Community discussions

 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 505
Joined: Thu Dec 11, 2014 8:53 am

v6.44.6 [long-term] is released!

Mon Oct 28, 2019 4:10 pm

RouterOS version 6.44.6 has been released in public "long-term" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 6.44.6 (2019-Oct-24 09:37):

MAJOR CHANGES IN v6.44.6:
----------------------
!) package - accept only packages with original filenames (CVE-2019-3976);
!) package - improved package signature verification (CVE-2019-3977);
!) security - fixed improper handling of DNS responses (CVE-2019-3978, CVE-2019-3979);
----------------------


Changes in this release:

*) capsman - fixed frequency setting requiring multiple frequencies;
*) capsman - fixed newline character missing on some logging messages;
*) ccr - improved packet processing after overloading interface;
*) crs312 - fixed combo SFP port toggling (introduced in v6.44.5);
*) crs328 - adjust fan speed based on SFP and CPU temperature;
*) crs3xx - correctly display link rate when 10/100/1000BASE-T SFP modules are used in SFP+ interfaces;
*) crs3xx - fixed management access when using switch rule "new-vlan-priority" property;
*) export - fixed "bootp-support" parameter export;
*) health - improved fan control on CRS3xx and CCR1016-12S-1S+r2;
*) ike2 - fixed policy port selection for responder with natted initiator;
*) ike2 - fixed traffic selector address family selection when using IPv6;
*) interface - fixed missing PWR-LINE section on PL7411-2nD and PL6411-2nD (introduced v6.44);
*) ipsec - allow inline "passphrase" parameter when importing keys;
*) ipsec - fixed minor spelling mistakes in logs;
*) led - fixed default LED configuration for RBLHG5nD;
*) ospf - fixed opaque LSA type checking in OSPFv2;
*) ospf - fixed possible busy loop condition when accessing OSPF LSAs;
*) ospf - improved "unknown" LSA handling in OSPFv3;
*) profile - added "internet-detect" process classificator;
*) radius - fixed open socket leak when invalid packet is received (introduced in v6.44);
*) sfp - fixed "sfp-rx-power" value for some transceivers;
*) smb - improved stability on x86 and CHR;
*) snmp - fixed encrypted data sequence (introduced in v6.44.5);
*) snmp - improved reliability on SNMP service packet validation;
*) ssh - accept remote forwarding requests with empty hostnames;
*) ssh - fixed carriage return presence in subsequent sessions;
*) ssh - improved remote forwarding handling (introduced in v6.44.3);
*) supout - fixed supout file generation outside of internal storage with insufficient space;
*) switch - fix port isolation for non-CRS series switch chips;
*) system - accept only valid string for "name" parameter in "disk" menu (CVE-2019-15055);
*) system - improved system stability for devices with AR9342 SoC;
*) upgrade - fixed "auto-upgrade" to use new style authentication;
*) upnp - fixed XML parsing (FG-VD-19-110);
*) watchdog - renamed "no-ping-delay" parameter to "ping-start-after-boot";
*) winbox - added "auto-erase" parameter to "Tools/SMS" menu;
*) winbox - added "https-redirect" parameter to "IP/Hotspot/Profiles menu";
*) winbox - added "revision" parameter to "System/Routerboard" menu;
*) winbox - removed "max-sms" parameter from "Tools/SMS" menu;
*) wireless - fixed basic rate reporting in snooper;
*) wireless - improved 802.11ac stability for all ARM devices with wireless;
*) wireless - improved range selection when distance set to "dynamic";
*) wireless - improved stability when setting fixed primary and secondary channels on RB4011iGS+5HacQ2HnD-IN;

For a full changelog please visit https://mikrotik.com/download/changelogs

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device

Please keep this forum topic strictly related to this specific RouterOS release.
 
deanMKD1
Member
Member
Posts: 350
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: v6.44.6 [long-term] is released!

Mon Oct 28, 2019 5:41 pm

Upgraded my hAP AC2 without problems. Tested WiFi, and seems more stable then even before. No High CPU usage or RAM usage (ram consumation seems lower then 4.43.15 long term). Thanks Mikrotik for this stable build.
 
petern
just joined
Posts: 23
Joined: Wed Dec 13, 2017 5:58 pm

Re: v6.44.6 [long-term] is released!

