Community discussions

MikroTik App
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 668
Joined: Thu Dec 11, 2014 8:53 am

WinBox v3.27 released!

Wed Sep 02, 2020 10:40 am

What's new in v3.26:

*) fixed CAPsMAN service failure when viewing Radios table;
*) fixed Hotspot service failure when viewing Hosts table;
*) support Ctrl++ & Ctrl+- on keypad for quick access to Zoom In/Zoom Out;

What's new in v3.27:

*) fixed content drawing of read-only tables (introduced in v3.26);

If you experience version related issues, then please report them to support@mikrotik.com.

Both Winbox 32-bit and 64-bit versions are available here:
https://www.mikrotik.com/download
 
User avatar
xvo
Forum Guru
Forum Guru
Posts: 1090
Joined: Sat Mar 03, 2018 1:12 am
Location: Moscow, Russia

Re: WinBox v3.26 released!

Wed Sep 02, 2020 11:09 am

Log window is showing no entries.
 
Kindis
Member
Member
Posts: 347
Joined: Tue Nov 01, 2011 6:54 pm
Location: Sweden

Re: WinBox v3.26 released!

Wed Sep 02, 2020 11:14 am

In CapsMAN under configuration I cannot configure a country anymore. It only says unknown and there are not options in the drop down list and I do not se anything under Radio.
I have cleared the cache and it did not help anything. Note that this might have been true under 3,25 as well. Saw this when I looked under Caps Interfaces and saw that country said unknown.
Edit: I have tested both 32 and 64 bit version and same issue + I also do not see anything under log.
Edit2: Sent all to support@mikrotik.com
 
glat
just joined
Posts: 7
Joined: Mon Oct 06, 2014 6:45 pm

Re: WinBox v3.26 released!

Wed Sep 02, 2020 11:40 am

File window is empty, too.
 
dvm
just joined
Posts: 22
Joined: Thu Feb 01, 2018 9:54 am

Re: WinBox v3.26 released!

Wed Sep 02, 2020 11:45 am

Log and File windows are empty.
 
rua
just joined
Posts: 20
Joined: Fri Aug 01, 2014 8:53 pm
Location: copenhagen, DK

Re: WinBox v3.26 released!

Wed Sep 02, 2020 11:47 am

File window is empty, too.
also here, ccr1016, rb2011 and ccr1009 all shows NO log entries, same applies to files content.
MTCNA, MTCRE
Copenhagen, Denmark
Consulting, building and managing networks.
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 668
Joined: Thu Dec 11, 2014 8:53 am

Re: WinBox v3.27 released!

Wed Sep 02, 2020 11:50 am

What's new in v3.27:

*) fixed content drawing of read-only tables (introduced in v3.26);

If you experience version related issues, then please report them to support@mikrotik.com.

Both Winbox 32-bit and 64-bit versions are available here:
https://www.mikrotik.com/download
 
Kindis
Member
Member
Posts: 347
Joined: Tue Nov 01, 2011 6:54 pm
Location: Sweden

Re: WinBox v3.27 released!

Wed Sep 02, 2020 11:52 am

What's new in v3.27:

*) fixed content drawing of read-only tables (introduced in v3.26);
Many thanks for a super quick response! All my issues are now gone!
 
prislonsky
just joined
Posts: 1
Joined: Tue Sep 18, 2018 1:05 pm
Location: Ukraine
Contact:

Re: WinBox v3.26 released!

Wed Sep 02, 2020 11:54 am

File window is empty, too.
also here, ccr1016, rb2011 and ccr1009 all shows NO log entries, same applies to files content.
CCR1009, rb2011 same problem, but CCR1036 - only file list empty
 
rua
just joined
Posts: 20
Joined: Fri Aug 01, 2014 8:53 pm
Location: copenhagen, DK

Re: WinBox v3.27 released!

Wed Sep 02, 2020 11:58 am

What's new in v3.27:

*) fixed content drawing of read-only tables (introduced in v3.26);
Thanks for a VERY rapid and successfully upgrade.
Respekt.
MTCNA, MTCRE
Copenhagen, Denmark
Consulting, building and managing networks.
 
pendie
just joined
Posts: 4
Joined: Wed Jun 03, 2020 3:32 pm

Re: WinBox v3.27 released!

Wed Sep 02, 2020 1:42 pm

Log window empty
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 668
Joined: Thu Dec 11, 2014 8:53 am

Re: WinBox v3.27 released!

Wed Sep 02, 2020 2:12 pm

Anyone still having issues with blank windows/tables, please verify you are using WinBox v3.27 instead of v3.26.
 
User avatar
karlisi
Member
Member
Posts: 334
Joined: Mon May 31, 2004 8:09 am
Location: Latvia

Re: WinBox v3.27 released!

Wed Sep 02, 2020 4:42 pm

Wow, that was fast! Thank you!
---
Karlis
 
User avatar
rushlife
Member Candidate
Member Candidate
Posts: 144
Joined: Thu Nov 05, 2015 12:30 pm
Location: czech republic

Re: WinBox v3.27 released!

