Community discussions

MikroTik App
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

RouterOS v6.27 released

Wed Feb 11, 2015 4:08 pm

What's new in 6.27 (2015-Feb-11 13:24):

*) console - added 'comment' parameter for '/system script'
*) api - return sentences can have property ".section" that groups values
from commands such as "monitor", "traceroute",
"print" (with non-zero 'interval' value);
*) cloud - add time zone detection feature "/system clock time-zone-autodetect";
*) cloud - rename "/ip cloud enabled" to "/ip cloud ddns-enabled";
*) cloud - make "/ip cloud update-time" independent from "/ip cloud ddns-enabled"
*) cloud - when setting "/ip cloud ddns-enabled" to "no" router will send
message to server to disable DNS name for this routerboard;
*) cloud - "/ip cloud force-update" command now will work also when
"/ip cloud ddns-enabled = no". usefull if user wants to disable DDNS;
*) RB4xxGL - improved ethernet throughput (less dropped packets);
*) RouterBOARD - fixed health reporting;
*) check-installation: fixed wrong kernel crc on powerpc boards
*) watchdog: fix software watchdog for x86
*) ssh - check conn state before sending disconnect message;
*) ipsec - fixed crash that happened in specific situation;
 
bommi
newbie
Posts: 26
Joined: Fri Jan 24, 2014 9:13 am
Location: Germany
Contact:

Re: RouterOS v6.27 released

Wed Feb 11, 2015 5:00 pm

What's new in 6.27 (2015-Feb-11 13:24):
*) ipsec - fixed crash that happened in specific situation;
In what specific situation?

I try to setup an IPSec IPv4-over-IPv6 VPN between Mikrotik and Juniper ScreenOS.
The Mikrotik Device crashes when trying to establish Phase 2.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Wed Feb 11, 2015 5:12 pm

Oh. This was unexpectedly fast release.
 
Ljubo
just joined
Posts: 21
Joined: Thu Apr 24, 2014 10:57 am

Re: RouterOS v6.27 released

Wed Feb 11, 2015 5:16 pm

Again the same after upgrade from 6.26 to 6.27 DHCP doesn’t work.
DHCP.JPG
You do not have the required permissions to view the files attached to this post.
 
rpingar
Long time Member
Long time Member
Posts: 592
Joined: Fri May 28, 2004 2:46 pm
Location: Italy

Re: RouterOS v6.27 released

Wed Feb 11, 2015 5:17 pm

Normis,
what about Ticket#2014122166000217
(When the number of PPPoE sessions on the device becomes more 1000 - when you turn off the one PPPoE session on all other sessions observed packet loss)

thanks
Ros
 
uldis
MikroTik Support
MikroTik Support
Posts: 3446
Joined: Mon May 31, 2004 2:55 pm

Re: RouterOS v6.27 released

Wed Feb 11, 2015 5:56 pm

Again the same after upgrade from 6.26 to 6.27 DHCP doesn’t work.
DHCP.JPG
Please make a support output file when you see this problem and report to support@mikrotik.com
 
tvrebac
Trainer
Trainer
Posts: 8
Joined: Wed Feb 11, 2015 6:58 pm

Re: RouterOS v6.27 released

Wed Feb 11, 2015 7:05 pm

RouterOS auto upgrade script is broken, there is no more "current-version" and "latest-version" properties in "/system package update".
Also if you issue "/system package check-for-updates without-paging" output will never stop.
If you issue "/system package update check-for-updates without-paging once" the output is this:

current-version: 6.27
status: resolving upgrade.mikrotik.com
 
DjM
Member Candidate
Member Candidate
Posts: 114
Joined: Sun Dec 27, 2009 2:44 pm

Re: RouterOS v6.27 released

Wed Feb 11, 2015 7:46 pm

Hello community,

results after quick test:

1) SSTP stop working
- RB (RB2011UAS-2HnD, firmware 3.19) is not able to connect to SSTP server 6.25 (RB750)
- SSTP clients 6.25 (RB750, RB951-2n) are not able to connect to 6.27 SSTP server (RB2011UAS-2HnD)
- in /tool profile there are CPU peaks (80%) for "ssl", in time-period 10s the peaks are 2-3 times for around 1s (probably SSTP client attempts to connect)
- after downgrade to 6.25 everything is working fine

2) Set script variable via SMS
- still not working, http://forum.mikrotik.com/viewtopic.php?t=58934
Last edited by DjM on Wed Feb 11, 2015 7:56 pm, edited 1 time in total.
 
User avatar
boen_robot
Forum Guru
Forum Guru
Posts: 2400
Joined: Thu Aug 31, 2006 4:43 pm
Location: europe://Bulgaria/Plovdiv

Re: RouterOS v6.27 released

Wed Feb 11, 2015 8:27 pm

*) api - return sentences can have property ".section" that groups values
from commands such as "monitor", "traceroute",
"print" (with non-zero 'interval' value);
I didn't even know monitor-traffic could monitor multiple interfaces at once... Awesome! Big win for API application efficiency here :D .
 
Ljubo
just joined
Posts: 21
Joined: Thu Apr 24, 2014 10:57 am

Re: RouterOS v6.27 released

Wed Feb 11, 2015 9:08 pm

Again the same after upgrade from 6.26 to 6.27 DHCP doesn’t work.
DHCP.JPG
Please make a support output file when you see this problem and report to support@mikrotik.com
Already done.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: RouterOS v6.27 released

Thu Feb 12, 2015 7:55 am

Again the same after upgrade from 6.26 to 6.27 DHCP doesn’t work.
DHCP.JPG
is ether1 in the bridge?? if yes you need to move DHCP to Bridge, it doesn't work on bridge ports.
Before (RouterOS v5 ) it was invisibly moved to master bridge interface anyways.

But "comment error" like in firewall would be nice any ways ;)
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: RouterOS v6.27 released

Thu Feb 12, 2015 8:03 am

RouterOS auto upgrade script is broken, there is no more "current-version" and "latest-version" properties in "/system package update".
Also if you issue "/system package check-for-updates without-paging" output will never stop.
If you issue "/system package update check-for-updates without-paging once" the output is this:

current-version: 6.27
status: resolving upgrade.mikrotik.com

Sounds like you have DNS/connection problems, i am upgrading all boards like that since this feature came out.
But i have also observed that check-for-update, if unsuccessful, never stops, it will try until successful...
Last edited by macgaiver on Thu Feb 12, 2015 8:29 am, edited 1 time in total.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: RouterOS v6.27 released

Thu Feb 12, 2015 8:24 am

Hello community,

results after quick test:

1) SSTP stop working
- RB (RB2011UAS-2HnD, firmware 3.19) is not able to connect to SSTP server 6.25 (RB750)
- SSTP clients 6.25 (RB750, RB951-2n) are not able to connect to 6.27 SSTP server (RB2011UAS-2HnD)
- in /tool profile there are CPU peaks (80%) for "ssl", in time-period 10s the peaks are 2-3 times for around 1s (probably SSTP client attempts to connect)
- after downgrade to 6.25 everything is working fine
FYI v6.25 was the problematic version for me. I even reported that to support. I was fixed in v6.26
Make sure that you have both ends of the tunnel with latest version.
I just upgraded both ends of my SSTP tunnels tp 6.27 - all is working as expected
 
Ljubo
just joined
Posts: 21
Joined: Thu Apr 24, 2014 10:57 am

Re: RouterOS v6.27 released

Thu Feb 12, 2015 9:05 am

Again the same after upgrade from 6.26 to 6.27 DHCP doesn’t work.
DHCP.JPG
is ether1 in the bridge?? if yes you need to move DHCP to Bridge, it doesn't work on bridge ports.
Before (RouterOS v5 ) it was invisibly moved to master bridge interface anyways.

But "comment error" like in firewall would be nice any ways ;)

Yes you are right but, but it was not enough to switch to the bridge.
I had to delete the bridge and re-create it then it worked.
Thank you.
 
netwpl
newbie
Posts: 27
Joined: Fri Jun 22, 2012 8:09 pm

Re: RouterOS v6.27 released

Thu Feb 12, 2015 9:50 am

Unbenannt.JPG
system health does not work..
You do not have the required permissions to view the files attached to this post.
 
DjM
Member Candidate
Member Candidate
Posts: 114
Joined: Sun Dec 27, 2009 2:44 pm

Re: RouterOS v6.27 released

Thu Feb 12, 2015 10:04 am

FYI v6.25 was the problematic version for me. I even reported that to support. I was fixed in v6.26
Make sure that you have both ends of the tunnel with latest version.
I just upgraded both ends of my SSTP tunnels tp 6.27 - all is working as expected
@macgaiver:
Thank you for hint, upgrade of both ends fixed the issue :-)
I was doing just a quick test so I have not tried this option and also I didn't have any issues with SSTP in 6.25 .

Unbenannt.JPG
system health does not work..
/system health print
This works for me on RB2011, ROS6.27, latest firmware.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2394
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: RouterOS v6.27 released

Thu Feb 12, 2015 10:11 am

system health does not work..
It is NOT bug. What do you want to see in system health?
RB951 don´t have voltage monitor and don´t have temperature monitor. http://routerboard.com/RB951G-2HnD
 
netwpl
newbie
Posts: 27
Joined: Fri Jun 22, 2012 8:09 pm

Re: RouterOS v6.27 released

Thu Feb 12, 2015 10:16 am

system health does not work..
It is NOT bug. What do you want to see in system health?
RB951 don´t have voltage monitor and don´t have temperature monitor. http://routerboard.com/RB951G-2HnD
doh! im sorry, my false!
 
User avatar
NathanA
Forum Veteran
Forum Veteran
Posts: 829
Joined: Tue Aug 03, 2004 9:01 am

Re: RouterOS v6.27 released

Thu Feb 12, 2015 10:45 am

Holy schnikes, 6.26 just came out last week!
*) cloud - add time zone detection feature "/system clock time-zone-autodetect";
How does this work exactly? IP address geolocation? The accuracy of that can be hit-and-miss. If it detects the wrong timezone, I assume we just report this to support?

-- Nathan
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2394
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re:

Thu Feb 12, 2015 11:37 am

Oh. This was unexpectedly fast release.
It is true. Mikrotik Support is there any known serious problem in 6.26?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Re:

Thu Feb 12, 2015 11:40 am

Oh. This was unexpectedly fast release.
It is true. Mikrotik Support is there any known serious problem in 6.26?
since there were no other big issues, we wanted to fix the health very badly :D
zero bugs left
 
User avatar
tomaskir
Trainer
Trainer
Posts: 1162
Joined: Sat Sep 24, 2011 2:32 pm
Location: Slovakia

Re: RouterOS v6.27 released

Thu Feb 12, 2015 11:55 am

Normis, can you please look at these:

Ticket#2014122966000079
Ticket#2014120866000733
Ticket#2015020266000252
 
tvrebac
Trainer
Trainer
Posts: 8
Joined: Wed Feb 11, 2015 6:58 pm

Re: RouterOS v6.27 released

Thu Feb 12, 2015 12:07 pm

RouterOS auto upgrade script is broken, there is no more "current-version" and "latest-version" properties in "/system package update".
Also if you issue "/system package check-for-updates without-paging" output will never stop.
If you issue "/system package update check-for-updates without-paging once" the output is this:

current-version: 6.27
status: resolving upgrade.mikrotik.com

Sounds like you have DNS/connection problems, i am upgrading all boards like that since this feature came out.
But i have also observed that check-for-update, if unsuccessful, never stops, it will try until successful...
It was working fine, upgrading from 6.25 -> 6.26 -> 6.27.