Mon Oct 28, 2019 6:30 pm

Good news, my hAP lite which refused to update to 6.44.5 due to space was able to successfully update to 6.44.6! No need for a netinstall.
 
whatever
Member Candidate
Member Candidate
Posts: 106
Joined: Thu Jun 21, 2018 9:29 pm

Re: v6.44.6 [long-term] is released!

Tue Oct 29, 2019 10:13 am

I have successfully updated 4x hap ac², haven't noticed any issues yet. I'm curios to see if 5GHz wifi stability has really improved.

Edit: 5GHz is still crashing/disappearing, waiting for the latest beta changes to get backported.
Last edited by whatever on Sun Nov 10, 2019 11:08 am, edited 1 time in total.
 
deanMKD1
Member
Member
Posts: 350
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: v6.44.6 [long-term] is released!

Tue Oct 29, 2019 10:44 am

I have successfully updated 4x hap ac², haven't noticed any issues yet. I'm curios to see if 5GHz wifi stability has really improved.
Do you tested 5ghz ? 2.4ghz seems very stable for me.
 
phillipegandini
just joined
Posts: 2
Joined: Thu Apr 26, 2018 11:43 pm

Re: v6.44.6 [long-term] is released!

Tue Oct 29, 2019 4:58 pm

30+ equipments upgraded (RB912 family, RB921 family and RB750Pr2)... so far so good :)
 
105547111
Member Candidate
Member Candidate
Posts: 132
Joined: Fri Jun 22, 2012 9:46 pm

Re: v6.44.6 [long-term] is released!

Tue Oct 29, 2019 6:04 pm

18 Upgraded without issue. Ranging from CCR1016, CRS125, RB951G, SXT5AC, CHR, no issues.
 
DanchoDimitrov
just joined
Posts: 9
Joined: Wed Jul 03, 2019 10:10 pm
Location: Bulgaria

Re: v6.44.6 [long-term] is released!

Tue Oct 29, 2019 10:49 pm

hAP ac2
on 5g
Tx rate picks up very slowly after a device is connected.
If the freq. is set to auto, it thinks a lot about detecting radar, i gave up and put it on a non DFS channel.
Ping seems fine, ill play with it more tomorrow and add to this reply if I find anything wrong.
hAP AC^2
 
Babek
just joined
Posts: 21
Joined: Sun Apr 03, 2011 10:02 am

Re: v6.44.6 [long-term] is released!

Wed Oct 30, 2019 8:32 am

i found strange problem my CCR - works as DNS-cache and uses dns servers from my 2 bind resolvers after upgrade i noticed that google site doesn't work - put first DNS - as 8.8.8.8 works again - but it resolves google address correctly ping response properly - strange it worked before today's upgrade. I'll look closer to my dns servers why they do not work with google main page. other sites looks like work perfeclty.
Strange that searching via chromium browser works even if main google page doesn't
 
User avatar
Caci99
Forum Guru
Forum Guru
Posts: 1064
Joined: Wed Feb 21, 2007 2:26 pm
Location: Tirane
Contact:

Re: v6.44.6 [long-term] is released!

Wed Oct 30, 2019 11:17 am

hAP ac2
on 5g
Tx rate picks up very slowly after a device is connected.
If the freq. is set to auto, it thinks a lot about detecting radar, i gave up and put it on a non DFS channel.
Ping seems fine, ill play with it more tomorrow and add to this reply if I find anything wrong.
As far as I know, the 5GHz is dependable on regulatory countries (so is 2.4) when setting DFS. When DFS enabled it will look for free frequencies and will wait 1 minute to check the availability of that frequency, if still free than it will select it.
I have disabled DFS on a lot of installations and things run smooth, but of course I am braking the regulatory rules ;)
-Toni-
Don't crash the ambulance, whatever you do
 
DanchoDimitrov
just joined
Posts: 9
Joined: Wed Jul 03, 2019 10:10 pm
Location: Bulgaria

Re: v6.44.6 [long-term] is released!