Wed Sep 02, 2020 5:38 pm

thx Mikrotik
 
Christophe
just joined
Posts: 2
Joined: Wed Sep 02, 2020 7:55 pm

Re: WinBox v3.27 released!

Wed Sep 02, 2020 8:09 pm

Thanks will try it!
 
User avatar
k6ccc
Long time Member
Long time Member
Posts: 604
Joined: Fri May 13, 2016 12:01 am
Location: Glendora, CA, USA (near Los Angeles)

Re: WinBox v3.27 released!

Wed Sep 02, 2020 10:05 pm

Good grief, I just downloaded 3.25 yesterday..

Anyway with 3.27 (64 bit version), file list and log are working on my RB750Gr3 and RB750r2.
RB750Gr3, RB750r2, CRS326-24G-2S (in SwitchOS), CSS326-24G-2S, CSS106-5G-1S, RB260GS
Not sure if I beat them in submission, or they beat me into submission

Warning: I know enough to be dangerous...

Jim
 
killersoft
Member Candidate
Member Candidate
Posts: 167
Joined: Mon Apr 11, 2011 2:34 pm
Location: Victoria, Australia
Contact:

Re: WinBox v3.27 released!

Thu Sep 03, 2020 5:46 am

Just tried to use 3.27 on a RB2011(current long term). I cannot add data to the firewall -> NAT, each line goes blank when I highlight it..
I need to revert to an older version now.
MTCNA
MIT, BIT,CERT IV Electronics.
ITIL
 
User avatar
k6ccc
Long time Member
Long time Member
Posts: 604
Joined: Fri May 13, 2016 12:01 am
Location: Glendora, CA, USA (near Los Angeles)

Re: WinBox v3.27 released!

Thu Sep 03, 2020 6:28 am

Can't replicate that on my RB750r2 with 6.47.1. Worked fine.
RB750Gr3, RB750r2, CRS326-24G-2S (in SwitchOS), CSS326-24G-2S, CSS106-5G-1S, RB260GS
Not sure if I beat them in submission, or they beat me into submission

Warning: I know enough to be dangerous...

Jim
 
User avatar
karlisi
Member
Member
Posts: 334
Joined: Mon May 31, 2004 8:09 am
Location: Latvia

Re: WinBox v3.27 released!

Thu Sep 03, 2020 10:28 am

RB2011 ROS 6.45.9 (long-term), no problems with NAT rules.
---
Karlis
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 5705
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: WinBox v3.27 released!

Thu Sep 03, 2020 2:43 pm

Good grief, I just downloaded 3.25 yesterday..

Anyway with 3.27 (64 bit version), file list and log are working on my RB750Gr3 and RB750r2.
Good grief, do you not check for updates at least twice daily??
I'd rather manage rats than software. Follow my advice at your own risk! (Sob & mkx forced me to write that!)
MTUNA Certified, by the Ascerbic Llama!
 
User avatar
k6ccc
Long time Member
Long time Member
Posts: 604
Joined: Fri May 13, 2016 12:01 am
Location: Glendora, CA, USA (near Los Angeles)

Re: WinBox v3.27 released!

Thu Sep 03, 2020 6:25 pm

Good grief, I just downloaded 3.25 yesterday..

Anyway with 3.27 (64 bit version), file list and log are working on my RB750Gr3 and RB750r2.
Good grief, do you not check for updates at least twice daily??
I know you are largely just being funny anav...
Actually I check this forum fairly regularly, and I do take note of the announcements at the top. Depending on how important an update is to me, and how much time I have will often dictate how quickly I download updates. There was nothing critical for me with WinBox 3.25, so it waited a few days until I had some free time to download 3.25 and install it on the three computers that have WinBox. Since there was a reported issue with 3.26 that was fixed in 3.27, and I had time yesterday, it was easy to download that and test it.
RB750Gr3, RB750r2, CRS326-24G-2S (in SwitchOS), CSS326-24G-2S, CSS106-5G-1S, RB260GS
Not sure if I beat them in submission, or they beat me into submission

Warning: I know enough to be dangerous...

Jim
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Thu Sep 03, 2020 9:19 pm

What's new in v3.27:

*) fixed content drawing of read-only tables (introduced in v3.26);
I did not try that version at first (because I did not install 3.26) but now I got a message from OskarsK asking if it fixes the column/rule dragging problem, and indeed it seems that this issue is now resolved! (I cannot reproduce it)
So others can try as well to see if this version works for them.

Thanks Oskars!
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 5705
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: WinBox v3.27 released!

Thu Sep 03, 2020 11:54 pm

Hi k6, damn you are now immune to my sarcasm. Too funny as I did the same thing never switched to 3.26 LOL, I may have even been on 3.24.
No one uses the expression Good grief in North America anymore, just found it amusing.
I'd rather manage rats than software. Follow my advice at your own risk! (Sob & mkx forced me to write that!)
MTUNA Certified, by the Ascerbic Llama!
 
User avatar
Cha0s
Forum Guru
Forum Guru
Posts: 1026
Joined: Tue Oct 11, 2005 4:53 pm

Re: WinBox v3.27 released!

