked well, thanks. So the upgrade path for this hAP lite was:
6.43.7 -> 6.45.5 - OK
6.45.5 -> 6.45.6 - Failed
6.45.5 -> 6.43.7 - OK (downgrade)
6.43.7 -> 6.45.6 - OK
Doing the upgrade to the subsequent version via the downgrade first does not look like a straightforward way. And that seems to be the only way for this device, unless npk becomes smaller in size.
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 3279
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: v6.45.6 [stable] is released!

Sat Sep 14, 2019 2:18 pm

Doing the upgrade to the subsequent version via the downgrade first does not look like a straightforward way. And that seems to be the only way for this device, unless npk becomes smaller in size.
It will become better since 6.46 is smaller than 6.45. It was just some version of 6.45 that was on the limit of what was possible to add and to do upgrade from.
 
User avatar
chris6671980309
just joined
Posts: 22
Joined: Wed Feb 23, 2011 7:06 am
Location: Singapore

Re: v6.45.6 [stable] is released!

Sat Sep 14, 2019 3:36 pm

There is no statistic in all CAP interface on CCR1009-8G-1S-1S+.
You do not have the required permissions to view the files attached to this post.
 
meazz1
Frequent Visitor
Frequent Visitor
Posts: 67
Joined: Tue Nov 28, 2017 9:44 pm
Location: Auburn, GA

Re: v6.45.6 [stable] is released!

Sat Sep 14, 2019 5:45 pm

Upgraded from v6.45.5 to v6.45.6 on my hex mmips and no problem but setup is very simple and straight forward.
 
ofer
Frequent Visitor
Frequent Visitor
Posts: 59
Joined: Wed May 23, 2018 11:45 am

Re: v6.45.6 [stable] is released!

Mon Sep 16, 2019 11:03 am

Since the release of 6.45.1, neighbor discovery on our networks don't show IP addresses; only MAC addresses and other information.

I suspect it's because we carry our admin traffic on a VLAN, and the default VLAN is unused. My suspicion is, thanks to:
*) discovery - correctly create neighbors from VLAN tagged discovery messages;
introduced in 6.45.1, we are "correctly" seeing the neighbor information for the default VLAN (with no IP addresses), instead of the IP information from our management VLAN.

I discovered this (pun intended) while downgrading to 6.44.5 for suspected OSPF issues. Very inconvenient when I don't have all of our IP addresses committed to memory...
You can route the vlan to a bridge and set neighbor discovery onto that bridge that way you'll still have neighbor discovery enabled.
 
S4bulba
just joined
Posts: 13
Joined: Mon May 07, 2018 12:18 am

Re: v6.45.6 [stable] is released!

Mon Sep 16, 2019 4:22 pm

951Ui-2nD user here.
Installed it over 6.45.5, , which looked better stability wise, on the pppoe wan side.Installation itself went ok.
I have reverted to 6.44.5 due to a strange logged issue, though.
In my firewall the Output Chain ends with a drop and Log rule.
After restarting the router today i have had a strange ICMP Type 3 Code 4 drop logged between 192.168.88.1->192.168.88.1.
Why did it pinged itself ?
I have not observed this with older builds...
Is it normal ?
 
Didzito
just joined
Posts: 6
Joined: Mon Sep 02, 2019 11:09 am

Re: v6.45.6 [stable] is released!

Mon Sep 16, 2019 5:12 pm

There is no statistic in all CAP interface on CCR1009-8G-1S-1S+.
Same for me.
But BGP drop is fixed in this release. It looks like :)
 
Didzito
just joined
Posts: 6
Joined: Mon Sep 02, 2019 11:09 am

Re: v6.45.6 [stable] is released!

Tue Sep 17, 2019 3:25 pm

Nop BGP hung up continues, with longer working time, but happens. And caps acts strange, cannot find manager, and comes back only after restart. Best stable at this moment 6.45.3. Of course little bit annoying all the time reverting :D
 
ixi
just joined
Posts: 1
Joined: Wed Sep 18, 2019 10:04 am

Re: v6.45.6 [stable] is released!

Wed Sep 18, 2019 10:18 am

Hi,

Will rise again this case... which stopped working after 6.44.3 version. And your software upgrade to 6.45.2 didn't fix this... Maybe someone knows how to fix this or avoid it?