After "/system package update check-for-updates without-paging" I', getting following output (on several RBs, 951, 2011, 751)
current-version: 6.27
status: resolving upgrade.mikrotik.com

current-version: 6.27
latest-version: 6.27
status: System is already up to date

current-version: 6.27
latest-version: 6.27
status: System is already up to date ...... and so on

After "/system package update check-for-updates", first I get
current-version: 6.27
status: resolving upgrade.mikrotik.com
-- [Q quit|D dump|C-z pause]

then, after about 1,5 seconds i get:
current-version: 6.27
latest-version: 6.27
-- [Q quit|D dump|C-z pause]

Some of my RouterBoards are connected to the internet via PPPoE (direct connection to the ADSL modem), and some are behind internet router, but all of them are using working DNS servers (some of them are querying 8.8.8.8 and 8.8.4.4, some of them query local LAN cacheing DNS).

Regards
 
User avatar
NathanA
Forum Veteran
Forum Veteran
Posts: 829
Joined: Tue Aug 03, 2004 9:01 am

Re: Re:

Thu Feb 12, 2015 12:08 pm

zero bugs left
Image

You wish. :D

-- Nathan
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: Re:

Thu Feb 12, 2015 12:32 pm

zero bugs left
I wish it would be true.
 
DjM
Member Candidate
Member Candidate
Posts: 114
Joined: Sun Dec 27, 2009 2:44 pm

Re: Re:

Thu Feb 12, 2015 12:36 pm

Oh. This was unexpectedly fast release.
It is true. Mikrotik Support is there any known serious problem in 6.26?
since there were no other big issues, we wanted to fix the health very badly :D
zero bugs left
@normis:
What about setting variable in script via SMS - multiple year bug?

http://forum.mikrotik.com/viewtopic.php?f=9&t=58934
Multiple support tickets created for this bug.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Thu Feb 12, 2015 12:58 pm

Normis, can you please look at these:

Ticket#2014122966000079
Ticket#2014120866000733
Ticket#2015020266000252
The first two are more feature requests than bugs. The latest is new, so not answered yet, but before our specialist has looked at it, it may be specific hardware problem or something else, not a bug for sure.
 
User avatar
tomaskir
Trainer
Trainer
Posts: 1162
Joined: Sat Sep 24, 2011 2:32 pm
Location: Slovakia

Re: RouterOS v6.27 released

Thu Feb 12, 2015 1:32 pm

Normis, can you please look at these:

Ticket#2014122966000079
Ticket#2014120866000733
Ticket#2015020266000252
The first two are more feature requests than bugs. The latest is new, so not answered yet, but before our specialist has looked at it, it may be specific hardware problem or something else, not a bug for sure.
Ticket#2014122966000079
This is a bug with the route table not being available over SNMP.
How is that a feature request?

Ticket#2014120866000733
This is a bug with VirtualAP showing inside SNMP Station Interface table (mtxrWlStatEntry)
How is that a feature request?

Ticket#2015020266000252
Random packet-loss and port-flapping.
Its an issue, whether hardware or software (yes, not strictly a bug).
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2394
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: RouterOS v6.27 released

Thu Feb 12, 2015 3:51 pm

Auto upgrade still offer latest version - 6.25. Why?
upgrade.jpg
You do not have the required permissions to view the files attached to this post.
 
User avatar
rmmccann
Member Candidate
Member Candidate
Posts: 182
Joined: Tue Sep 25, 2012 11:15 pm
Location: USA

Re: RouterOS v6.27 released

Thu Feb 12, 2015 5:06 pm

Can anyone comment if dynamic IPSec policies are being properly removed after disconnect/timeout in these newer versions?

See:
http://forum.mikrotik.com/viewtopic.php?f=2&t=82757
 
isaiservices
just joined
Posts: 4
Joined: Thu Feb 12, 2015 5:12 pm

Re: RouterOS v6.27 released

Thu Feb 12, 2015 5:19 pm

Hi ,

Im having a issue , I need to set up 25 new X86 boxes with RouterOS , having issue knowing what motherboards to get....your WIKI is VERY out of date , please can you provide a compatibility list...surely you want your client to know if your product would work?
Also does RouterOS work on SATA 6gb/s?
Does it work with Atheros GbE LAN chip (10/100/1000 Mbit)?
Is the Gigabyte GA-H77-DS3H board supported?

Thanks
 
User avatar
ufm
Member Candidate
Member Candidate
Posts: 103
Joined: Fri Nov 15, 2013 12:02 pm
Location: Ukraine

Re: RouterOS v6.27 released

Thu Feb 12, 2015 5:40 pm

Normis,
what about Ticket#2014122166000217
(When the number of PPPoE sessions on the device becomes more 1000 - when you turn off the one PPPoE session on all other sessions observed packet loss)

thanks
Ros
Mikrotik totally ignore this bug. I think after some time they will say - "It's not the bug. It's the feature".
 
Mendesvel
just joined
Posts: 17
Joined: Mon Feb 18, 2013 6:03 pm

Re: RouterOS v6.27 released

Thu Feb 12, 2015 8:17 pm

Normis,
what about Ticket#2014122166000217
(When the number of PPPoE sessions on the device becomes more 1000 - when you turn off the one PPPoE session on all other sessions observed packet loss)

thanks
Ros
Mikrotik totally ignore this bug. I think after some time they will say - "It's not the bug. It's the feature".
:) It will be more like... "your ppoe sessions loose packets when you turn off one of them in sign of mourning, it's not a bug it's a non-documented feature"
 
Sob
Forum Guru
Forum Guru
Posts: 9119
Joined: Mon Apr 20, 2009 9:11 pm

Re: Re:

Thu Feb 12, 2015 8:48 pm

since there were no other big issues, we wanted to fix the health very badly :D
zero bugs left
If you're out of big bugs, feel free to fix the smaller ones, like [Ticket#2014120466000688] (brokerless 6to4 is unusable starting from 6.20). I understand that it isn't a highest priority one, as the user base is probably small. On the other hand, it's been broken for almost half a year now. And in a way, it's a dream bug, it's reliably broken (on 6.27 too) and does not require any special effort to reproduce.
 
bad1
just joined
Posts: 3
Joined: Thu Feb 12, 2015 9:30 pm

Re: RouterOS v6.27 released

Thu Feb 12, 2015 9:41 pm

MikroTik 951G-2HnD.

RouterOS v6.23
Image
RouterOS v6.27
Image

Awesome improvement MikroTik! :D
 
PtDragon
Frequent Visitor
Frequent Visitor
Posts: 80
Joined: Sun Apr 26, 2009 8:52 pm

Re: RouterOS v6.27 released

Thu Feb 12, 2015 11:19 pm

MikroTik 951G-2HnD.

RouterOS v6.23
Image
RouterOS v6.27
Image

Awesome improvement MikroTik! :D
For me it works faster...
305mbit to 345mbit...
Are you sure your speedtest.net server gives full speed?
 
bad1
just joined
Posts: 3
Joined: Thu Feb 12, 2015 9:30 pm

Re: RouterOS v6.27 released

Thu Feb 12, 2015 11:51 pm

yes, I am sure. Downgrade back to RouterOS 6.23, full speed again with same speedtest.net server.
 
goughy000
just joined
Posts: 7
Joined: Fri Feb 13, 2015 12:06 am

Re: RouterOS v6.27 released

Fri Feb 13, 2015 12:08 am

What about Ticket#2015020466000267 ?

Constant reboots, was told it was a Winbox issue?? Upgraded to latest winbox 3RC4 and to v6.27 ROS, router still crashes once or twice per day (if twice, it's within a few minutes of each other)
 
michelsantos
just joined
Posts: 2
Joined: Fri Feb 06, 2015 12:50 pm
Location: Brazil
Contact:

Re: RouterOS v6.27 released

Fri Feb 13, 2015 2:42 am

Efetuei o upgrade para a versão 6.27 em uma RB 750 e o processamento foi as alturas, ficando entre 90 e 100%, chegando travar e reiniciar. O que fiz para sanar o problema foi: fazer o downgrade para a versão 6.25 e voltou tudo ao normal, o processamento fico entre 9 e 12%. Outro detalhe que reparei foi, algumas páginas abriam, outras não, conferi se era problema de DNS, troquei vários DNS e o problema persistiu.

Então por enquanto o que mantive a solução foi voltar a versão 6.25.
 
mitry
just joined
Posts: 23
Joined: Tue Jun 26, 2012 10:06 pm

Re: RouterOS v6.27 released

Fri Feb 13, 2015 7:46 am

This bug still not fixed in 6.27:
http://forum.mikrotik.com/viewtopic.php?f=2&t=92996
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1222
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: RouterOS v6.27 released

Fri Feb 13, 2015 8:00 am

On my OmniTIK UPA-5HnD I still get wrong health info on 6.27:

/system health> print
voltage: 21.8V
temperature: -23C

Now unless there's an efficient freezer inside this is wrong. Outside temp is -5...
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: RouterOS v6.27 released

Fri Feb 13, 2015 8:25 am

Auto upgrade still offer latest version - 6.25. Why?
upgrade.jpg
Most probably you have too old version to have this feature working :) I found v6.7 in my network from that it worked fine. So you most probably need to upgrade ... so that you can upgrade :)
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: RouterOS v6.27 released

Fri Feb 13, 2015 8:28 am

Hi ,

Im having a issue , I need to set up 25 new X86 boxes with RouterOS , having issue knowing what motherboards to get....your WIKI is VERY out of date , please can you provide a compatibility list...surely you want your client to know if your product would work?
Also does RouterOS work on SATA 6gb/s?
Does it work with Atheros GbE LAN chip (10/100/1000 Mbit)?
Is the Gigabyte GA-H77-DS3H board supported?

Thanks
RouterOS v6 uses Linux Kernel 3.3.5. , if that motherboard have drivers for that Linux Kernel - probably you are fine, but only way to find for sure is to actually try. I myself waiting to ROuterOS v7 only to get all the good driver stuff that will come with new Linux Kernel
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1764
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: Re:

Fri Feb 13, 2015 8:33 am

If you're out of big bugs, feel free to fix the smaller ones, like [Ticket#2014120466000688] (brokerless 6to4 is unusable starting from 6.20). I understand that it isn't a highest priority one, as the user base is probably small. On the other hand, it's been broken for almost half a year now. And in a way, it's a dream bug, it's reliably broken (on 6.27 too) and does not require any special effort to reproduce.
I'm pretty sure that 6to4 works, i use it a lot, maybe it is configuration error? or you have very very specific problems.if there would be mayor problem with 6to4 since 6.20 we would have s..t storm here in forum for sure. I suggest to open separate topic about this issue so we can give you a hand.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Feb 13, 2015 9:17 am

Normis,
what about Ticket#2014122166000217
(When the number of PPPoE sessions on the device becomes more 1000 - when you turn off the one PPPoE session on all other sessions observed packet loss)

thanks
Ros
Mikrotik totally ignore this bug. I think after some time they will say - "It's not the bug. It's the feature".
We already responded that this is not a bug that is easily fixable. This is one of fundamental flaws of the whole system, reason comes from kernel. If you have thousands of interfaces that are being listed, removing entries is very CPU intensive. We cannot fix it in RouterOS v6
 
andriys
Forum Guru
Forum Guru
Posts: 1526
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: RouterOS v6.27 released

Fri Feb 13, 2015 9:30 am

We already responded that this is not a bug that is easily fixable. This is one of fundamental flaws of the whole system, reason comes from kernel. If you have thousands of interfaces that are being listed, removing entries is very CPU intensive. We cannot fix it in RouterOS v6
I have a suggestion, though not sure it can be implemented. What if you add an option to just disable (and mark somehow) such interfaces instead of permanently deleting them from the list. And then reuse these interfaces for new PPPoE sessions later. Will this solve the original problem?
 
isaiservices
just joined
Posts: 4
Joined: Thu Feb 12, 2015 5:12 pm

Re: RouterOS v6.27 released

Fri Feb 13, 2015 9:49 am

does RouterOS work on SATA 6gb/s?
 