Fri Sep 04, 2020 3:16 am

What's new in v3.27:

*) fixed content drawing of read-only tables (introduced in v3.26);
I did not try that version at first (because I did not install 3.26) but now I got a message from OskarsK asking if it fixes the column/rule dragging problem, and indeed it seems that this issue is now resolved! (I cannot reproduce it)
So others can try as well to see if this version works for them.

Thanks Oskars!
It hasn't resolved on my end.
Both on Windows 7 64bit & Windows 10 64bit.
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Fri Sep 04, 2020 11:07 am

It hasn't resolved on my end.
Both on Windows 7 64bit & Windows 10 64bit.
Hmm now that I try again after it has been open for some time, the problem indeed is still there!
Pity...
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Fri Sep 04, 2020 2:11 pm

Another issue that I see now I use 3.27 for a while (but I think it has been introduced in 3.22 or later):
When the log window is displayed, and the number of lines in the window is not a whole number, new log lines at the bottom are not readable.
They become readable when the window is scrolled down manually (a line fragment that is blank appears below the last line).
Please make the log window scroll to that position automatically.
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 5705
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: WinBox v3.27 released!

Fri Sep 04, 2020 2:45 pm

Another issue that I see now I use 3.27 for a while (but I think it has been introduced in 3.22 or later):
When the log window is displayed, and the number of lines in the window is not a whole number, new log lines at the bottom are not readable.
They become readable when the window is scrolled down manually (a line fragment that is blank appears below the last line).
Please make the log window scroll to that position automatically.
I was not aware that the Router OS produced a 1/2 line or 1/4 line or 3/4 line? ;-PP
I'd rather manage rats than software. Follow my advice at your own risk! (Sob & mkx forced me to write that!)
MTUNA Certified, by the Ascerbic Llama!
 
msatter
Forum Guru
Forum Guru
Posts: 1968
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: WinBox v3.27 released!

Fri Sep 04, 2020 2:55 pm

Another issue that I see now I use 3.27 for a while (but I think it has been introduced in 3.22 or later):
When the log window is displayed, and the number of lines in the window is not a whole number, new log lines at the bottom are not readable.
They become readable when the window is scrolled down manually (a line fragment that is blank appears below the last line).
Please make the log window scroll to that position automatically.
I had that also for a long time. On checking I see that it now shows the whole line and a partly blank line under that. So with me this partly showing and scrolling to see the last line, is solved.
One RB4011 (cooled) and a RB760iGS (hEX S) in series. The 4011 Does PPPoE/IKEv2.
The cooler: viewtopic.php?f=3&t=138613&start=300#p799879
Running:
RouterOS 6.48beta58 / Winbox 3.27 64bits / MikroTik APP 1.3.15
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Fri Sep 04, 2020 4:14 pm

For me, it shows everything when I manually scroll down 1 line, but then when a new logline appears it again is not visible.
The window auto-scrolls when new lines are added, but just a tiny bit too little.
 
User avatar
Cha0s
Forum Guru
Forum Guru
Posts: 1026
Joined: Tue Oct 11, 2005 4:53 pm

Re: WinBox v3.27 released!

Fri Sep 04, 2020 4:53 pm

This issue (autoscroll hiding the last line) actually exists since forever. If you run ping and resize the window a little bit, you can make it hide the last line, just the way you see it now in the log window.

It all has to do with the correct window size for autoscroll to work properly.

Annoying, but not unusable (at least I've gotten used to it over the years).
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Fri Sep 04, 2020 5:29 pm

This issue (autoscroll hiding the last line) actually exists since forever. If you run ping and resize the window a little bit, you can make it hide the last line, just the way you see it now in the log window.

It all has to do with the correct window size for autoscroll to work properly.
Maybe it has to do with the changed line spacing in the log window causing my existing window size to be no multiple of a line height anymore...
I usually open a Log window in winbox and set it max size, and then I open all other windows on top of that. So I cannot really control the size of the log window.
 
msatter
Forum Guru
Forum Guru
Posts: 1968
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: WinBox v3.27 released!

Mon Sep 07, 2020 5:08 pm

I see it again on on my other router.

Half hidden bottom line when the counter in the bottom bar is a even number, when the counter is a uneven number window will scroll up making all lines visible again.
One RB4011 (cooled) and a RB760iGS (hEX S) in series. The 4011 Does PPPoE/IKEv2.
The cooler: viewtopic.php?f=3&t=138613&start=300#p799879
Running:
RouterOS 6.48beta58 / Winbox 3.27 64bits / MikroTik APP 1.3.15
 
tpedko
just joined
Posts: 5
Joined: Wed May 22, 2019 9:58 am

Re: WinBox v3.27 released!

Mon Sep 07, 2020 5:55 pm

Add Ctrl+C & Ctrl+V
 
vitaly2016
newbie
Posts: 49
Joined: Wed Jan 20, 2016 9:26 am
Location: Ukraine

Re: WinBox v3.27 released!