6.45.1
*) ospf - added support for link scope opaque LSAs (Type 9) for OSPFv2;
*) ospf - fixed opaque LSA type checking in OSPFv2;
*) ospf - improved "unknown" LSA handling in

6.45.2
*) ospf - fixed possible busy loop condition when accessing OSPF LSAs;OSPFv3;

Quoted from member -> rekeds

Code: Select all
11:36:27 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:36:37 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:37:07 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:37:18 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:37:47 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:37:58 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:38:27 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:38:39 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:39:08 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:39:20 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:39:48 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:40:01 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:40:28 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:40:42 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:41:08 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:41:22 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:41:48 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:42:02 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:42:28 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:42:43 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:43:08 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:43:23 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:43:48 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:44:04 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:44:28 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:44:45 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:45:08 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:45:26 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:45:48 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:46:07 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:46:29 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:46:48 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:47:09 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way
11:47:29 route,ospf,info OSPFv2 neighbor 10.9.0.1: state change from Loading to 2-Way

downgrade 6.44, ospf works :[

about 20 routers, half was updated, all updated did this. downgrade fixes ;[

ospf with backbone and 23 nssa areas.
two links from bbone to nssa. 🤷‍♂️
vrf.

edit.
added a nokia to the mix:

"LCL_RTR_ID 10.9.0.1: Neighbor 0.0.0.6 on TEST-NBR router state changed to exchangeStart (event SEQ_MISM)" :D
 
holmesm
just joined
Posts: 21
Joined: Wed Oct 21, 2015 5:44 am

Re: v6.45.6 [stable] is released!

Fri Sep 20, 2019 4:59 am

Update when smooth, but NAT rules no longer work.
 
Kindis
Member
Member
Posts: 434
Joined: Tue Nov 01, 2011 6:54 pm
Location: Sweden

Re: v6.45.6 [stable] is released!

Fri Sep 20, 2019 8:40 am

Update when smooth, but NAT rules no longer work.
Is that not like saying "The surgery went well but he died"? :-)
At least for me no NAT rules would mean the update did not go well.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 2855
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.45.6 [stable] is released!

Fri Sep 20, 2019 11:58 am

It's more like coma after surgery as router is still alive :-)
 
ditonet
Forum Veteran
Forum Veteran
Posts: 835
Joined: Mon Oct 19, 2009 12:52 am
Location: Europe/Poland/Konstancin-Jeziorna
Contact:

Re: v6.45.6 [stable] is released!

Fri Sep 20, 2019 1:12 pm

The time has come for a new certificate, "MikroTik Certified Surgeon" :D
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 2855
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.45.6 [stable] is released!

Fri Sep 20, 2019 6:06 pm

MikroTik
Certified
Network
Anesthesiologist

will bring your router back to life :lol: :lol: :lol: :lol:
 
ozone
newbie
Posts: 26
Joined: Wed Jul 18, 2018 1:23 am

Re: v6.45.6 [stable] is released!

Sun Sep 22, 2019 2:44 am

With these ever increasing updates (in size) and ever deceasing flash sizes (64->32->16MB), I feel myself more often as I would wish:

MikroTik
Certified
Network
Pathologist

... when my router does not boot any more after update

:)
 
Bright23
just joined
Posts: 1
Joined: Sun Sep 22, 2019 2:43 am

Re: v6.45.6 [stable] is released!

Sun Sep 22, 2019 4:17 am

Has anyone seen any issues with their Queue Trees?

I have a 1072 that I do both Packet Prioritization via Prerouting Mangle and Rate Limits via Forward Mangle.

If I enable one of the Global Queues in the Queue Tree that I use for Prioritization that exceeds an Avg Rate of 1.2 gbps all the CPU’s spike to 100%, the Queue starts dropping packets, and all the normal bad things happen when you run at 100%. Once I disable the Packet Marking for that particular traffic, the CPU’s drop back to normal and run at their normal average. The rules and queue setup that I’m using is a couple years old and the traffic patterns have been similar for 6+ months. This seems to be an issue introduced in 6.45.6.
 
kentaur
just joined
Posts: 3
Joined: Thu Dec 03, 2015 5:16 pm

Re: v6.45.6 [stable] is released!