User avatar
paka
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jan 08, 2009 4:25 pm
Location: Bonn, Germany
Contact:

Re: RouterOS v6.27 released

Fri Feb 13, 2015 12:03 pm

Hi Normis,

system clock error in RouterOS v6.25 by x86!
It is synchronized with NTP-Servers unproblematic
But it works delayed in time (look on seconds).
we can't upgrade our live system to v6.27 to test it.

we have tested v6.25 in RouterOS v6.25 by mipsbe, it works

for your reply thank you in advance
Regards,
paka
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Feb 13, 2015 12:12 pm

Hi Normis,

system clock error in RouterOS v6.25 by x86!
It is synchronized with NTP-Servers unproblematic
But it works delayed in time (look on seconds).
we can't upgrade our live system to v6.27 to test it.

we have tested v6.25 in RouterOS v6.25 by mipsbe, it works

for your reply thank you in advance
Regards,
paka
please explain more, what is wrong with seconds ?
can you post some image, or other details about this ?
 
User avatar
paka
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jan 08, 2009 4:25 pm
Location: Bonn, Germany
Contact:

Re: RouterOS v6.27 released

Fri Feb 13, 2015 12:48 pm

Hi Normis,

system clock error in RouterOS v6.25 by x86!
It is synchronized with NTP-Servers unproblematic
But it works delayed in time (look on seconds).
we can't upgrade our live system to v6.27 to test it.

we have tested v6.25 in RouterOS v6.25 by mipsbe, it works

for your reply thank you in advance
Regards,
paka
please explain more, what is wrong with seconds ?
can you post some image, or other details about this ?
here i have attached gif image, that shows difference system takt time between mipsbe and x86
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Feb 13, 2015 1:06 pm

Maybe Winbox is slow to give updates beause your router is 100% CPU loaded? What is the cause of CPU load ?
 
isaiservices
just joined
Posts: 4
Joined: Thu Feb 12, 2015 5:12 pm

Re: RouterOS v6.27 released

Fri Feb 13, 2015 1:10 pm

does RouterOS work on SATA 6gb/s?
Just love how some questions just gets ignored.........
 
User avatar
paka
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jan 08, 2009 4:25 pm
Location: Bonn, Germany
Contact:

Re: RouterOS v6.27 released

Fri Feb 13, 2015 1:13 pm

Maybe Winbox is slow to give updates beause your router is 100% CPU loaded? What is the cause of CPU load ?

100 % CPU load is since we have upgraded from v6.6 to v6.22.
The cause for that is bug :)
see here http://forum.mikrotik.com/viewtopic.php?t=91468

in v6.22 we had not problem with system time
 
kristaps
Member Candidate
Member Candidate
Posts: 272
Joined: Mon Jan 27, 2014 1:37 pm

Re: RouterOS v6.27 released

Fri Feb 13, 2015 1:30 pm

does RouterOS work on SATA 6gb/s?
Just love how some questions just gets ignored.........

Yes it works with 6gb/s ports
in motherboard GA-Z77MX-D3H with kingston V300 ssd
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Feb 13, 2015 1:54 pm

Maybe Winbox is slow to give updates beause your router is 100% CPU loaded? What is the cause of CPU load ?

100 % CPU load is since we have upgraded from v6.6 to v6.22.
The cause for that is bug :)
see here http://forum.mikrotik.com/viewtopic.php?t=91468

in v6.22 we had not problem with system time
You say v6.22 but image shows v6.25, but this topic is actually about v6.27 ...
 
mars
Member Candidate
Member Candidate
Posts: 228
Joined: Sun Mar 14, 2010 1:43 pm

Re: RouterOS v6.27 released

Fri Feb 13, 2015 1:57 pm

we find that with the new ros versions after a day or two the ccq drops and the data across the links starts getting less till the router is rebooted then it is back to normal for the next two days
mostly we see this on the newer rbs
anybody else have this problem
 
und3ath
Frequent Visitor
Frequent Visitor
Posts: 62
Joined: Mon Mar 23, 2009 7:01 pm

Re: RouterOS v6.27 released

Fri Feb 13, 2015 2:14 pm

What about Nstreme? When will it be fixed? (not polled for too long disconnections)
 
User avatar
THG
Member
Member
Posts: 472
Joined: Thu Oct 15, 2009 1:05 am

Re: RouterOS v6.27 released

Fri Feb 13, 2015 2:30 pm

Is there any reasons not to fix this issue? As you can see in the picture, TCP traffic through the Ethernet interface shows over 80 percent more than the VLAN interface. UDP shows the correct speed on both interfaces and the issue appears only in the X86 version of RouterOS.
You do not have the required permissions to view the files attached to this post.
 
Sob
Forum Guru
Forum Guru
Posts: 9119
Joined: Mon Apr 20, 2009 9:11 pm

Re: Re:

Fri Feb 13, 2015 3:21 pm

I'm pretty sure that 6to4 works, i use it a lot, maybe it is configuration error? ...
It depends on what kind of 6to4 you use. If it's connection to tunnel broker (6to4 interface has remote-address set), then it works. But if it's the automatic kind (no remote-address for 6to4 interface, address derived from IPv4 in 2002::/16 range and default route with gateway ::192.88.99.1%<6to4_interface_name>), then it does not. This is complete config. Since then, they fixed the first problem ("hop limit exceeded" for 2002::/16) in 6.24. But the second one ("no route to host" for everything else) persists. Last reply ("we will look into it") from support is from 16th December, so I'm getting a little worried if the issue got lost in queue or something.
 
bronx
newbie
Posts: 39
Joined: Wed Feb 11, 2015 1:04 am
Location: Turin, Italy

Re: RouterOS v6.27 released

Fri Feb 13, 2015 3:45 pm

Hi Normis,

system clock error in RouterOS v6.25 by x86!
It is synchronized with NTP-Servers unproblematic
But it works delayed in time (look on seconds).
we can't upgrade our live system to v6.27 to test it.

we have tested v6.25 in RouterOS v6.25 by mipsbe, it works

for your reply thank you in advance
Regards,
paka
please explain more, what is wrong with seconds ?
can you post some image, or other details about this ?

Normis, but the same packet loss occurs when one pppoe reach keepalive-timeout or only if removed from shell/gui by administrator?
In order to understand if in this case is better to restart pppoe-client on the CPE.

The limit of 1000 pppoe it's valid on CCR1036 ?

Thank you
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Feb 13, 2015 4:15 pm

There is no limit, just on large numbers it takes a lot of resources, what happens then, depends on your CPU and number of clients
 
bronx
newbie
Posts: 39
Joined: Wed Feb 11, 2015 1:04 am
Location: Turin, Italy

Re: RouterOS v6.27 released

Fri Feb 13, 2015 4:18 pm

There is no limit, just on large numbers it takes a lot of resources, what happens then, depends on your CPU and number of clients
But keep-alive reached/CPE disconnect pppoe/Administrator remove ppppoe from server take the same CPU resources ?
 
User avatar
ufm
Member Candidate
Member Candidate
Posts: 103
Joined: Fri Nov 15, 2013 12:02 pm
Location: Ukraine

Re: RouterOS v6.27 released

Fri Feb 13, 2015 4:18 pm

what about Ticket#2014122166000217
We already responded that this is not a bug that is easily fixable. This is one of fundamental flaws of the whole system, reason comes from kernel. If you have thousands of interfaces that are being listed, removing entries is very CPU intensive. We cannot fix it in RouterOS v6
Nowhere in documentation or promotional materials not described this serious limitation.
Several times I asked - when the wait though, would be the beta v7? No answer.

Yes, we are small company from small country.
I really try not to swear.

But I very much hope that there will some big company вы.бет вас за такое поведение при помощи своих юристов - по полной программе.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Feb 13, 2015 4:34 pm

There is no limit, just on large numbers it takes a lot of resources, what happens then, depends on your CPU and number of clients
But keep-alive reached/CPE disconnect pppoe/Administrator remove ppppoe from server take the same CPU resources ?
In our test, the effect is very mild, not like Ufm describes, so I guess this is a question to him. We are still doing everything we can to repeat this problem, but so far, we are not successful.
 
User avatar
Kalpar
just joined
Posts: 8
Joined: Fri Feb 13, 2015 4:12 pm

Re: Re:

Fri Feb 13, 2015 4:35 pm

Oh. This was unexpectedly fast release.
It is true. Mikrotik Support is there any known serious problem in 6.26?
since there were no other big issues, we wanted to fix the health very badly :D
zero bugs left
Hello Normis,

Any chance that Support TicketID: 2014030666000236 will get fixed?
Router always looks in the main table when it has to send ICMP TTL exceeded in transit (type 11)

It is detailed at:
http://forum.mikrotik.com/viewtopic.php ... 00#p414018
and
http://forum.mikrotik.com/viewtopic.php ... 00#p413242

Thanks.
 
User avatar
noyo
Member Candidate
Member Candidate
Posts: 116
Joined: Sat Jan 28, 2012 12:25 am
Location: Mazury - Poland
Contact:

Re: RouterOS v6.27 released

Fri Feb 13, 2015 4:44 pm

is bug?
Polish shortcuts:
pl.png
English shortcuts
en.png
You do not have the required permissions to view the files attached to this post.
Last edited by noyo on Fri Feb 13, 2015 4:45 pm, edited 1 time in total.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Feb 13, 2015 4:45 pm

You have localized Windows version? Yes, RouterOS only understands settings in english.
 
User avatar
noyo
Member Candidate
Member Candidate
Posts: 116
Joined: Sat Jan 28, 2012 12:25 am
Location: Mazury - Poland
Contact:

Re: RouterOS v6.27 released

Fri Feb 13, 2015 4:49 pm

You have localized Windows version? Yes, RouterOS only understands settings in english.
Debian 7 + wine + winbox :)
That's what he sets RouterOS Polish?
 
galaxynet
Long time Member
Long time Member
Posts: 646
Joined: Fri Dec 17, 2004 2:52 pm
Contact:

Re: RouterOS v6.27 released

Fri Feb 13, 2015 8:22 pm

routerboard-6.27-mipsbe.npk - seems that this package is missing....

Both in the zip file for download on the 'download' page and via packages 'update' under ROS.....