Mon Sep 07, 2020 8:16 pm

Dear devs!
Please make search (filter) in Comments case insensitive.
What's new in v3.27:
*) fixed content drawing of read-only tables (introduced in v3.26);
 
alibalalo
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Wed Feb 18, 2015 10:48 pm

Re: WinBox v3.27 released!

Tue Sep 08, 2020 8:40 pm

There is a problem displaying some windows
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1875
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: WinBox v3.27 released!

Tue Sep 08, 2020 8:45 pm

@alibalalo:

If you go to a doctor do you say only "I'm ill" and expect proper treatment?
Real admins use real keyboards.
To quote or not to quote, there is the topic: viewtopic.php?f=2&t=168474
 
User avatar
osc86
Member Candidate
Member Candidate
Posts: 108
Joined: Wed Aug 09, 2017 1:15 pm

Re: WinBox v3.27 released!

Wed Sep 09, 2020 2:37 pm

Menu: Session -> New doesn't do anything
 
irghost
Member Candidate
Member Candidate
Posts: 291
Joined: Sun Feb 21, 2016 1:49 pm

Re: WinBox v3.27 released!

Thu Sep 10, 2020 11:48 am

Ping tool does not show any interface
Image
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
oskarsk
MikroTik Support
MikroTik Support
Posts: 23
Joined: Mon May 13, 2019 9:41 am

Re: WinBox v3.27 released!

Thu Sep 10, 2020 11:58 am

Thanks, everyone for posting your findings.
The issue with missing fields as by irghost post will be fixed in the next release. To avoid this at the moment, do not use the maximized inner window.
Session > new, opens up a new session, and will not save upon exit if it's not done manually.
 
User avatar
osc86
Member Candidate
Member Candidate
Posts: 108
Joined: Wed Aug 09, 2017 1:15 pm

Re: WinBox v3.27 released!

Thu Sep 10, 2020 12:28 pm

Session > new, opens up a new session, and will not save upon exit if it's not done manually.
It may worked like this in previous versions, but with 3.27 it opens up nothing.
Tested on Windows 10 x64 and wine64.
It should open a new winbox window where you can select a new session.
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Thu Sep 10, 2020 12:33 pm

Session > new, opens up a new session, and will not save upon exit if it's not done manually.
osc86 is probably confused what a "session" is and expected that a new session means a new connection (so the same as the New WinBox button).
It should open a new winbox window where you can select a new session.
No a session is not a connection! A session is the winbox term for a saved set of UI settings (like open windows, selected columns, column width, etc)

The whole concept of "saved sessions" is not very clear to many new users and it isn't really explained in the manual either.
It would be helpful to have some documentation and some more features around the session mechanism:
- a "save as default" which is then used for new connections that have <own> session, maybe a different one per Group.
(I know that you can just copy a session file but that is a manual operation that has to be done carefully and is easily forgotten when connecting to a new router)
- possibility to store the session file on the router instead of on the local computer
(maybe separate for each user)
- an "autosave in disconnect" checkmark that saves the session when the connection is abruptly terminated (of course not possible when session saved on router)
Last edited by pe1chl on Thu Sep 10, 2020 1:35 pm, edited 1 time in total.
 
bda
Member Candidate
Member Candidate
Posts: 185
Joined: Fri Sep 03, 2010 11:07 am
Location: Russia,Moscow

Re: WinBox v3.27 released!

Thu Sep 10, 2020 1:19 pm

Hi,
Strange problem in winbox 3.27 with CRS switches with software version 6.44.6 (best stable for now).
If adding vlan in switch window - all records become red, if they are wrong. But they are correct...

Upd: Winbox 3.25 and earlier has no this "red-vlan" problem.
Last edited by bda on Wed Sep 23, 2020 9:40 am, edited 2 times in total.
God bless UNIX!
 
User avatar
osc86
Member Candidate
Member Candidate
Posts: 108
Joined: Wed Aug 09, 2017 1:15 pm

Re: WinBox v3.27 released!

Thu Sep 10, 2020 1:22 pm

pe1chl, you are right. I downloaded an earlier Version of Winbox and it behaves the same.
I really thought this would open a new Winbox window, like when you start winbox.exe.
Sorry for that.
 
dnordenberg
newbie
Posts: 43
Joined: Wed Feb 24, 2016 8:00 pm

Re: WinBox v3.27 released!

Mon Sep 14, 2020 12:16 am

Not a new bug and don't know if it counts as a bug either or just a minor display deficiency but if you view packets during a packet dump you only see a empty line for every captured packet. You have have to stop the capture for them to fully display all columns of info.
 
LynxChaus
newbie
Posts: 29
Joined: Tue Jul 08, 2014 2:24 pm

Re: WinBox v3.27 released!

Mon Sep 14, 2020 12:28 am

You have have to stop the capture for them to fully display all columns of info.
Press F5 in packet window.
 
owsugde
newbie
Posts: 34
Joined: Thu Oct 06, 2016 5:01 pm

Re: WinBox v3.27 released!