Wed Oct 30, 2019 11:27 am

...When DFS enabled it will look for free frequencies and will wait 1 minute to check the availability of that frequency...
As far as i know, DFS scan can take around 10 minutes on some channels.
hAP AC^2
 
marisspringis
just joined
Posts: 12
Joined: Wed Dec 12, 2018 2:17 pm

Re: v6.44.6 [long-term] is released!

Wed Oct 30, 2019 1:16 pm

Updated my home Hap AC2 and 5Ghz WiFi works great :) before this used 6.45.6 stable and with that all my ios devices constantly after every 4 minutes got reassociating -> disconect -> connect....
with this update everything works just great, only time i see disconection is when ios device conects to 2Ghz from 5Ghz or vice versa

thx Mikrotik
 
mtzmt
just joined
Posts: 5
Joined: Wed Oct 30, 2019 12:20 am

Re: v6.44.6 [long-term] is released!

Wed Oct 30, 2019 3:18 pm

Hi,
I am sorry, I have maybe dumb question, I am new here, I tried to find out why don't see in upgrades this "long-term" version. I have RB962UiGS-5HacT2HnT hAP running on 6.42.11 and in winbox I see that it is actual or latest version. Is it correct? I have some problems with IPSec/IKEv2 rekeying and want to try newer version.
thanks.
 
storp
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Nov 24, 2015 2:53 pm

Re: v6.44.6 [long-term] is released!

Wed Oct 30, 2019 3:53 pm

Updated my home network yesterday shortly after the release. Running it on RB4011, cAP AC, wAP AC, cAP and a CHR. Seems to work fine.
 
User avatar
Caci99
Forum Guru
Forum Guru
Posts: 1064
Joined: Wed Feb 21, 2007 2:26 pm
Location: Tirane
Contact:

Re: v6.44.6 [long-term] is released!

Wed Oct 30, 2019 4:58 pm

Hi,
I am sorry, I have maybe dumb question, I am new here, I tried to find out why don't see in upgrades this "long-term" version. I have RB962UiGS-5HacT2HnT hAP running on 6.42.11 and in winbox I see that it is actual or latest version. Is it correct? I have some problems with IPSec/IKEv2 rekeying and want to try newer version.
thanks.
Either download the file from mikrotik, or change the channel to bugfix. I think it was after 6.43 they started calling long-term and stable, before that (your version) it was called bugfix and current.
-Toni-
Don't crash the ambulance, whatever you do
 
maryaadmins
just joined
Posts: 4
Joined: Thu Oct 24, 2019 4:19 pm

Re: v6.44.6 [long-term] is released!

Thu Oct 31, 2019 11:22 am

hi
we have dhcp-server behind cisco router (dhcp-relay server)
after upgrade dhcp-server stops giving leases and fills leases with mac-address 00:00:00:00:00:00 and status busy
disabling conflict detection resolves the issue
 
slagjanj
just joined
Posts: 1
Joined: Thu Oct 31, 2019 3:07 pm

Re: v6.44.6 [long-term] is released!

Thu Oct 31, 2019 3:11 pm

There is possible bug with SNMP
command snmp-get produce error

example :
/tool snmp-get address=192.168.20.1 community=public oid=.1.3.6.1.2.1.2.2.1.2.3
error - contact MikroTik support and send a supout file (3)


with v6.44.5 is OK
also last stable version produce same error
 
User avatar
Leon565
just joined
Posts: 3
Joined: Thu Oct 31, 2019 3:00 pm

Re: v6.44.6 [long-term] is released!

Thu Oct 31, 2019 3:29 pm

Hello ! After upgrading from 6.44.2 to 6.44.6, the PPTP stopped working. L2TP and OpenVPN work well. RouterBOARD 750G r3.
Last edited by Leon565 on Fri Nov 01, 2019 4:15 am, edited 1 time in total.
 
roe1974
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Mon Dec 31, 2018 2:14 pm

Re: v6.44.6 [long-term] is released!

Thu Oct 31, 2019 4:16 pm

I had a problem after upgrade on LtAP with DHCP Server and the raspberry on the ETH Port.
I took 2-3 LtAP reboots so that the Raspberry finally got a IP adresse from DHCP ( always ETH down/ETH up/ETH down/ETH up ....)

Richard
 
roe1974
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Mon Dec 31, 2018 2:14 pm

Re: v6.44.6 [long-term] is released!