Thom
 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 227
Joined: Tue Mar 08, 2011 2:52 am
Location: Lugano - Switzerland
Contact:

Re: RouterOS v6.27 released

Fri Feb 13, 2015 9:13 pm

routerboard-6.27-mipsbe.npk - seems that this package is missing....
There is no "routerboard" package in ROS v6, it is included into system.
 
galaxynet
Long time Member
Long time Member
Posts: 646
Joined: Fri Dec 17, 2004 2:52 pm
Contact:

Re: RouterOS v6.27 released

Fri Feb 13, 2015 9:16 pm

routerboard-6.27-mipsbe.npk - package missing is what ROS tells me from the Winbox /system packages download.

It is not I who is telling 'you' its missing, it's ROS telling me it's missing.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 2855
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: RouterOS v6.27 released

Fri Feb 13, 2015 10:15 pm

RB133C3 - Sytem/Packages/Check shows 6.27 available but version 6.xx bricks RB133C3.
Should be therefore 6.xx be reported to this router as upgrade ?
 
plentyofbug
just joined
Posts: 12
Joined: Thu Sep 18, 2014 1:22 am

Re: RouterOS v6.27 released

Fri Feb 13, 2015 10:17 pm

does RouterOS work on SATA 6gb/s?
Just love how some questions just gets ignored.........
No, routeros doesn't work on any new x86 system, especially Intel C202 or many many similar new chipsets, including Intel® i217LM + Intel® i210AT ethernet controllers family and so on...
 
Basdno
Member Candidate
Member Candidate
Posts: 119
Joined: Wed Feb 17, 2010 10:11 pm

Re: RouterOS v6.27 released

Sat Feb 14, 2015 12:58 am

does RouterOS work on SATA 6gb/s?
Just love how some questions just gets ignored.........

Maybe that is because you ask them in the totaly wrong thread?!
This is a thread about the latest release of RouterOS, and bugs/questions regarding that particular subject. Meaning the guys who come into this thread doesnt necesserily pay attention to off subject topics when they screen through the thread in look for answers.

Asking about what hardware to use would probably be best put in an OWN thread under f.ex. GENERAL or maybe even Hardware talk section, then you would probably have gotten straight to people interested and capable of replying fast to you.

I am not saying you cant get an answer here(clearly you did already anyway), just pointing out that it does matter WHERE you post your questions about different topics. And whining you arent getting any attention when in the wrong thread isnt the best way to go about it. ;)

This is not meant as criticism, only a well meant general advice!
Wish u all the best! :)

Cheers
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: RouterOS v6.27 released

Sat Feb 14, 2015 3:09 pm

Having three mipsbe routers connected to internet:

A: running SSTP server accepting SSTP conections from B and C
B: running SSTP server and client, connecting to A and accepting connections from C
C: running SSTP client and connecting to A and B

A had 6.25, B had 6.18, C had 6.25 and everything worked fine.

Decided to update A from 6.25 to 6.27. Result: Connection from B was fine. C was not able to establish connection.

Decided to update C from 6.25 to 6.27. Result: C is not able to establish connections both to A and B. The disk1 that was working in 6.25 was renamed to disk3 and new disk1 appeared – this should not happen!
And what is more: not running SSTP clients show incoming packets and data in interface overview. How to? Torch is blank…

Reverting both A and C to 6.25 and waiting a correction. After downgrade both A and C to 6.25 everything works correctly like before.

Supout was sent to support, ticket nr. [Ticket#2015021466000104]
 
galaxynet
Long time Member
Long time Member
Posts: 646
Joined: Fri Dec 17, 2004 2:52 pm
Contact:

Re: RouterOS v6.27 released

Sat Feb 14, 2015 4:07 pm

Well I was able to resolve my own issue. I was upgrading units from 5.26 to 6.27 and got this as an error:
"routerboard-6.27-mipsbe.npk - package missing " That is what package update is telling me when I tried downloading the latest update.

The solution was to upgrade to an earlier version of 6. In my case I used 6.17, once I upgraded to 6.17, the update/upgrade to 6.27 went fine.

Still - this should be fixed in 6.27. It should not be necessary to do intermediate upgrades from a mature ROS version to a newer 'mature' version. Just my two cents worth.

Paoloaga - just thowing out, ROS 6.27 doesn't have "routerboard-6.27-mipsbe.npk" is not an answer. I knew it didn't have it, I was looking for a solution to the upgrade issue.
 
ibm
Member
Member
Posts: 306
Joined: Mon May 12, 2014 5:16 pm

Re: RouterOS v6.27 released

Sat Feb 14, 2015 10:25 pm

I have a kernel failure and so a forced reboot on the routerboard pinged when I ping with a frame size of 1470 and more a pppoe client or a pppoe server address, the pppoe client and server interfaces run on a bridge in each rb in which I have an eoip tunnel that allow the L2 communications between the 2 devices. Both have 6.27 with latest firmware.
 
redbullsteve
just joined
Posts: 22
Joined: Wed Feb 02, 2011 12:37 am

Re: RouterOS v6.27 released

Mon Feb 16, 2015 7:01 am

Upgraded a few CCR1036-12G-4S to 6.27 and have seen BPG become very unstable, connected to 4 peers, session connects fine then randomly drops all peer sessions and reset between 4 hours and 10 mins.

Not sure what the cause is, nothing errors or looks incorrect, downgraded to 6.26 and BGP is stable again.

Could either be an issue with OSPF or BGP, very hard to tell.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Mon Feb 16, 2015 8:47 am

routerboard-6.27-mipsbe.npk - package missing is what ROS tells me from the Winbox /system packages download.

It is not I who is telling 'you' its missing, it's ROS telling me it's missing.
this is not the right command. "/system packages update check-for-updates" is the right command
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Mon Feb 16, 2015 8:48 am

RB133C3 - Sytem/Packages/Check shows 6.27 available but version 6.xx bricks RB133C3.
Should be therefore 6.xx be reported to this router as upgrade ?
You are right, that auto-upgrades shouldn't be shown to incompatible routers, but old RouterOS doesn't know about limitations of new RouterOS, and we can't simply tell old RouterOS some new instructions.

As you know, Download page states "RB111, RB112, RB133C, RB150 devices are not supported in v6, please use v5.", but yes, I agree, we need to think of some way to disable auto-upgrades for these devices.
 
zyzelis
Member Candidate
Member Candidate
Posts: 213
Joined: Sun Apr 08, 2012 9:25 pm

Re: RouterOS v6.27 released

Mon Feb 16, 2015 8:58 am

Upgraded a few CCR1036-12G-4S to 6.27 and have seen BPG become very unstable, connected to 4 peers, session connects fine then randomly drops all peer sessions and reset between 4 hours and 10 mins.

Not sure what the cause is, nothing errors or looks incorrect, downgraded to 6.26 and BGP is stable again.

Could either be an issue with OSPF or BGP, very hard to tell.
I have running CCR1036-12G-4S 3 days. bgp uptime equal to routers uptime. So You should check configs
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 2095
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:

Re: RouterOS v6.27 released

Mon Feb 16, 2015 10:12 am

Upgraded a few CCR1036-12G-4S to 6.27 and have seen BPG become very unstable, connected to 4 peers, session connects fine then randomly drops all peer sessions and reset between 4 hours and 10 mins.
We have the same router running 6.27 with 4 peers running OSPF, BGP, BFD, MPLS, VPLS, L3VPN with 9000+ byte MTU and holding around 60,000 routes via BGP.

It has been stable for 3 days now. Maybe your instability is something specific to your configuration. You may want to email support@mikrotik.com with more details so they can help you.
 
yozz
just joined
Posts: 15
Joined: Fri Jan 31, 2014 11:51 pm

Re: RouterOS v6.27 released

Mon Feb 16, 2015 11:17 am

script not work in 6.27

:foreach i in=[/ip firewall address-list find ] do={
:if ( [/ip firewall address-list get $i comment] = "OpenBL" ) do={
/ip firewall address-list remove $i
}
}
/import file-name=disk2/openbl.rsc;
:log info "Removal old openbl and add new";
/tool fetch url="http://joshaven.com/dshield.rsc" mode=http dst-path=disk2/dshield.rsc;
:log info "Downloaded dshield.rsc from Joshaven.com";
 
skibi82
newbie
Posts: 43
Joined: Fri Mar 22, 2013 7:09 pm

Re: RouterOS v6.27 released

Mon Feb 16, 2015 1:01 pm

And again, the same can not be imported and name of the certificate.
As I will now want it to be 100 certificates then i have totally fuck
Fairy where I have a certificate?

Maybe cert_42 can cert_23 wtf?
I have all displayed in the CLI and then look for

Great Improvement
dupa.png
You do not have the required permissions to view the files attached to this post.
 
DjM
Member Candidate
Member Candidate
Posts: 114
Joined: Sun Dec 27, 2009 2:44 pm

Re: Re:

Mon Feb 16, 2015 2:03 pm

Normis, MikroTik support team,

what is the reason of no-reply or no-answer to my question related to SMS bug, please?
@normis:
What about setting variable in script via SMS - multiple year bug?

http://forum.mikrotik.com/viewtopic.php?f=9&t=58934
Multiple support tickets created for this bug.
Thank you
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: Re:

Mon Feb 16, 2015 2:44 pm

DjM - Please try to do the following:

1) Delete your variable from "/system script environment";
2) Remove ":global myvar" definition from script and leave only log and beep functions.

It works for me like that.

Please let us know how it goes.
 
DjM
Member Candidate
Member Candidate
Posts: 114
Joined: Sun Dec 27, 2009 2:44 pm

Re: Re:

Mon Feb 16, 2015 5:06 pm

DjM - Please try to do the following:

1) Delete your variable from "/system script environment";
2) Remove ":global myvar" definition from script and leave only log and beep functions.

It works for me like that.

Please let us know how it goes.
Hello strods,

great, it is working. :-)

I can't believe that it takes years to get the hint that the variable shouldn't be declared as ":local" or ":global" in the script source, but it is great that it is working and we finally have found the solution :-) All related tickets can be closed, if they are still open.

Thank you for the hint.
 
ubikt23
just joined
Posts: 1
Joined: Tue Feb 17, 2015 12:39 am

Re: RouterOS v6.27 released

Tue Feb 17, 2015 12:46 am

What's new in 6.27 (2015-Feb-11 13:24):
*) ipsec - fixed crash that happened in specific situation;
In what specific situation?

I try to setup an IPSec IPv4-over-IPv6 VPN between Mikrotik and Juniper ScreenOS.
The Mikrotik Device crashes when trying to establish Phase 2.
me pasa lo mismo despues de actualizar el dhcp dejo de funcionar
 
deanMKD1
Member
Member
Posts: 366
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: RouterOS v6.27 released

Tue Feb 17, 2015 3:36 pm

@ubikt23 English please. We dont understand Spanish :D
 
User avatar
ndnet
just joined
Posts: 1
Joined: Tue Dec 09, 2014 8:27 pm
Location: Abuja

Re: RouterOS v6.27 released

Tue Feb 17, 2015 7:41 pm

How can I configure Mikrotik hotspot to allow IP Phones to make calls without authentication and computer connected to the other IP Phone Ethernet port to be authenticated?
I am a new user of Mikrotik and i love using it. Please any help will be appreciated.
This is the challenge am having using IP Phones in the office with Mikrotik 1100 as my server.
Thanks in advance.
 
pbr3000
Frequent Visitor
Frequent Visitor
Posts: 75
Joined: Fri Jan 08, 2010 7:31 am

Re: RouterOS v6.27 released

Tue Feb 17, 2015 8:24 pm

How can I configure Mikrotik hotspot to allow IP Phones to make calls without authentication and computer connected to the other IP Phone Ethernet port to be authenticated?
I am a new user of Mikrotik and i love using it. Please any help will be appreciated.
This is the challenge am having using IP Phones in the office with Mikrotik 1100 as my server.
Thanks in advance.
Maybe you should create a new topic because this one is specific for v6.27 and issues related to it. A good place to look is the wiki page. ;-)
 
TonyJeppesen
just joined
Posts: 1
Joined: Tue Feb 10, 2015 6:23 pm

Re: RouterOS v6.27 released

Tue Feb 17, 2015 10:00 pm

EoIP tunnels stopped working after 6.27 release... Any Ideas or other known issues with this upgrade like this. Simple EoIP just two routers connected to each other with public IPs any help would be greatly appreciated.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: RouterOS v6.27 released

Wed Feb 18, 2015 12:28 am

[offtop]
A week after 6.27 release, and no new RC builds... Seems like v7 is coming :) Or some Latvian holidays?..