Thu Sep 17, 2020 12:47 pm

Firewall and Bridge Filter rules lists are still misbehaving. As long as a rule detail window is open, the list itself will not let you drag and drop rules properly. When you're dragging a rule, it jumps to the very bottom of the list every second (on each window refresh). It seems to only happen when a rule is opened somewhere, at least for me.

I'm writing "still" because I've read this problem somewhere else already a while ago and it doesn't seem to be new with v3.27.

This behavior is quite dangerous, as some accept rule might "slip" below a drop rule and you lose connection to the router, so that you can't take it back.
 
User avatar
Cha0s
Forum Guru
Forum Guru
Posts: 1026
Joined: Tue Oct 11, 2005 4:53 pm

Re: WinBox v3.27 released!

Thu Sep 17, 2020 3:22 pm

Firewall and Bridge Filter rules lists are still misbehaving. As long as a rule detail window is open, the list itself will not let you drag and drop rules properly. When you're dragging a rule, it jumps to the very bottom of the list every second (on each window refresh). It seems to only happen when a rule is opened somewhere, at least for me.

I'm writing "still" because I've read this problem somewhere else already a while ago and it doesn't seem to be new with v3.27.

This behavior is quite dangerous, as some accept rule might "slip" below a drop rule and you lose connection to the router, so that you can't take it back.
The other day I was using Winbox on a colleague's PC and I noticed that there it didn't exhibit this behavior.
I don't know if it's something on the local PC that causes it, or something about the number of rules on the router.

I can see why MikroTik might ignore this. It's not reproducible 100%.
But the issue IS there for us that are affected. Until it is fixed, as you said, it's dangerous and practically not usable.
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Thu Sep 17, 2020 4:18 pm

I have submitted that to support including a screen capture movie of the problem. They are aware of the problem, hopefully a fix is coming.
For me it appeared to be solved but it again came back. To test if a new version is affected, I try to drag the column width in such a screen.
When the problem is present, that results in erratic column width, which is at least not as dangerous as erratic movement of firewall rules!
IMHO the following is required to reproduce the behavior:
- a table with quite some entries (firewall with > 200 rules, large connection table)
- frequent updates (busy router where counters in the firewall or connection table are updating all the time)
- holding down mouse button long enough so that updates come in that have to be displayed

I think it would be (for other reasons as well) worthwile to have the possibility to pause the updates (e.g. a pause button alongside "Safe mode")
or at least to be able to configure the update interval so instead of around once per seconds it can be set to like 15, 30, 60 seconds or so.
This is also very helpful when configuring a router via a slow link or from a slow machine, or e.g. via vnc or teamviewer.
 
owsugde
newbie
Posts: 34
Joined: Thu Oct 06, 2016 5:01 pm

Re: WinBox v3.27 released!

Fri Sep 18, 2020 9:45 am

- a table with quite some entries (firewall with > 200 rules, large connection table)
- frequent updates (busy router where counters in the firewall or connection table are updating all the time)
- holding down mouse button long enough so that updates come in that have to be displayed
I think that is roughly correct. It's definitely load-dependent in some way. My simpler setups don't have this at all. The biggest ones do, as soon as many windows are open with a lot of updates going on and also a rule details window. Then it starts jumping. Still not 100% reliably though.

Might make a capture myself in the next days, if I can make time and get some decent software for that.
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Fri Sep 18, 2020 11:28 am

Might make a capture myself in the next days, if I can make time and get some decent software for that.
I used Kazam and I ran into the problem that when trying to demo it with column-width dragging the framerate was too low and most of the jumps were not showing in the captured video...
I don't know if other software exists that can set the framerate of the capture, that would be preferable for this issue.
 
Znevna
Member Candidate
Member Candidate
Posts: 150
Joined: Mon Sep 23, 2019 1:04 pm

Re: WinBox v3.27 released!

Sat Sep 19, 2020 8:41 pm

Bug(?) (3.15 -> current): make any changes to an opened window (just moving it is enough) save session, close that window to which you've made changes. try to open that window again -> winbox session crashes.

LE: I couldn't test with releases older than 3.15 because of the protocol changes or whatever, the "issue" might be older.
Last edited by Znevna on Sat Sep 19, 2020 9:13 pm, edited 1 time in total.
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Sat Sep 19, 2020 8:50 pm

Bug(?) (3.15 -> current): make any changes to an opened window (just moving it is enough) save session, close that window to which you've made changes. try to open that window again -> winbox session crashes.
Thanks for explaining how that happens! It has happened many times to me that winbox crashed when I closed and re-opened a window, but it never occurred to me that the save of the session (which I irregularly do because of the lack of a "save on disconnect" flag) is the thing that triggers it!
 
User avatar
osc86
Member Candidate
Member Candidate
Posts: 108
Joined: Wed Aug 09, 2017 1:15 pm

Re: WinBox v3.27 released!

Mon Sep 21, 2020 8:11 pm

Bridge -> VLANs -> +
Default Value for VLAN IDs is invalid. Happens with latest ROS stable and beta, so this might be a winbox issue.
Screenshot_20200921_190339.png
You do not have the required permissions to view the files attached to this post.
 