Sun Sep 22, 2019 9:10 pm

I have trouble with kid control, it doesn't add firewall rules anymore.
Tested on two hAP ac lites.
 
zuhel
just joined
Posts: 1
Joined: Tue May 07, 2019 11:49 am

Re: v6.45.6 [stable] is released!

Thu Sep 26, 2019 6:13 am

Uptime 12 days x86. No problems.
 
eolomaps
just joined
Posts: 4
Joined: Sun Mar 19, 2017 5:38 pm

Re: v6.45.6 [stable] is released!

Wed Oct 02, 2019 10:57 pm

KID control NOT WORKING after update to 6.45.6.
firewall filter rules not installed

My router is RB2011UiaS
 
magnarph
just joined
Posts: 1
Joined: Thu Oct 03, 2019 4:45 am

Re: v6.45.6 [stable] is released!

Thu Oct 03, 2019 4:58 am

Hi Guys!

I need help, I got an RB4011, it's currently running on 6.44.1, I have tried installing the latest version on it 6.45.6 but it's not working. I tried hitting the "Download" which usually end's up with "reboot to upgrade" but the RB4011 reboots automatically. I tried "Download and Install" after the download, it reboots but it stays on the same 6.44.1 firmware. What am I doing wrong?

Thanks in Advance!
Manny
 
WeWiNet
Long time Member
Long time Member
Posts: 591
Joined: Thu Sep 27, 2018 4:11 pm

Re: v6.45.6 [stable] is released!

Thu Oct 03, 2019 11:29 am

KID control NOT WORKING after update to 6.45.6.
firewall filter rules not installed

My router is RB2011UiaS
I setup yesterday Kid Control on 6.45.6 on RB4011 and it was working well (IP Firewall rules went on and off according to setup),
also used TIKApp for pause/resume.

Maybe your setup from pre-6.45.6 does not migrate correctly to 6.45.6?
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.45.6 [stable] is released!

Thu Oct 03, 2019 4:22 pm

What am I doing wrong?
First, check the Log after reboot.
 
eolomaps
just joined
Posts: 4
Joined: Sun Mar 19, 2017 5:38 pm

Re: v6.45.6 [stable] is released!

Sat Oct 05, 2019 4:53 pm

KID control NOT WORKING after update to 6.45.6.
firewall filter rules not installed

My router is RB2011UiaS
I setup yesterday Kid Control on 6.45.6 on RB4011 and it was working well (IP Firewall rules went on and off according to setup),
also used TIKApp for pause/resume.

Maybe your setup from pre-6.45.6 does not migrate correctly to 6.45.6?
Thankyou very much, was my fault, error in user name.
Kid control works now flawlessy in 6.45.6 on RB2011.
Regards
 
kentaur
just joined
Posts: 3
Joined: Thu Dec 03, 2015 5:16 pm

Re: v6.45.6 [stable] is released!

Mon Oct 07, 2019 10:29 pm

Maybe your setup from pre-6.45.6 does not migrate correctly to 6.45.6?

I used system/reset-configuration and tryed again with export compact / import configuration - doesn't work.
I used system/reset-configuration and manually configured settings - doesn't work.
Then used the reset button and manually configured settings - nope still doesn't work.
 
lintingfung
just joined
Posts: 1
Joined: Wed Jan 30, 2019 3:38 pm

Re: v6.45.6 [stable] is released!

Tue Oct 08, 2019 4:02 am

I happy to tell cAP AC users.

Before the upgrade (I used 6.43.2), even connect 20 iPad at 5G.
They cannot pass the upload and download test simultaneously. They will disconnect when the test started.

After I upgrade to 6.45.6, I discover that the performance issue of cAP AC have been solved.
Now I can connect over 80 iPad to the cAP AC (5G) with no problem ! I haven't tested the highest limit.
And the performance is not bad, that is about 200Mbps with 40 iPad client simultaneously at 5G.
And even the signal at -80 or worst. The connection is so stable.

Can you tell me what the 6.45.2 do ?
*) wireless - improved 802.11ac stability for all ARM devices with wireless;
 
CsXen
Frequent Visitor
Frequent Visitor
Posts: 94
Joined: Wed Sep 10, 2014 8:31 pm
Location: Budapest - Hungary

Re: v6.45.6 [stable] is released!