P.S. To make this post completely off the topic: Normis, please hide that floating header on the forum, it just disturbs and nothing else...
[/offtop]
 
LaZyLion
newbie
Posts: 32
Joined: Fri May 09, 2014 10:27 am

Re: RouterOS v6.27 released

Wed Feb 18, 2015 12:51 am

RouterOS auto upgrade script is broken, there is no more "current-version" and "latest-version" properties in "/system package update".
I would like to re-iterate this issue.


In 6.26 we get:
[user@myrouter] /system package update> :put [get current-version ]
6.26
But in 6.27 we get:
[user@thisrouter] /system package update> :put [get current-version ]
input does not match any value of value-name
Same thing happens with "latest-version".

Using the question mark (?) we should be able to get a list of properties.
In 6.26 it works:
[user@myrouter] /system package update> :put [get value-name=?

ValueName ::= current-version | latest-version | status
But in 6.27, no properties are shown.
[user@thisrouter] /system package update> :put [get value-name=?

ValueName ::=
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Wed Feb 18, 2015 11:10 am

LaZyLion - Since 6.27 "/system package update check-for-updates" is dynamic and gives output to console. That has caused changes.

You can use command like this:
:put ([/system package update check-for-updates once as-value ] -> "current-version")
 
ibm
Member
Member
Posts: 306
Joined: Mon May 12, 2014 5:16 pm

Re: RouterOS v6.27 released

Wed Feb 18, 2015 11:15 am

Normis, please hide that floating header on the forum, it just disturbs and nothing else...
+1
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Wed Feb 18, 2015 11:25 am

Normis, please hide that floating header on the forum, it just disturbs and nothing else...
+1
easy to access "View Active Topics" without scrolling to top
 
ibm
Member
Member
Posts: 306
Joined: Mon May 12, 2014 5:16 pm

Re: RouterOS v6.27 released

Wed Feb 18, 2015 11:30 am

Normis, please hide that floating header on the forum, it just disturbs and nothing else...
+1
easy to access "View Active Topics" without scrolling to top
Yes, but the solution is simply to let it have always the same height (the smallest would be good).
 
magchiel
Member Candidate
Member Candidate
Posts: 131
Joined: Mon Jan 06, 2014 2:13 pm

Re: RouterOS v6.27 released

Wed Feb 18, 2015 2:23 pm

RB1100AHx2 switch functionality seems affected after upgrading from ROS6.25/RB3.18 to ROS6.27/RB3.22 resulting in periodic dropouts of the network as well as a flapping port to my 10MBit VoIP device.

Switch configuration is:
/interface ethernet
set [ find default-name=ether6 ] arp=proxy-arp
set [ find default-name=ether7 ] master-port=ether6
set [ find default-name=ether8 ] master-port=ether6
set [ find default-name=ether9 ] master-port=ether6
set [ find default-name=ether10 ] master-port=ether6
set [ find default-name=ether11 ] comment=WAN
/interface ethernet switch port
set 5 default-vlan-id=1 vlan-header=always-strip vlan-mode=secure
set 6 default-vlan-id=1 vlan-header=always-strip vlan-mode=secure
set 7 default-vlan-id=1 vlan-header=always-strip vlan-mode=secure
set 8 default-vlan-id=1 vlan-header=always-strip vlan-mode=secure
set 9 vlan-header=add-if-missing vlan-mode=secure
set 10 vlan-header=add-if-missing vlan-mode=secure
/interface ethernet switch vlan
add independent-learning=yes ports=ether6,ether7,ether8,ether9,ether10,switch1-cpu switch=\
    switch1 vlan-id=1
add independent-learning=yes ports=ether10,switch1-cpu switch=switch1 vlan-id=100
ether 1-5 are unused.
ether 6-9 are access ports.
ether10 is trunk port for VLAN1 and VLAN100 to an HP switch.

In addition, ether6 (master port) had a VLAN configured on the CPU-side configured as
/interface vlan
add interface=ether6 l2mtu=1594 name=vlan100 vlan-id=100
This has been running fine for over a year on various releases of RouterOS, however after the update of both ROS and RB traffic was erratic and the log was filled with a flapping ethernet port (up/down).

Placing a dedicated switch on the non-switched ether2 port to all the ports solves the issue. Aside from necessary reconfigurations to keep the network running, i.e. move the VLAN interface from ether6 to ether2 along with addresses, DHCP (both for VLAN1 and VLAN100) and hotspot services (running VLAN100), no further changes to the network have been made.

Any ideas?
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Wed Feb 18, 2015 2:28 pm

magchiel - Please generate supout file on your device and send it to support@mikrotik.com.
 
magchiel
Member Candidate
Member Candidate
Posts: 131
Joined: Mon Jan 06, 2014 2:13 pm

Re: RouterOS v6.27 released

Wed Feb 18, 2015 3:11 pm

magchiel - Please generate supout file on your device and send it to support@mikrotik.com.
done.
 
PashaT
just joined
Posts: 19
Joined: Sat Feb 01, 2014 1:10 am
Location: Zhytomyr, Ukraine

Re: RouterOS v6.27 released

Wed Feb 18, 2015 5:21 pm

RB951g-2Hnd

Interfaces - Blink not working.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Wed Feb 18, 2015 7:55 pm

RB133C3 - Sytem/Packages/Check shows 6.27 available but version 6.xx bricks RB133C3.
Should be therefore 6.xx be reported to this router as upgrade ?
The only valid system for RB133C3 are RouterOS 2.9.51...
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Wed Feb 18, 2015 8:09 pm

EoIP tunnels stopped working after 6.27 release... Any Ideas or other known issues with this upgrade like this. Simple EoIP just two routers connected to each other with public IPs any help would be greatly appreciated.
All my network work with EoIP, no one single problem on 6.27,
the error are surely your configuration, paste it on the forum.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Wed Feb 18, 2015 8:23 pm

After some days of use 6.27 on ALL my 200 network devices
(i have also near 4000 CPE all upgraded up to to 6.20, and 4 Gateway for PPPoE all forced to 6.7 for the unresolved bug also described on my signature)

All 200 devices with 3.22 BIOS except 2 RB1200 at 3.10, because for RB1200 (AMCC460) the latest released bios are 3.10

1) No single nstreme or nv2 problem on 5GHz (I not use 802.11 or 2.4GHz)
2) No single BGP, VRRP or EoIP problem
3) No single pppoe problem on transit from CPE (6.20) to Gateway (I'm forced to 6.7 on pppoe servers)
4) No system healt problem on any device
5) No strange shutdown or other problems.
6) No misaligned clock on x86, mipsbe, tilera or powerpc device (i not longer use obsolete mipsle)

7) The only problem are the OID for system voltage, on some random boards (7 from 200, various models), after upgrade, I stop get only the voltage value (obviously the function are supported on that devices!)
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.8.0
( 1.3.6.1.4.1.14988.1.1.3.8.0 )
Simply reboot the device, do not get the solution.
The solution (my solution...): open the device with clean winbox (no load previous session), click on system/healt, open new terminal, write "/system healt;print", press enter, and write "print oid", press enter and after that, reboot the device, and the system healt voltage oid are get again by snmp.
 
mike910815
just joined
Posts: 1
Joined: Wed Feb 18, 2015 7:33 pm

Re: RouterOS v6.27 released

Wed Feb 18, 2015 8:51 pm

I had a problem on my 2009 vintage RB433 after installing v6.27. I had the MTU on all Ethernet ports set to 1522 as advertised here http://wiki.mikrotik.com/wiki/Manual:Ma ... uterBoards

Everything was working fine before the upgrade reboot (I think I was running 6.22), but after the reboot ports 2 and 3 were dead. I had to set the MTU down to 1518 to get them to work and it will not accept a setting of 1522 anymore. An MTU value of 1522 still works on the first port.

For anyone with an RB433 I suggest setting your MTU to 1518 or less before performing the upgrade to 6.27. I'm not sure if this will apply to any other hardware.
 
ibm
Member
Member
Posts: 306
Joined: Mon May 12, 2014 5:16 pm

Re: RouterOS v6.27 released

Wed Feb 18, 2015 9:37 pm

After some days of use 6.27 on ALL my 200 network devices
(i have also near 4000 CPE all upgraded up to to 6.20, and 4 Gateway for PPPoE all forced to 6.7 for the unresolved bug also described on my signature)
The bug is also present with non standard eoip and pppoe server configuration?
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Wed Feb 18, 2015 10:50 pm

After some days of use 6.27 on ALL my 200 network devices
(i have also near 4000 CPE all upgraded up to to 6.20, and 4 Gateway for PPPoE all forced to 6.7 for the unresolved bug also described on my signature)
The bug is also present with non standard eoip and pppoe server configuration?
The bug are present on all possible variant of config, I write "default settings" to underline the easy way for reproduce the bug.
For make it all worst, if you use default-encryption on pppoe server over EoIP tunnel, the kernel crash at the first logged user.

If you read my previous post on the previous version topic, you can read me proposing that kernel crash bug propably since 6.8, and I open also the ticket, but nothing is changed till now.
 
alibalalo
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Wed Feb 18, 2015 10:48 pm
Contact:

Re: RouterOS v6.27 released

Wed Feb 18, 2015 10:59 pm

Trouble seeing where health sxt for not offering voltage and temperature this problem only in sxt
0.PNG
1.PNG
You do not have the required permissions to view the files attached to this post.
 
ibm
Member
Member
Posts: 306
Joined: Mon May 12, 2014 5:16 pm

Re: RouterOS v6.27 released

Thu Feb 19, 2015 12:01 am

After some days of use 6.27 on ALL my 200 network devices
(i have also near 4000 CPE all upgraded up to to 6.20, and 4 Gateway for PPPoE all forced to 6.7 for the unresolved bug also described on my signature)
The bug is also present with non standard eoip and pppoe server configuration?
The bug are present on all possible variant of config, I write "default settings" to underline the easy way for reproduce the bug.
For make it all worst, if you use default-encryption on pppoe server over EoIP tunnel, the kernel crash at the first logged user.