Znevna
Member Candidate
Member Candidate
Posts: 150
Joined: Mon Sep 23, 2019 1:04 pm

Re: WinBox v3.27 released!

Mon Sep 21, 2020 8:20 pm

It is indeed a WinBox bug, checked with 3.24 and it doesn't happen, it started with 3.25.
 
User avatar
k6ccc
Long time Member
Long time Member
Posts: 604
Joined: Fri May 13, 2016 12:01 am
Location: Glendora, CA, USA (near Los Angeles)

Re: WinBox v3.27 released!

Mon Sep 21, 2020 11:52 pm

I can confirm it as well in 3.27 64 bit version. However, you are going to need to put something in that field regardless of what defaults there, so this is not really much of an issue.
Note that this is on the Bridge VLAN page as shows above and not the interface VLAN page (where the default is 1 - which you will almost always need to change as well). I had to hunt for this one for a second or two as I don't use a bridge on any of my MT routers...
RB750Gr3, RB750r2, CRS326-24G-2S (in SwitchOS), CSS326-24G-2S, CSS106-5G-1S, RB260GS
Not sure if I beat them in submission, or they beat me into submission

Warning: I know enough to be dangerous...

Jim
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Tue Sep 22, 2020 12:13 am

Also note that VLAN 0 is still rejected in v7 even though that is a valid value. Maybe not on a bridge but certainly on an ethernet interface.
When VLAN 0 is not going to be implemented there should be some flag that allows you to push an 802.1q tag with the current priority e.g. as an interface- or port setting.
 
mkx
Forum Guru
Forum Guru
Posts: 5018
Joined: Thu Mar 03, 2016 10:23 pm

Re: WinBox v3.27 released!

Tue Sep 22, 2020 7:43 am

Also note that VLAN 0 is still rejected in v7 even though that is a valid value. ....
When VLAN 0 is not going to be implemented there should be some flag that allows you to push an 802.1q tag with the current priority e.g. as an interface- or port setting.
0 is not a valid value to be set as VLAN ID for any interface (neither is 4095), it is only valid in 802.1q tag where only priority flags are set. So indeed there should be some easy way to set 802.1q priorities ...
BR,
Metod
 
oskarsk
MikroTik Support
MikroTik Support
Posts: 23
Joined: Mon May 13, 2019 9:41 am

Re: WinBox v3.27 released!

Tue Sep 22, 2020 8:05 am

We have managed to reproduce the issue with the incorrect default VLAN IDs and the WinBox crash after session save. Thanks for your reports this will be fixed in upcoming versions.
 
User avatar
mikahawkins
just joined
Posts: 6
Joined: Fri Sep 18, 2020 11:30 am
Location: Canada

Re: WinBox v3.27 released!

Wed Sep 23, 2020 8:36 am

Hey oskarsk,
You can go through those,
What's happening in v3.24:
1) fixed WinBox crash when seeing firewall rule with src/dst-address-type designed;
2) fixed checkbox bunch debilitated state legacy;
3) fixed dates and times in interface connect up/down properties (RouterOS v6.47 required);
4) fixed framework remark message show;
5) fixed vertical textual style arrangement in discretionary fields;
6) fixed window size legacy from the past meeting;
7) keep progressed and straightforward mode table settings independently;
8) make WinBox update work with wine 5.0 or more current;
9) appropriately show popup windows on top;

Regards,
Mika Hawkins.
Mika Hawkins
 
Hoxiv
just joined
Posts: 1
Joined: Wed Sep 23, 2020 4:43 pm

Re: WinBox v3.27 released!

Wed Sep 23, 2020 4:58 pm

Hi
For I long time I have been waiting for Winbox window size issue resolution. I saw that they said they have fixed something in v3.22 but the annoying problem still present. I don't know how to reproduce it, because it happens from time to time. In short, sometimes when I reconnect to the same session the main Winbox size get smaller and all the windows within get smaller too, according the main window. It's very annoying because I have to rearrange internal windows every time. I wish, it didn't change its size and keep the size it has when I press the connect button.

Does anybody have the same problem?
 
icedblind
just joined
Posts: 10
Joined: Fri Jun 22, 2012 10:56 am

About windows' resizing

Fri Sep 25, 2020 4:38 pm

I've noticed an annoying behaviour when resizing winbox's window, the inner dialog windows don't follow the main window size.
This happens since 3.25 winbox version to current 3.27 (32 or 64bit under Windows 8.1); from 3.24 and below everything works as expected.

Steps to reproduce:

- open winbox and connect to a mikrotik host, don't full-screen/resize the main winbox's window
- click any menu item to open its dialog window (interfaces, log, new terminal...)
- double click on the blue dialog window's header to extend the dialog to use all the main winbox gray space
- now double click on the winbox main window's header to extend the winbox's window to full screen
-> notice that the inner window hasn't extended to fullfill the main gray winbox space
- double click on the blue window's header again: you'll expect it goes to fullfill the winbox main grey space, instead it shrinks a bit to the start dialog window's dimensions
- double click again on the blue window's header: finally the window use the full available space

Similar behaviour happens when returning to non-full-screen main winbox window: the dialog windows still have the full width and height dimensions, and you need to resize them accordingly to the new main window dimensions.
The same behaviour happens when *resizing* the main winbox windows, instead of full screen.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8488
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: WinBox v3.27 released!