Thu Oct 31, 2019 10:15 pm

same problem after each reboot of the raspi :-(
 
User avatar
Caci99
Forum Guru
Forum Guru
Posts: 1064
Joined: Wed Feb 21, 2007 2:26 pm
Location: Tirane
Contact:

Re: v6.44.6 [long-term] is released!

Fri Nov 01, 2019 10:30 am

Hello ! After upgrading from 6.44.2 to 6.44.6, the PPTP stopped working. L2TP and OpenVPN work well. RouterBOARD 750G r3.
Glad that PPTP does not work. It is so outdated and unsecured that undoes the purpose of VPN. Stick to L2TP with IPSEC or OpenVPN.
-Toni-
Don't crash the ambulance, whatever you do
 
User avatar
Caci99
Forum Guru
Forum Guru
Posts: 1064
Joined: Wed Feb 21, 2007 2:26 pm
Location: Tirane
Contact:

Re: v6.44.6 [long-term] is released!

Fri Nov 01, 2019 10:32 am

I had a problem after upgrade on LtAP with DHCP Server and the raspberry on the ETH Port.
I took 2-3 LtAP reboots so that the Raspberry finally got a IP adresse from DHCP ( always ETH down/ETH up/ETH down/ETH up ....)

Richard
Those are symptoms of no synchronization between the two ethernet interfaces. Check the ethernet cable, routerboard log, change the settings of the ethernet interface.
-Toni-
Don't crash the ambulance, whatever you do
 
msatter
Forum Guru
Forum Guru
Posts: 1281
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: v6.44.6 [long-term] is released!

Fri Nov 01, 2019 11:07 am

Entering a address range with a slash, gives an error when you don't get it right, however you get an error states that the DNS is not correct and this could be more specific.
validDNS.JPG
I am on beta 59 of 6.46....so I am in the wrong release of RouterOS but the described mismatch exits also in older versions.
You do not have the required permissions to view the files attached to this post.
Last edited by msatter on Sat Nov 02, 2019 12:57 am, edited 1 time in total.
Two RB760iGS (hEX S) in series. One does PPPoE and both do IKEv2.
Running:
RouterOS 6.46Beta59 / Winbox 3.20 / MikroTik APP 1.3.7
Having an Android device, use https://github.com/M66B/NetGuard/releases (no root required)
 
roe1974
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Mon Dec 31, 2018 2:14 pm

Re: v6.44.6 [long-term] is released!

Fri Nov 01, 2019 11:45 am

I had a problem after upgrade on LtAP with DHCP Server and the raspberry on the ETH Port.
I took 2-3 LtAP reboots so that the Raspberry finally got a IP adresse from DHCP ( always ETH down/ETH up/ETH down/ETH up ....)

Richard
Those are symptoms of no synchronization between the two ethernet interfaces. Check the ethernet cable, routerboard log, change the settings of the ethernet interface.

I have nothing changed .. just updated to 6.44.6 ... and in the log i see only ETH up, ETH down ... and the raspi is not getting an IP adress from DHCP ....
richard
 
User avatar
Leon565
just joined
Posts: 3
Joined: Thu Oct 31, 2019 3:00 pm

Re: v6.44.6 [long-term] is released!

Fri Nov 01, 2019 1:38 pm

to Caci99
All customers use L2TP/IPsec and OVPN, but there is a Keenetic-4GII which has only PPTP!
 
User avatar
Caci99
Forum Guru
Forum Guru
Posts: 1064
Joined: Wed Feb 21, 2007 2:26 pm
Location: Tirane
Contact:

Re: v6.44.6 [long-term] is released!

Fri Nov 01, 2019 4:39 pm

to Caci99
All customers use L2TP/IPsec and OVPN, but there is a Keenetic-4GII which has only PPTP!
PPTP is dependable on GRE. They have changed how GRE handles first packets ( version 6.44.3 maybe ).
If you go to that topic you will see some workarounds how to handle the GRE connections.
-Toni-
Don't crash the ambulance, whatever you do
 
User avatar
Leon565
just joined
Posts: 3
Joined: Thu Oct 31, 2019 3:00 pm

Re: v6.44.6 [long-term] is released!