If you read my previous post on the previous version topic, you can read me proposing that kernel crash bug propably since 6.8, and I open also the ticket, but nothing is changed till now.
Are you sure about this?
A few days ago I tested a configuration with 3 rb951 with 6.27 and ospf running, on the first rb I create an eoip tunnel to the third and I created also a pppoe server on a bridge in wich there is also the eoip tunnel. Then i created an eoip tunnel in the third rb to first and I put a pppoe client on a bridge in which there is also the eoip tunnel. I had encryption activated on pppoe and I had no problem for the time of test (about 1 hour).
PPPoE MTU is 1500, EOIP MTU is 1512 and interfaces MTU are 1554 (I reserved 4 byte for future vlans on the eoip).
Last edited by ibm on Thu Feb 19, 2015 10:25 am, edited 2 times in total.
 
marcodefreitas
just joined
Posts: 20
Joined: Tue Feb 10, 2015 7:25 pm

Re: RouterOS v6.27 released

Thu Feb 19, 2015 3:26 am

The bug are present on all possible variant of config, I write "default settings" to underline the easy way for reproduce the bug.
For make it all worst, if you use default-encryption on pppoe server over EoIP tunnel, the kernel crash at the first logged user.

If you read my previous post on the previous version topic, you can read me proposing that kernel crash bug propably since 6.8, and I open also the ticket, but nothing is changed till now.
Did you tried VPLS/MPLS in this setup?
 
User avatar
hossain2004a
Member Candidate
Member Candidate
Posts: 247
Joined: Mon Dec 22, 2014 7:34 pm
Location: Iran

Re: RouterOS v6.27 released

Thu Feb 19, 2015 8:21 am

There is a little problem annoying me each time I upgrade and:
after each upgrade all of my counter will reset.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Thu Feb 19, 2015 9:11 am

Counters are reset by reboot.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Thu Feb 19, 2015 9:47 am

rextended - I have created configuration which you did describe. Will see if we manage to reproduce your issue.

alibalalo - Which model of SXT are you using? Not all devices has something to show under Health menu.
 
ibm
Member
Member
Posts: 306
Joined: Mon May 12, 2014 5:16 pm

Re: RouterOS v6.27 released

Thu Feb 19, 2015 10:27 am

Are you sure about this?
A few days ago I tested a configuration with 3 rb951 with 6.27 and ospf running, on the first rb I create an eoip tunnel to the third and I created also a pppoe server on a bridge in wich there is also the eoip tunnel. Then i created an eoip tunnel in the third rb to first and I put a pppoe client on a bridge in which there is also the eoip tunnel. I had encryption activated on pppoe and I had no problem for the time of test (about 1 hour).
PPPoE MTU is 1500, EOIP MTU is 1512 and interfaces MTU are 1554 (I reserved 4 byte for future vlans on the eoip).
This is a screen on the rb1 (the pppoe server), as
you can see there is also the encryption running.

Image
 
User avatar
paka
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jan 08, 2009 4:25 pm
Location: Bonn, Germany
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 11:14 am

Maybe Winbox is slow to give updates beause your router is 100% CPU loaded? What is the cause of CPU load ?

100 % CPU load is since we have upgraded from v6.6 to v6.22.
The cause for that is bug :)
see here http://forum.mikrotik.com/viewtopic.php?t=91468

in v6.22 we had not problem with system time
You say v6.22 but image shows v6.25, but this topic is actually about v6.27 ...
I've upgraded to v6.27, regardless system time does not work
For problem with 100 % CPU found - dude usage over 72%
but i can't understand why dude usage? - dude is not activated, see package state by attachment
You do not have the required permissions to view the files attached to this post.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Thu Feb 19, 2015 11:29 am

paka - Do not simply disable Dude package. Please remove it and check your CPU usage then. If load drops, then check clock again.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 11:30 am

The bug are present on all possible variant of config, I write "default settings" to underline the easy way for reproduce the bug.
For make it all worst, if you use default-encryption on pppoe server over EoIP tunnel, the kernel crash at the first logged user.

If you read my previous post on the previous version topic, you can read me proposing that kernel crash bug propably since 6.8, and I open also the ticket, but nothing is changed till now.
Did you tried VPLS/MPLS in this setup?
Not, I not use VPLS or MPLS on any point of my net.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 11:40 am

There is a little problem annoying me each time I upgrade and:
after each upgrade all of my counter will reset.
The couter are not stored inside RB and is perfectly normal to lost all,
is not a bug.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 11:42 am

Are you sure about this?
A few days ago I tested a configuration with 3 rb951 with 6.27 and ospf running, on the first rb I create an eoip tunnel to the third and I created also a pppoe server on a bridge in wich there is also the eoip tunnel. Then i created an eoip tunnel in the third rb to first and I put a pppoe client on a bridge in which there is also the eoip tunnel. I had encryption activated on pppoe and I had no problem for the time of test (about 1 hour).
PPPoE MTU is 1500, EOIP MTU is 1512 and interfaces MTU are 1554 (I reserved 4 byte for future vlans on the eoip).
This is a screen on the rb1 (the pppoe server), as
you can see there is also the encryption running.

Image
Your test are invalid, you put the pppoe-server on the bridge, not the pppoe-server on eoip directly.
I never mentioned bridges.
 
ibm
Member
Member
Posts: 306
Joined: Mon May 12, 2014 5:16 pm

Re: RouterOS v6.27 released

Thu Feb 19, 2015 11:46 am

Are you sure about this?
A few days ago I tested a configuration with 3 rb951 with 6.27 and ospf running, on the first rb I create an eoip tunnel to the third and I created also a pppoe server on a bridge in wich there is also the eoip tunnel. Then i created an eoip tunnel in the third rb to first and I put a pppoe client on a bridge in which there is also the eoip tunnel. I had encryption activated on pppoe and I had no problem for the time of test (about 1 hour).
PPPoE MTU is 1500, EOIP MTU is 1512 and interfaces MTU are 1554 (I reserved 4 byte for future vlans on the eoip).
This is a screen on the rb1 (the pppoe server), as
you can see there is also the encryption running.

Image
Your test are invalid, you put the pppoe-server on the bridge, not the pppoe-server on eoip directly.
I never mentioned bridges.
Mmh, ok.
Using bridge is not for you a good workaround?
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 12:02 pm

rextended - I have created configuration which you did describe. Will see if we manage to reproduce your issue.

alibalalo - Which model of SXT are you using? Not all devices has something to show under Health menu.
If you take in charge the bug,
I can make again the test config and post it on the forum.
(On the past RB1100AHx2 + RB951Ui-2HnD, but also happen on new CCR... is not hardware related...)

Those are the links for all post about this two bug:
http://forum.mikrotik.com/viewtopic.php ... x2#p411334
http://forum.mikrotik.com/viewtopic.php ... x2#p411343
http://forum.mikrotik.com/viewtopic.php ... x2#p417272
http://forum.mikrotik.com/viewtopic.php ... x2#p421337
http://forum.mikrotik.com/viewtopic.php ... x2#p440221
The various links also contain some ticket # already opened.
Last edited by rextended on Thu Feb 19, 2015 12:23 pm, edited 1 time in total.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 12:14 pm

Mmh, ok.
Using bridge is not for you a good workaround?
You probably find the solution for circumventing the problem (must be tested with real traffic first),
but the problem still present.

I also stop using "default-encription", but the memory leak when pass traffic, hang the board after some time is used....
 
ibm
Member
Member
Posts: 306
Joined: Mon May 12, 2014 5:16 pm

Re: RouterOS v6.27 released

Thu Feb 19, 2015 12:22 pm

Mmh, ok.
Using bridge is not for you a good workaround?
You probably find the solution for circumventing the problem (must be tested with real traffic first),
but the problem still present.

I also stop using "default-encription", but the memory leak when pass traffic, hang the board after some time is used....
I forgot to mention that with all default MTU when I tried to ping the pppoe server from the pppoe client routerboard with a MTU size bigger than 1454 the rb1 rebooted due a kernel panic.
So the problem could be related to MTU.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Thu Feb 19, 2015 12:25 pm

rextended - Could you please generate new supout file after your device has crashed and send it to our support mail? I will check it out and try to rerpoduce.

For a few hours my setup is running now and no issues. Links to previous posts include few ticket numbers but they are from old versions and more related to other issues. Supout file from latest version with crash report would be very helpful.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 12:30 pm

Mmh, ok.
Using bridge is not for you a good workaround?
You probably find the solution for circumventing the problem (must be tested with real traffic first),
but the problem still present.

I also stop using "default-encription", but the memory leak when pass traffic, hang the board after some time is used....
I forgot to mention that with all default MTU when I tried to ping the pppoe server from the pppoe client routerboard with a MTU size bigger than 1454 the rb1 rebooted due a kernel panic.
So the problem could be related to MTU.
I do not know what is happen, but all start with RouterOS 6.8, when mikrotik has rewrited ppp:

*) kernel drivers for ppp, pppoe, pptp, l2tp are now lock-less on transmit %26 receive;
but it deplete free memory until kernel crash, if pppoe-server are (DIRECTLY) over EoIP

*) all ppp packets (except discovery packets) now can be handled by multiple cores;
i not know is it related

*) MPPE driver now can handle up to 256 out-of-order packets;
but crash the kernel if MPPE encryption are used in combination with MRRU on pppoe-server over EoIP, when pass traffic on pppoe link.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 12:31 pm

rextended - Could you please generate new supout file after your device has crashed and send it to our support mail? I will check it out and try to rerpoduce.

For a few hours my setup is running now and no issues. Links to previous posts include few ticket numbers but they are from old versions and more related to other issues. Supout file from latest version with crash report would be very helpful.
Ok, wait please, I make it again:

I use one CCR-1036-12G-4S and one RB951Ui-2HnD
Both just netinstalled only with routeros-6.27, without keep old configuration, and update the bios with 3.22 on both.
Only one ethernet cable put between the two ether2 of the devices.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Thu Feb 19, 2015 1:06 pm

rextended - Seems like I managed to reproduce. Wil see what programmers can do about it. Thank you.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 1:19 pm

rextended - Seems like I managed to reproduce. Wil see what programmers can do about it. Thank you.
VERY VERY VERY THANKS!!!!!!!!



Config on CCR 1:
[admin@MikroTik] > export
# jan/02/1970 00:37:15 by RouterOS 6.27
# software id = ****-****
#
/interface eoip
add !keepalive mac-address=02:4B:D6:06:ED:9B name=eoip-tunnel1 remote-address=10.0.0.2 tunnel-id=0
/port
set 0 name=serial0
set 1 name=serial1
/interface pppoe-server server
add disabled=no interface=eoip-tunnel1 max-mru=1480 max-mtu=1480 mrru=1600 service-name=service1
/ip address
add address=10.0.0.1/24 interface=ether2 network=10.0.0.0
/ppp secret
add local-address=10.1.0.1 name=test password=test remote-address=10.1.0.2
/system routerboard settings
set cpu-frequency=1200MHz memory-frequency=1066DDR
[admin@MikroTik] > 
config on RB951 and lines with errors:
jan/02/1970 00:01:12 system,error,critical System rebooted because of kernel failu
re
jan/02/1970 00:01:12 system,error,critical Out of memory condition was detected
jan/02/1970 00:01:12 system,error,critical router was rebooted without proper shut
down
[admin@MikroTik] > export
# jan/02/1970 00:05:13 by RouterOS 6.27
# software id = ****-****
#
/interface wireless
set [ find default-name=wlan1 ] l2mtu=2290
/interface eoip
add !keepalive mac-address=02:81:70:72:C2:07 name=eoip-tunnel1 remote-address=10.0.0.1 tunnel-id=0
/interface pppoe-client
add add-default-route=yes disabled=no interface=eoip-tunnel1 mrru=1600 name=pppoe-out1 password=test user=test
/ip address
add address=10.0.0.2/24 interface=ether2 network=10.0.0.0
/system routerboard settings
set cpu-frequency=500MHz
[admin@MikroTik] > 
After more than 100M of traffic are passed, RB951 go out of memory and kernel crash.
For make crash CCR, you must do that various time, because CCR has more memory than RB951

For other users: OBVIOUSLY this configuration is ONLY for test purpose, not how pppoe must be used between two devices.
The config is simulating this:
pppoe-server->EoIP server->various network devices->EoIP client->bridge->wlan->cpe wlan->pppoe client
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 1:36 pm

Mmh, ok.
Using bridge is not for you a good workaround?
You probably find the solution for circumventing the problem (must be tested with real traffic first),
but the problem still present.