Tue Sep 29, 2020 1:54 pm

8) make WinBox update work with wine 5.0 or more current;
Works on MacOS, for example :)
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
a1x0
just joined
Posts: 3
Joined: Wed Nov 13, 2013 9:17 pm

Re: WinBox v3.27 released!

Fri Oct 02, 2020 1:19 pm

The latest Winbox versions do not save settings such as "Inline comments" and "Hide Passwords".
 
User avatar
vecernik87
Forum Veteran
Forum Veteran
Posts: 770
Joined: Fri Nov 10, 2017 8:19 am

Re: WinBox v3.27 released!

Tue Oct 13, 2020 3:16 am

The latest Winbox versions do not save settings such as "Inline comments" and "Hide Passwords".
Yes it does. I just tested both switches and it works.
Screenshot 2020-10-13 111156.png
This is from latest winbox v3.27 (unfortunately it does not show the version in the open window)
You do not have the required permissions to view the files attached to this post.
 
hatred
just joined
Posts: 18
Joined: Tue Sep 01, 2015 10:23 pm
Location: Belarus, Minsk

Re: WinBox v3.27 released!

Wed Oct 14, 2020 2:24 pm

Hello.
Today I've tried to download a backup file from my router via winbox (3.27 x64, ROS 6.48b40), but after selecting output dir nothing happens.
There is no such problem a week ago. I've tried also to download files via winbox from another PC with the same result. Additionally, I've successfully downloaded this files via webfig.
Should I create a ticket with supout?
UPD: Lol, after creating supout file I can download files via winbox again. WTF?
 
jebz
Member
Member
Posts: 324
Joined: Sun May 01, 2011 12:03 pm
Location: Australia

Re: WinBox v3.27 released!

Thu Oct 15, 2020 2:37 am

Fields missing from /System/disks . Free field showing 0B.
Tried on RB1100AHx4DE and ESXi virtual router with extra data virtual disk, both ROS v6.45.9
 
helipos
Member Candidate
Member Candidate
Posts: 113
Joined: Sat Jun 25, 2016 11:32 am

Re: WinBox v3.27 released!

Fri Oct 16, 2020 1:40 am

Pasting more than approximately 65000 characters in the Terminal of Winbox also crashes the Terminal. That is in the to be fixed list as well in case someone was wondering.
 
antonme
just joined
Posts: 1
Joined: Wed Jan 08, 2020 1:07 pm

Re: WinBox v3.27 released!

Fri Oct 16, 2020 4:14 am

*) support Ctrl++ & Ctrl+- on keypad for quick access to Zoom In/Zoom Out;
Please, support higher resolutions than 192dpi. The maximum zoom size is still way too small for some monitors.
For example, Macbook Pro 16 have a resolution of 226dpi, iMac 218dpi, MacBook pro 13/air - 227dpi.

One or two steps would be much better. E.g., 226 and 244 dpi, or maybe even one more of 288 or something like that.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24749
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: WinBox v3.27 released!

Fri Oct 16, 2020 11:37 am

Winbox looks great on macbook screens without any zoom. Are your macOS screen settings correct?
No answer to your question? How to write posts
 
lilw
newbie
Posts: 36
Joined: Sun Jan 21, 2018 5:31 pm

Re: WinBox v3.27 released!

Mon Oct 19, 2020 5:56 pm

It has been a long time I didn't update winbox from v3.24. Today I updated winbox to latest and find out that the disk item won't show USB drive plugs in my hap ac2. I reinstall the winbox v 3.24 it reappears again. Apparently it is v3.27 bugs. And there is one more thing I really don't get it that in File list. It have some default folder but it always stated that it created from 1970 even the flash drive I have just pluged in and reformat. Also my router auto created disk2 everytime I reboot the router. Is it normal or something happens?
 
User avatar
Smoerrebroed
just joined
Posts: 22
Joined: Mon Feb 12, 2018 10:21 am

Re: WinBox v3.27 released!

Mon Oct 19, 2020 6:21 pm

It's normal. Looks like that folder is created/touched before the time is synchronized.
 
jo2jo
Forum Veteran
Forum Veteran
Posts: 980
Joined: Fri May 26, 2006 1:25 am

Re: WinBox v3.27 released!

Tue Nov 03, 2020 6:47 pm

I understand that as of a few winbox versions ago , the entries in the log window were truncated to not take up more than a single line (and there were some users requesting this). however im not clear on how this is a better solution than the prior multi line log window entries (where you could always read the full log message).

perhaps a happy medium would be to add a horizontal scroll bar to the log window (and the ability to extend the column for MSG to length=(length of longest log entry))

IE i was on a 1080p display laptop trying to troubleshoot an issue, however i was unable to read this log entry (ie no way to read all of it, as i cant expand the column beyond the window, and i cant expand the window beyond the max res of winbox/monitor):
(see screenshot below)
MT log winbox Capture.JPG

am i missing something maybe?
thanks
You do not have the required permissions to view the files attached to this post.
:beep :beep :beep
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8488
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: WinBox v3.27 released!