Wed Oct 09, 2019 11:02 am

Hi.
Updated my RB2011. After upgrade, I must adjust scripts.
In 6.40.9, the command:
:local localIP [:pick [/interface pppoe-client monitor PPPoE-Digi as-value] 6;];
worked well.
In 6.45.6, it waits forever.

The correct line is:
:local localIP [:pick [/interface pppoe-client monitor PPPoE-Digi once as-value] 6;];
works again.

Best regards: CsXen
 
User avatar
eworm
Forum Guru
Forum Guru
Posts: 1070
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.45.6 [stable] is released!

Wed Oct 09, 2019 9:45 pm

The correct line is:
:local localIP [:pick [/interface pppoe-client monitor PPPoE-Digi once as-value] 6;];
works again.
This makes it even more future-proof:
:local localIP ([/interface pppoe-client monitor PPPoE-Digi once as-value]->"local-address");
 
axel13
just joined
Posts: 2
Joined: Wed Oct 09, 2019 11:36 pm

Re: v6.45.6 [stable] is released!

Fri Oct 11, 2019 12:01 pm

Hello.
D402 LTE modem is not detected in interfaces (HAP ac), but router detects a folder in Files.
 
xtrans
just joined
Posts: 9
Joined: Fri Feb 15, 2019 3:44 pm

Re: v6.45.6 [stable] is released!

Sun Oct 13, 2019 1:26 pm

this version hotspot redirect is not working in hap lite RB941,
but working in RB951.
 
zakynthoswifi
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jul 17, 2014 12:38 am
Location: Zakynthos
Contact:

Re: v6.45.6 [stable] is released!

Mon Oct 14, 2019 9:05 pm

Router: CCR1009
Problems:

PPPoE server running on router, after 7 days uptime start's to loose clients (disconnection messages and full breakdown)
OSPF from full to down and after 5 minutes it come's back to full.
SNMP over Librenms Sensor under limit for FAN rpm's (it goes to 0 from7500 rpm)
I saw some wierd log errors (script error contact support, system failure, please send supout file to mikrotik support.)
 
andriys
Forum Guru
Forum Guru
Posts: 1526
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.45.6 [stable] is released!

Mon Oct 14, 2019 11:46 pm

contact support, system failure, please send supout file to mikrotik support.
Have you done that already?
 
User avatar
osc86
Member Candidate
Member Candidate
Posts: 197
Joined: Wed Aug 09, 2017 1:15 pm

Re: v6.45.6 [stable] is released!

Tue Oct 15, 2019 12:34 am

DUDE Server looses connection to some Agents running 6.45.6 like every 2-10 minutes, but reconnects succesfully after one or two seconds.
I don't think it's a network issue, there is a packet loss of 0.1% out of 1000 packets sent.
 
zakynthoswifi
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jul 17, 2014 12:38 am
Location: Zakynthos
Contact:

Re: v6.45.6 [stable] is released!

Tue Oct 15, 2019 12:41 am

contact support, system failure, please send supout file to mikrotik support.
Have you done that already?
Yes I’ve done it already
 
Slamar
just joined
Posts: 1
Joined: Thu Oct 17, 2019 10:34 pm

Re: v6.45.6 [stable] is released!

Thu Oct 17, 2019 11:13 pm

After upgrade from 6.45.3 to 6.45.6, my vpn doesn't work correctly. Before my iPhone connect to my vpn without problems and work really good, now i get a notification "user authentication failed" in MT logs


log content
22:10:41 ipsec,info new ike2 SA (R): 192.168.100.6[500]-94.254.xxx.xxx[55669] spi:836b5e5dbcfcb0ee:407ceb47da6f8661 
22:10:41 ipsec,info,account peer authorized: 192.168.100.6[4500]-94.254.xxx.xxx[22112] spi:836b5e5dbcfcb0ee:407ceb47da6f8661 
22:10:41 ipsec,info acquired 192.168.13.253 address for 94.254.xxx.xxx, iPhone.client 
 
cypa
newbie
Posts: 25
Joined: Mon Apr 01, 2013 11:20 am

SOLVED Re: v6.45.6 [stable] is released!