I also stop using "default-encription", but the memory leak when pass traffic, hang the board after some time is used....
I forgot to mention that with all default MTU when I tried to ping the pppoe server from the pppoe client routerboard with a MTU size bigger than 1454 the rb1 rebooted due a kernel panic.
So the problem could be related to MTU.
I do the same test again, using default bridge between pppoe-server and EoIP, and one between eoip and pppoe-client
this not solve temporarly the problem :(
 
ibm
Member
Member
Posts: 306
Joined: Mon May 12, 2014 5:16 pm

Re: RouterOS v6.27 released

Thu Feb 19, 2015 2:30 pm

I do the same test again, using default bridge between pppoe-server and EoIP, and one between eoip and pppoe-client
this not solve temporarly the problem :(
How is it possible?
These are my export:

RB1 Server:
/interface bridge
add mtu=1554 name=bridge_pppoe
add mtu=1554 name=bridge_wan
add mtu=1500 name=lo
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n disabled=no frequency=2422 l2mtu=2290 mode=station-bridge ssid="MikroTik test" tx-power=14 tx-power-mode=all-rates-fixed
/interface ethernet
set [ find default-name=ether2 ] mtu=1554
/interface eoip
add !keepalive mac-address=02:F5:3B:21:71:7E mtu=1512 name=eoip-tunnel1 remote-address=10.1.0.6 tunnel-id=0
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys wpa2-pre-shared-key=test
/ppp profile
set 0 dns-server=10.1.0.1 local-address=10.128.0.1 use-compression=no use-mpls=no use-vj-compression=no
set 1 dns-server=10.1.0.1 local-address=10.128.0.1 use-compression=no use-mpls=no use-vj-compression=no
/routing ospf instance
set [ find default=yes ] redistribute-static=as-type-1 router-id=10.101.0.1
/interface bridge port
add bridge=bridge_wan interface=wlan1
add bridge=bridge_wan interface=ether1
add bridge=bridge_pppoe interface=eoip-tunnel1
/interface pppoe-server server
add authentication=chap,mschap2 disabled=no interface=bridge_pppoe max-mru=1500 max-mtu=1500 service-name=service1
/ip address
add address=10.1.0.1/30 interface=ether2 network=10.1.0.0
add address=10.101.0.1/32 interface=lo network=10.101.0.1
/ip dhcp-client
add dhcp-options=hostname,clientid interface=bridge_wan
add default-route-distance=0 dhcp-options=hostname,clientid disabled=no interface=wlan1
/ip firewall nat
add action=masquerade chain=srcnat out-interface=bridge_wan
/ip route
add disabled=yes distance=1 dst-address=192.168.0.190/32 gateway=bridge_wan
/ppp secret
add name=test password=test profile=default-encryption remote-address=10.1.0.200 service=pppoe
/routing ospf interface
add authentication=md5 authentication-key=test interface=ether2 network-type=broadcast
/routing ospf network
add area=backbone network=10.1.0.0/30
add area=backbone network=10.1.0.4/30
/system clock
set time-zone-name=Europe/Rome
/system ntp client
set enabled=yes primary-ntp=192.168.0.1

RB3 Client:
/interface bridge
add mtu=1554 name=bridge1
add mtu=1500 name=lo
/interface wireless
set [ find default-name=wlan1 ] l2mtu=2290
/interface ethernet
set [ find default-name=ether2 ] mtu=1554
/interface eoip
add !keepalive mac-address=FE:8A:BC:D5:5E:9B mtu=1512 name=eoip1 remote-address=10.1.0.1 tunnel-id=0
/ip pool
add name=dhcp_pool1 ranges=192.168.1.2-192.168.1.254
/ip dhcp-server
add address-pool=dhcp_pool1 disabled=no interface=ether4 lease-time=3d name=dhcp1
/interface pppoe-client
add disabled=no interface=bridge1 max-mru=1500 max-mtu=1500 mrru=1600 name=pppoe-out1 password=test profile=default-encryption user=test
/routing ospf instance
set [ find default=yes ] redistribute-connected=as-type-1 redistribute-static=as-type-1 router-id=10.101.0.6
/interface bridge port
add bridge=bridge1 interface=eoip1
/ip address
add address=10.1.0.6/30 interface=ether2 network=10.1.0.4
add address=10.101.0.6/32 interface=lo network=10.101.0.6
add address=192.168.1.1/24 interface=ether4 network=192.168.1.0
/ip dhcp-server network
add address=192.168.1.0/24 gateway=192.168.1.1
/ip dns
set servers=8.8.8.8
/ip firewall nat
add action=masquerade chain=srcnat out-interface=pppoe-out1 src-address=192.168.1.0/24
/ip route
add distance=1 gateway=pppoe-out1
/routing ospf interface
add authentication=md5 authentication-key=test interface=ether2 network-type=broadcast
/routing ospf network
add area=backbone network=10.1.0.4/30
/system clock
set time-zone-name=Europe/Rome
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 2:42 pm

/interface bridge
add mtu=1554 name=bridge_pppoe
I do not know, but I use all DEFAULT settings, not mtu=1554
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 2:57 pm

RB951g-2Hnd

Interfaces - Blink not working.
on 6.27 (3.22) it's working like 6.23 (3.18):
works on all connected ethernet ports,
not work on unconnected ethernets.
all connected ethernets blink at the same time, not only the selected.
 
mcdebugger
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Mon Oct 03, 2011 11:10 am

Re: RouterOS v6.27 released

Thu Feb 19, 2015 7:32 pm

Any news on CAPsMAN? See nothing in changelogs for recent versions, do U have some development on the topic?
 
alibalalo
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Wed Feb 18, 2015 10:48 pm
Contact:

Re: RouterOS v6.27 released

Thu Feb 19, 2015 9:48 pm

Use the device sxt 5ndr2 lite
In the previous version RouterOS v5 was working well
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Fri Feb 20, 2015 12:43 am

Use the device sxt 5ndr2 lite
In the previous version RouterOS v5 was working well
What version exactly?
I downgrade one SXT Lite5 (SXT 5nD r2) serial-number: 46AD048A8FE9 BIOS 3.18
from 6.20 to 5.26 but I not see in both case any info on healt...

I not remember any "Lite" model with temperature or voltage sensor...

SXT 2nD r2 (SXT Lite 2):
[admin@xxx] > sys
[admin@xxx] /system> rou
[admin@xxx] /system routerboard> pri
       routerboard: yes
             model: SXT 2nD r2
     serial-number: 467E0240D765
  current-firmware: 3.18
  upgrade-firmware: 3.18
[admin@xxx] /system routerboard> ..
[admin@xxx] /system> he
[admin@xxx] /system health> pri

[admin@xxx] /system health>
RB911-5Hn (RB911 Lite5)
[admin@xxx] > sys
[admin@xxx] /system> rou
[admin@xxx] /system routerboard> pri
       routerboard: yes
             model: 911-5Hn
     serial-number: 4E6704A1B74B
  current-firmware: 3.18
  upgrade-firmware: 3.18
[admin@xxx] /system routerboard> ..
[admin@xxx] /system> he
[admin@xxx] /system health> pri

[admin@xxx] /system health> 
SXT 5HnD:
[admin@xxx] /system routerboard> pri
       routerboard: yes
             model: SXT 5HnD
     serial-number: 2DCA012AF8C3
  current-firmware: 3.17
  upgrade-firmware: 3.17
[admin@xxx] /system routerboard> ..
[admin@xxx] /system> health 
[admin@xxx] /system health> pri
      voltage: 18.1V
  temperature: 30C
[admin@xxx] /system health> 
SXT G-2HnD:
[admin@xxx] /system routerboard> pri
       routerboard: yes
             model: SXT G-2HnD
     serial-number: 41F902558F90
  current-firmware: 3.17
  upgrade-firmware: 3.17
[admin@xxx] /system routerboard> ..
[admin@xxx] /system> he
[admin@xxx] /system health> pri
      voltage: 23.8V
  temperature: 36C
[admin@xxx] /system health> 
SXT 5HPnD:
[admin@xxx] > sys
[admin@xxx] /system> rou
[admin@xxx] /system routerboard> pri
       routerboard: yes
             model: SXT 5HPnD
     serial-number: 45EF023C9C2B
  current-firmware: 3.17
  upgrade-firmware: 3.17
[admin@xxx] /system routerboard> ..
[admin@xxx] /system> he
[admin@xxx] /system health> pri
      voltage: 23.6V
  temperature: 34C
[admin@xxx] /system health>
SXT G-5HPnD r2 (SXT SA):
[admin@xxx] > sys
[admin@xxx] /system> rou
[admin@xxx] /system routerboard> pri
       routerboard: yes
             model: SXT G-5HPnD r2
     serial-number: 46BC02124E94
  current-firmware: 3.22
  upgrade-firmware: 3.22
[admin@xxx] /system routerboard> .. he
[admin@xxx] /system health> pri
      voltage: 26.7V
  temperature: 18C
[admin@xxx] /system health> 
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Fri Feb 20, 2015 10:54 am

After some day of running 6.27,
RANDOMLY
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.8.0
( 1.3.6.1.4.1.14988.1.1.3.8.0 )
stop working on some boards.

STILL WORKING ON API, WINBOX AND TERMINAL, ONLY THIS SPECIFIC SNMP OID STOP WORKING

On 6.24 I never have one problem (Yes, I jump directly from 6.24 to 6.27 on all core machines)

I do not understand why the simple or twice reboot do not solve nothing, buit if I do:
The solution (my solution...): open the device with clean winbox (no load previous session), click on system/healt, open new terminal, write "/system healt;print", press enter, and write "print oid", press enter and after that, reboot the device, and the system healt voltage oid are get again by snmp
after that the OID mtxrHlVoltage work again.

Is the only OID stop working (the OK are for each RB model than support it!),
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.mtxrHlVoltage.0: KO on some random boards
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.mtxrHlActiveFan.0: OK on all boards
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.mtxrHlTemperature.0: OK on all boards
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.mtxrHlProcessorTemperature.0: OK on all boards
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.mtxrHlCurrent.0: OK on all boards
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.mtxrHlPower.0: OK on all boards
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.mtxrHlProcessorFrequency.0: OK on all boards
Last edited by rextended on Fri Feb 20, 2015 11:17 am, edited 3 times in total.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Feb 20, 2015 10:58 am

alibalalo - This model does not have any Health info as already been said in this topic. I double checked also on version 5.26. There are still nothing on Health. Thought maybe there could have been, for example, temperature=0, but still Health window is empty.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Fri Feb 20, 2015 1:44 pm

I also update MIKROTIK-MIB, but after fix some problem, the bug is still present.
 