Sat Nov 02, 2019 3:21 am

to Caci99
All customers use L2TP/IPsec and OVPN, but there is a Keenetic-4GII which has only PPTP!
PPTP is dependable on GRE. They have changed how GRE handles first packets ( version 6.44.3 maybe ).
If you go to that topic you will see some workarounds how to handle the GRE connections.
Thanks for the help
.....the PPTPhelper must be enabled in ip firewall service-port.......
1.png
You do not have the required permissions to view the files attached to this post.
 
roe1974
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Mon Dec 31, 2018 2:14 pm

Re: v6.44.6 [long-term] is released!

Sat Nov 02, 2019 7:54 am

is there a deeper loging possibility on mikrotik ? i just see eth interface down / eth interface up / down / up ....
after a while the interface is up and the connection stable until next reboot from raspi
richard
 
roe1974
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Mon Dec 31, 2018 2:14 pm

Re: v6.44.6 [long-term] is released!

Sat Nov 02, 2019 9:59 am

there must be a problem with LtAP and 6.44.6

i have a raspberry connected to eth0 (the LtAP is powered over POE) ....
everytime when i restart the raspi ... i see a eth up/down/up/down ... and no DHCP IP is assigned.
When i disable the eth port for 1-2 minutes .... then enable the eth port ... then the raspi connect end get an IP adress.
Rebooting the raspi again and i have the same problem .... (cable and injector allready changed)

please help

Richard
 
User avatar
Caci99
Forum Guru
Forum Guru
Posts: 1064
Joined: Wed Feb 21, 2007 2:26 pm
Location: Tirane
Contact:

Re: v6.44.6 [long-term] is released!

Sat Nov 02, 2019 10:09 am

there must be a problem with LtAP and 6.44.6

i have a raspberry connected to eth0 (the LtAP is powered over POE) ....
everytime when i restart the raspi ... i see a eth up/down/up/down ... and no DHCP IP is assigned.
When i disable the eth port for 1-2 minutes .... then enable the eth port ... then the raspi connect end get an IP adress.
Rebooting the raspi again and i have the same problem .... (cable and injector allready changed)

please help

Richard
Downgrade to previous version and see if the problems goes away. If you see no problem in previous version, then write to mikrotik support, if the problem persists then open a new topic because it is not related to this topic.
-Toni-
Don't crash the ambulance, whatever you do
 
roe1974
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Mon Dec 31, 2018 2:14 pm

Re: v6.44.6 [long-term] is released!

Sat Nov 02, 2019 11:44 am

can i downgrade when routerboard firmware is allready on 6.44.6 ?
richard
 
User avatar
Deantwo
Member
Member
Posts: 308
Joined: Tue Sep 30, 2014 4:07 pm

Re: v6.44.6 [long-term] is released!

Tue Nov 05, 2019 11:09 am

can i downgrade when routerboard firmware is allready on 6.44.6 ?
richard
Bootloader firmware is not the same as the RouterOS.
You need to downgrade the RouterOS version, not the bootloader firmware.
/system package print
Will show the RouterOS version installed and all packages installed and if they are enabled.
See also: https://wiki.mikrotik.com/wiki/Manual:R ... owngrading

If you have more issues, please make a separate thread in the general RouterOS forum.
Here: viewforum.php?f=2
I wish my FTP was FTL.
 
doncarlosru
just joined
Posts: 1
Joined: Tue Apr 09, 2019 11:41 am

Re: v6.44.6 [long-term] is released!

Tue Nov 05, 2019 2:06 pm

i found strange problem my CCR - works as DNS-cache and uses dns servers from my 2 bind resolvers after upgrade i noticed that google site doesn't work - put first DNS - as 8.8.8.8 works again - but it resolves google address correctly ping response properly - strange it worked before today's upgrade. I'll look closer to my dns servers why they do not work with google main page. other sites looks like work perfeclty.
Strange that searching via chromium browser works even if main google page doesn't
I have similar strange problem with DNS on CCR.
Resolving on clients that use CCR as a DNS server does not work in half the cases.
Problems is include DNS static records on CCR.

I'm DNATed incoming DNS requests from CCR to hEX with 6.44.6, and it's work!
Problem is CCR specific.
 
roe1974
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Mon Dec 31, 2018 2:14 pm

Re: v6.44.6 [long-term] is released!