Mon Oct 21, 2019 12:48 pm

SOLVED - it was my fault (/ppp l2tp-secret was added mistakenly)


after upgrade windows clients lost ability to connect to any VPN (pptp and l2tp)
RB2011 says LCP ConfRej anyway, any settings I do it looks the same, look below

...
Oct 21 14:43:16 mikrotik.m66.officeburg.ru pptp,ppp,debug,packet m66: <17>: rcvd LCP ConfReq id=0x6
Oct 21 14:43:16 mikrotik.m66.officeburg.ru pptp,ppp,debug,packet m66: <mru 1400>
Oct 21 14:43:16 mikrotik.m66.officeburg.ru pptp,ppp,debug,packet m66: <magic 0x425c5319>
Oct 21 14:43:16 mikrotik.m66.officeburg.ru pptp,ppp,debug,packet m66: <pcomp>
Oct 21 14:43:16 mikrotik.m66.officeburg.ru pptp,ppp,debug,packet m66: <accomp>
Oct 21 14:43:16 mikrotik.m66.officeburg.ru pptp,ppp,debug,packet m66: <callback 0x06>
Oct 21 14:43:16 mikrotik.m66.officeburg.ru pptp,ppp,debug,packet m66: <17>: sent LCP ConfRej id=0x6
Oct 21 14:43:16 mikrotik.m66.officeburg.ru pptp,ppp,debug,packet m66: <pcomp>
Oct 21 14:43:16 mikrotik.m66.officeburg.ru pptp,ppp,debug,packet m66: <accomp>
...
 
cypa
newbie
Posts: 25
Joined: Mon Apr 01, 2013 11:20 am

Re: v6.45.6 [stable] is released!

Tue Oct 22, 2019 4:50 am

SOLVED (removed wireless-fp...npk from /file)
--------------------------------------------------------------

Please! I need urgent help - after upgrade wireless interfaces disappeared, no wireless options available
[asurkov@m66.officeburg.ru] /interface> 
bonding          eoip      l2tp-client  mesh         ppp-server    pptp-server  virtual-ethernet  blink    enable           print         
bridge           ethernet  l2tp-server  ovpn-client  pppoe-client  sstp-client  vlan              comment  export           reset-counters
detect-internet  gre       list         ovpn-server  pppoe-server  sstp-server  vpls              disable  find             set           
dot1x            ipip      lte          ppp-client   pptp-client   traffic-eng  vrrp              edit     monitor-traffic  
[asurkov@m66.officeburg.ru] /interface>
and where is wireless npks on file storage
[...] > file print detail where name~"wireless*"
 0 name="wireless-fp-6.45.6-mipsbe.npk" type="package" size=2748.1KiB creation-time=oct/17/2019 18:53:42 package-name="wireless@" 
   package-version="6.45.6" package-build-time=sep/10/2019 09:06:31 package-architecture="mips" 

 1 name="wireless-6.45.6-mipsbe.npk" type="package" size=2748.1KiB creation-time=oct/17/2019 18:54:18 package-name="wireless@" 
   package-version="6.45.6" package-build-time=sep/10/2019 09:06:31 package-architecture="mips" 
[...] >
and I've rebooted it many times

----------------
[...] > /system resource print
                   uptime: 5h31m20s
                  version: 6.45.6 (stable)
               build-time: Sep/10/2019 09:06:31
              free-memory: 75.6MiB
             total-memory: 128.0MiB
                      cpu: MIPS 74Kc V4.12
                cpu-count: 1
            cpu-frequency: 600MHz
                 cpu-load: 9%
           free-hdd-space: 26.5MiB
          total-hdd-space: 128.0MiB
  write-sect-since-reboot: 9874
         write-sect-total: 8580777
               bad-blocks: 0%
        architecture-name: mipsbe
               board-name: RB2011UiAS-2HnD
                 platform: MikroTik
Last edited by cypa on Tue Oct 22, 2019 12:31 pm, edited 1 time in total.
 
sindy
Forum Guru
Forum Guru
Posts: 10205
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.45.6 [stable] is released!

Tue Oct 22, 2019 6:30 am

What does /log print say after reboot? What does /system package print show?
 
dfx
just joined
Posts: 4
Joined: Tue Oct 22, 2019 6:43 pm

Re: v6.45.6 [stable] is released!

Tue Oct 22, 2019 6:50 pm

Hi!