Tue Nov 03, 2020 10:52 pm

am i missing something maybe?
Yeah, just double-click it - it will be opened in separate window :D
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
Sob
Forum Guru
Forum Guru
Posts: 6260
Joined: Mon Apr 20, 2009 9:11 pm

Re: WinBox v3.27 released!

Tue Nov 03, 2020 10:56 pm

That will still have one long line, but at least you can drag that window until you see it all. So it's a way, but definitely not good way, just slighly better than nothing. It would be best to optionally support both horizontal scrolling and line wrapping.
People who quote full posts should be spanked with ethernet cable. Some exceptions for multi-topic threads may apply. Not intended as incentive for masochists.
 
msatter
Forum Guru
Forum Guru
Posts: 1968
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: WinBox v3.27 released!

Wed Nov 04, 2020 12:18 am

That will still have one long line, but at least you can drag that window until you see it all. So it's a way, but definitely not good way, just slighly better than nothing. It would be best to optionally support both horizontal scrolling and line wrapping.
On scripts, I don't remember where, if you hover with the mouse pointer and it will open a box with a yellow background displaying the whole content of that script. That could be implemented also for the log and will trigger if the line is longer than the box displaying it.

Now you can already copy the content of that line and display it an external program/editor.
One RB4011 (cooled) and a RB760iGS (hEX S) in series. The 4011 Does PPPoE/IKEv2.
The cooler: viewtopic.php?f=3&t=138613&start=300#p799879
Running:
RouterOS 6.48beta58 / Winbox 3.27 64bits / MikroTik APP 1.3.15
 
Sob
Forum Guru
Forum Guru
Posts: 6260
Joined: Mon Apr 20, 2009 9:11 pm

Re: WinBox v3.27 released!

Wed Nov 04, 2020 1:02 am

IMHO the best solution is support for line wrapping. It's log, you should be able to quickly see what's there. Copying and pasting elsewhere is not good enough. Even scrolling is not great.

Btw, horizontal scrolling in log window already exists, I've seen it just now, I was able to see whole line, three times longer than screen width. But it's not there by default and you need to trick the window to get it. Make the Message column as wide as possible. Then shrink the log window and you'll get scrollbar. In this state you'll be able to widen Message column even more. And it will stay wide even when you expand log window to maximum width.
People who quote full posts should be spanked with ethernet cable. Some exceptions for multi-topic threads may apply. Not intended as incentive for masochists.
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Wed Nov 04, 2020 10:40 am

IMO the message column of the log window should always have "infinite" width so you can immediately see as much of the message as possible in your window size, and scroll to see more if necessary.
It looks so dumb to have this log window come up with the narrow truncated message column and then a lot of empty space to the right...
Same should be true for all other windows that have a comment column. Just make it extend infinitely to the right.
 
pe1chl
Forum Guru
Forum Guru
Posts: 7050
Joined: Mon Jun 08, 2015 12:09 pm

Re: WinBox v3.27 released!

Wed Nov 04, 2020 4:33 pm

Feature request: please save the settings of the Torch window (entry timeout, collect checkmarks, filters) in the saved session so it comes up with previous settings when re-opened.
 
w0lt
Long time Member
Long time Member
Posts: 506
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: WinBox v3.27 released!

Wed Nov 04, 2020 4:54 pm

Feature request: please save the settings of the Torch window (entry timeout, collect checkmarks, filters) in the saved session so it comes up with previous settings when re-opened.
I'll second that one !!!
MTCNA - 2011

" The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten "

Image
 
msatter
Forum Guru
Forum Guru
Posts: 1968
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: WinBox v3.27 released!

Thu Nov 19, 2020 10:48 am

I understand that as of a few winbox versions ago , the entries in the log window were truncated to not take up more than a single line (and there were some users requesting this). however im not clear on how this is a better solution than the prior multi line log window entries (where you could always read the full log message).

perhaps a happy medium would be to add a horizontal scroll bar to the log window (and the ability to extend the column for MSG to length=(length of longest log entry))

IE i was on a 1080p display laptop trying to troubleshoot an issue, however i was unable to read this log entry (ie no way to read all of it, as i cant expand the column beyond the window, and i cant expand the window beyond the max res of winbox/monitor):

am i missing something maybe?
thanks
In Terminal you can also display the log and long lines are then a bit easier to read:
/log print where time~"nov/18 08:53:06"
Thanks to the "~" you can also provide a partly search string like "53:06" or "nov/18".
One RB4011 (cooled) and a RB760iGS (hEX S) in series. The 4011 Does PPPoE/IKEv2.
The cooler: viewtopic.php?f=3&t=138613&start=300#p799879
Running:
RouterOS 6.48beta58 / Winbox 3.27 64bits / MikroTik APP 1.3.15

Who is online

Users browsing this forum: grusu and 9 guests