Wed Nov 06, 2019 11:24 am

Hello

Is this point from 6.45.1 stable allready implemented in longterm Version ?

*) rb4011 - fixed MAC address duplication between sfp-sfpplus1 and wlan1 interfaces (wlan1 configuration reset required)

thx for info, Richard
 
LewisH95
just joined
Posts: 14
Joined: Thu Oct 31, 2019 1:01 pm

Re: v6.44.6 [long-term] is released!

Thu Nov 07, 2019 4:23 pm

Thanks! this information is helpful. But while upgrading to v6.44.7 I got lots of errors. I don't know what they meant. what should I do to troubleshoot?
Regards,
Lewis
 
easyspot
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Thu Jun 07, 2012 7:09 pm

Re: v6.44.6 [long-term] is released!

Fri Nov 08, 2019 4:44 am

Woah u really live in the future. We all here still at 6.44.6 n u already at 6.44.7 lol.
Upgraded all devices here n all stable.
ARM based wifi ac got stability improvement.
SMIPS upgrade easily if only install 11 packages instead of 13. Kickin tr069 n hotspot package.
 
mducharme
Trainer
Trainer
Posts: 868
Joined: Tue Jul 19, 2016 6:45 pm

Re: v6.44.6 [long-term] is released!

Sun Nov 10, 2019 8:29 am

We just found that the OSPFv3 changes in 6.44.6 appear to cause problems with neighbor with Cisco switch with IPv6 (C3560 Software (C3560-IPSERVICESK9-M), Version 15.0(2)SE11, RELEASE SOFTWARE (fc3)). Downgrading to 6.44.5 resolves it. Careful if your router needs OSPFv3 neighbour with Cisco devices.
 
User avatar
Deantwo
Member
Member
Posts: 308
Joined: Tue Sep 30, 2014 4:07 pm

Re: v6.44.6 [long-term] is released!

Tue Nov 12, 2019 10:26 am

Thanks! this information is helpful. But while upgrading to v6.44.7 I got lots of errors. I don't know what they meant. what should I do to troubleshoot?
Regards,
Lewis
RouterOS v6.44.7 does not exist (yet?), so that could be your issue.
If something is suggesting that there is a v6.44.7 but failing to download/install it, it might mean that the CVE fixes in this update are working as expected.
You should secure your router as it could be compromised.

If you meant you were having trouble upgrading to v6.44.6, then you need to actually show some of the errors if you want help.
You can make post them here if you think they are directly related to the v6.44.6 version, you can email support@mikrotik.com for direct support, or you can make a new thread in the general RouterOS help forum viewforum.php?f=2 if you just need help in general.
I wish my FTP was FTL.
 
Sob
Forum Guru
Forum Guru
Posts: 4784
Joined: Mon Apr 20, 2009 9:11 pm

Re: v6.44.6 [long-term] is released!

Tue Nov 12, 2019 5:10 pm

Don't bother, if this "LewisH95" is not just creative spammer establishing ground, I'll eat my hat. All his posts are either copy & paste from elsewhere, just containing keywords related to thread subject, or straight nonsense like this one.
People who quote full posts should be spanked with ethernet cable. Some exceptions for multi-topic threads may apply.
 
anav
Forum Guru
Forum Guru
Posts: 3100
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada

Re: v6.44.6 [long-term] is released!

Tue Nov 12, 2019 5:45 pm

I always knew that you were actually S. Holmes!! Your detective skills are inspiring!
I'd rather manage rats than software. Follow my advice at your own risk! (Sob & mkx forced me to write that!)
 
sindy
Forum Guru
Forum Guru
Posts: 3897
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.44.6 [long-term] is released!

Tue Nov 12, 2019 8:56 pm

I'll eat my hat.
Be careful and maybe think of purchasing one of these just for the case, as although I have the same opinion as you, I've come across one of his posts which made sense in the context of the topic. So maybe he's actually doing his PhD on AI, and he'll finally be giving a perfect answer to each new topic through using the aggregate wisdom of all the posts on this forum written ever since it has been incepted.
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.

Who is online

Users browsing this forum: No registered users and 14 guests