After upgrading from 6.44.1 to 6.45.6 it's not possible to disable dhcp package. RouterBOARD 750G r3. Why?
/system package print
Flags: X - disabled 
 #   NAME                                                VERSION                                                SCHEDULED              
 0   routeros-mmips                                      6.45.6                                                                        
 1   system                                              6.45.6                                                                        
 2 X ipv6                                                6.45.6                                                                        
 3 X wireless                                            6.45.6                                                                        
 4 X hotspot                                             6.45.6                                                                        
 5 X mpls                                                6.45.6                                                                        
 6   routing                                             6.45.6                                                                        
 7 X ppp                                                 6.45.6                                                                        
 8   dhcp                                                6.45.6                                                                        
 9   security                                            6.45.6                                                                        
10   advanced-tools                                      6.45.6                                                                        
11   ntp                                                 6.45.6
Thank you in advance.
 
sindy
Forum Guru
Forum Guru
Posts: 10205
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.45.6 [stable] is released!

Tue Oct 22, 2019 7:01 pm

After upgrading from 6.44.1 to 6.45.6 it's not possible to disable dhcp package. RouterBOARD 750G r3. Why?
Because since 6.45.whatever, package security requires package dhcp to provide a route list to windows IKEv2 clients.
 
dfx
just joined
Posts: 4
Joined: Tue Oct 22, 2019 6:43 pm

Re: v6.45.6 [stable] is released!

Tue Oct 22, 2019 7:10 pm

After upgrading from 6.44.1 to 6.45.6 it's not possible to disable dhcp package. RouterBOARD 750G r3. Why?
Because since 6.45.whatever, package security requires package dhcp to provide a route list to windows IKEv2 clients.
Thanks! It would be nice to see such things in changelogs or somewhere in wiki like 'package dependencies'.
 
sindy
Forum Guru
Forum Guru
Posts: 10205
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.45.6 [stable] is released!

Tue Oct 22, 2019 7:19 pm

It would be nice to see such things in changelogs or somewhere in wiki like 'package dependencies'.
Look again, it is there (in the changelog of the release which has introduced this dependency) and it has also been mentioned multiple times in these "x.xx.x has been released" topics.
 
dfx
just joined
Posts: 4
Joined: Tue Oct 22, 2019 6:43 pm

Re: v6.45.6 [stable] is released!

Tue Oct 22, 2019 7:35 pm

It would be nice to see such things in changelogs or somewhere in wiki like 'package dependencies'.
Look again, it is there (in the changelog of the release which has introduced this dependency) and it has also been mentioned multiple times in these "x.xx.x has been released" topics.
Ok. Got it. It was introduced in the 6.44. But in my router with 6.44.1 dhcp was disabled (though security was enabled). Interesting...
 
arash88
just joined
Posts: 12
Joined: Wed Oct 31, 2018 1:33 pm

Re: v6.45.6 [stable] is released!

Thu Oct 24, 2019 4:17 pm

Hey guys,
I have two separate wireless p2p links, Link1: two sxtlight5nd routers, Link2: two LHG5 routers
After upgrading from 6.43.x to 6.45.6 i noticed both links now have packet drops(ping drops) on both links, nothing else changed but routeros version.
On LHG link sometimes the wireless link completely drops so i have to reboot one of them.
On SXT link the connection remain stable but now my VoIP fxo-fxs over this link experience voice drops and i can't talk to the other side very well.
Anyone else have these problems?
How can i downgrade to latest Long-Term version or 6.43.x? Is it possible?
Last edited by arash88 on Thu Oct 24, 2019 5:38 pm, edited 2 times in total.
 
maryaadmins
just joined
Posts: 4
Joined: Thu Oct 24, 2019 4:19 pm

Re: v6.45.6 [stable] is released!

Thu Oct 24, 2019 4:52 pm

hi
we have dhcp-server behind cisco router (dhcp-relay server)
after upgrade dhcp-server stops giving leases and fills leases with mac-address 00:00:00:00:00:00 and status conflict
disabling conflict detection resolves the issue
 
User avatar
emils
Forum Veteran
Forum Veteran
Topic Author
Posts: 906
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.45.6 [stable] is released!

Mon Oct 28, 2019 4:14 pm

New version 6.45.7 has been released in stable RouterOS channel:

viewtopic.php?f=21&t=153378

Who is online

Users browsing this forum: No registered users and 23 guests