User avatar
paka
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jan 08, 2009 4:25 pm
Location: Bonn, Germany
Contact:

Re: RouterOS v6.27 released

Fri Feb 20, 2015 2:38 pm

paka - Do not simply disable Dude package. Please remove it and check your CPU usage then. If load drops, then check clock again.
Thank you very much! it is working :D
 
w0lt
Long time Member
Long time Member
Posts: 537
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: RouterOS v6.27 released

Fri Feb 20, 2015 3:53 pm

Can someone confirm, whether or not, if the EoIP "auto-mtu" function is working correctly in v6.27?
It doesn't seem to be working for me, and wanted to know if anyone else is having this issue?
Works ok for "GRE" tunnels.. :-)
I use the EoIP tunnel over the internet, and have different MTU's when using a cable modem on one end, and a DSL (PPPoE) on the other end. and as I said, the "auto-mtu" function seems to compensate very nicely using GRE, but not EoIP. If this needs to be corrected, I would really like to see that in 6.28 if possible.

Thanks, 8)

-tp
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Fri Feb 20, 2015 4:40 pm

Can someone confirm, whether or not, if the EoIP "auto-mtu" function is working correctly in v6.27?
It doesn't seem to be working for me, and wanted to know if anyone else is having this issue?
Works ok for "GRE" tunnels.. :-)
I use the EoIP tunnel over the internet, and have different MTU's when using a cable modem on one end, and a DSL (PPPoE) on the other end. and as I said, the "auto-mtu" function seems to compensate very nicely using GRE, but not EoIP. If this needs to be corrected, I would really like to see that in 6.28 if possible.

Thanks, 8)

-tp
I use auto discovery on bridge, EoIP and GRE (from 6.2? to 6.27) and actually I do not have noticed any problem.

More detail, please?
 
User avatar
jwcn
Forum Guru
Forum Guru
Posts: 1495
Joined: Sun Aug 27, 2006 6:49 am
Location: Maryland, USA
Contact:

Re: RouterOS v6.27 released

Fri Feb 20, 2015 6:24 pm

Still having 100% CPU issues on RB2011's. SNMP disabled, no polling with the Dude. Ticket Ticket#2015020266000038 from three weeks ago still unanswered. Please help. Management process culprit for the CPU spike. Spike to 100% and stops passing data. RB2011 is doing nothing except acting as a switch. Ports 1-5 switched 6-10 bridged to port 1.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Fri Feb 20, 2015 6:28 pm

Still having 100% CPU issues on RB2011's. SNMP disabled, no polling with the Dude. Ticket Ticket#2015020266000038 from three weeks ago still unanswered. Please help. Management process culprit for the CPU spike. Spike to 100% and stops passing data. RB2011 is doing nothing except acting as a switch. Ports 1-5 switched 6-10 bridged to port 1.
Too few details.
Packages and version of that package installed?
 
User avatar
jwcn
Forum Guru
Forum Guru
Posts: 1495
Joined: Sun Aug 27, 2006 6:49 am
Location: Maryland, USA
Contact:

Re: RouterOS v6.27 released

Fri Feb 20, 2015 6:39 pm

[img]
Mikrotik%20Screenshot.jpg
[/img]
You do not have the required permissions to view the files attached to this post.
 
vortex
Forum Guru
Forum Guru
Posts: 1092
Joined: Sat Feb 16, 2013 6:10 pm

Re: RouterOS v6.27 released

Fri Feb 20, 2015 7:14 pm

The banner wastes an unbelievable amount of space on mobile, leaving about half the screen for the actual posts in landscape, and completely obscuring the editing area also in landscape, so that composing posts in such mode is impossible.

I also did not find how to quote, that is why this post was added by itself to the bottom of the thread.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: RouterOS v6.27 released

Fri Feb 20, 2015 7:25 pm

[img]
Mikrotik%20Screenshot.jpg
[/img]
Where do you see 100 % cpu on your picture? How profiler looks like?
 
pturkey
newbie
Posts: 40
Joined: Wed Aug 19, 2009 7:30 pm

Re: RouterOS v6.27 released

Fri Feb 20, 2015 7:58 pm

I just upgraded to 6.27 on my RB711-5HnD and upgraded the routerboard to 3.22.
It looked good at the start so I ran a speed test at http://www.speedtest.net/.
The router disconnected, then I ran a wireless scan it shows no ap's at all.
Rebooting makes it reconnect but it disconnects as soon as I try a speed test.
Downgrading back to 6.23 make everything work again.

0 R name="wlan1" mtu=1500 mac-address=XX:XX:XX:XX:XX:XX arp=enabled interface-type=Atheros AR92xx mode=station-pseudobridge ssid="" frequency=5300
band=5ghz-a/n channel-width=20/40mhz-ht-below scan-list=default wireless-protocol=any wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no
security-profile=default compression=no
 
User avatar
jwcn
Forum Guru
Forum Guru
Posts: 1495
Joined: Sun Aug 27, 2006 6:49 am
Location: Maryland, USA
Contact:

Re: RouterOS v6.27 released

Fri Feb 20, 2015 8:53 pm

[img]
Mikrotik%20Screenshot.jpg
[/img]
Where do you see 100 % cpu on your picture? How profiler looks like?
Its been rebooted now so it doesn't show 100%. When it is at 100% I can't pull up anything but profiler shows management as the process.
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1222
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: RouterOS v6.27 released

Fri Feb 20, 2015 9:31 pm

It seems that SPF status is broken on CRS-125, with no info shown except 'module present' (S-31DLC20D).
Module works correctly nevertheless.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: RouterOS v6.27 released

Fri Feb 20, 2015 10:08 pm

Its been rebooted now so it doesn't show 100%. When it is at 100% I can't pull up anything but profiler shows management as the process.
Don't you have istalled dude package, do you?
 
infernoltu
just joined
Posts: 3
Joined: Fri Feb 20, 2015 11:45 pm

Re: RouterOS v6.27 released

Fri Feb 20, 2015 11:53 pm

Hello.

I read all posts here, but did not found that someone face same issue too.
I have a wide range of CCR1016 routers and routerOS based virtual routers.
The issue what i faced now is:
my cload core CCR1016-12G was able to be upgraded to newest 6.27 version with out any problems.
The upgrade was done from v6.24 to v6.27 on CCR1016
But now on virtual machines the upgrade fail.
My virtual routerOS are running v6.24 and v6.21.1.
When i go to system>packages>check for updates>download and upgrade, it tries to get latest v6.27 version, but during download it says it failed to download
isdn package.
Well this package i do not need, so i uninstalled it from mine virtual routers.
Then i repeat upgraded, download is successfull, it reboots for upgrade to be installed.
In console it writes it does the update.
No errors are given out by command line GUI.
But once router loads, and i log in to it, i see my old version v6.21.1 or v6.24
So it does not upgrade, and does not give any error.
 
User avatar
jwcn
Forum Guru
Forum Guru
Posts: 1495
Joined: Sun Aug 27, 2006 6:49 am
Location: Maryland, USA
Contact:

Re: RouterOS v6.27 released

Sat Feb 21, 2015 3:25 am

Its been rebooted now so it doesn't show 100%. When it is at 100% I can't pull up anything but profiler shows management as the process.
Don't you have istalled dude package, do you?
No.
 
yvhitxcel
just joined
Posts: 5
Joined: Sat Feb 21, 2015 10:02 am

Re: RouterOS v6.27 released

Sat Feb 21, 2015 10:23 am

ccr1036 12G-4s v6.27 hotspot not working.i didn't look the login web. my email 2338953@qq.com
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Sat Feb 21, 2015 12:03 pm

Hello.

I read all posts here, but did not found that someone face same issue too.
I have a wide range of CCR1016 routers and routerOS based virtual routers.
The issue what i faced now is:
my cload core CCR1016-12G was able to be upgraded to newest 6.27 version with out any problems.
The upgrade was done from v6.24 to v6.27 on CCR1016
But now on virtual machines the upgrade fail.
My virtual routerOS are running v6.24 and v6.21.1.
When i go to system>packages>check for updates>download and upgrade, it tries to get latest v6.27 version, but during download it says it failed to download
isdn package.
Well this package i do not need, so i uninstalled it from mine virtual routers.
Then i repeat upgraded, download is successfull, it reboots for upgrade to be installed.
In console it writes it does the update.
No errors are given out by command line GUI.
But once router loads, and i log in to it, i see my old version v6.21.1 or v6.24
So it does not upgrade, and does not give any error.
How much time you use same SoftwareID?
You use Software ID downloaded from Internet?
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Sat Feb 21, 2015 12:07 pm

ccr1036 12G-4s v6.27 hotspot not working.i didn't look the login web. my email 2338953@qq.com
Do not simply leave email, this is not one direct support service, open new thread and post your config.
If someone want help you, you get help.
All users must benefit from helping you.
 
infernoltu
just joined
Posts: 3
Joined: Fri Feb 20, 2015 11:45 pm

Re: RouterOS v6.27 released

Sat Feb 21, 2015 2:08 pm

Physical cloadcores run each of them with lic preinstalled.
Virtual mikrotiks, they are clones of each other.
I am using them already for couple years, and did not experienced any problems till now.
So this means if i try to get software upgrade with same ID, it will fail?
Hello.

I read all posts here, but did not found that someone face same issue too.
I have a wide range of CCR1016 routers and routerOS based virtual routers.
The issue what i faced now is:
my cload core CCR1016-12G was able to be upgraded to newest 6.27 version with out any problems.
The upgrade was done from v6.24 to v6.27 on CCR1016
But now on virtual machines the upgrade fail.
My virtual routerOS are running v6.24 and v6.21.1.
When i go to system>packages>check for updates>download and upgrade, it tries to get latest v6.27 version, but during download it says it failed to download
isdn package.
Well this package i do not need, so i uninstalled it from mine virtual routers.
Then i repeat upgraded, download is successfull, it reboots for upgrade to be installed.
In console it writes it does the update.
No errors are given out by command line GUI.
But once router loads, and i log in to it, i see my old version v6.21.1 or v6.24
So it does not upgrade, and does not give any error.
How much time you use same SoftwareID?
You use Software ID downloaded from Internet?
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: RouterOS v6.27 released

Sat Feb 21, 2015 3:03 pm

Physical cloadcores run each of them with lic preinstalled.
Virtual mikrotiks, they are clones of each other.
I am using them already for couple years, and did not experienced any problems till now.
So this means if i try to get software upgrade with same ID, it will fail?
Hello.

I read all posts here, but did not found that someone face same issue too.
I have a wide range of CCR1016 routers and routerOS based virtual routers.
The issue what i faced now is:
my cload core CCR1016-12G was able to be upgraded to newest 6.27 version with out any problems.
The upgrade was done from v6.24 to v6.27 on CCR1016
But now on virtual machines the upgrade fail.
My virtual routerOS are running v6.24 and v6.21.1.
When i go to system>packages>check for updates>download and upgrade, it tries to get latest v6.27 version, but during download it says it failed to download
isdn package.
Well this package i do not need, so i uninstalled it from mine virtual routers.
Then i repeat upgraded, download is successfull, it reboots for upgrade to be installed.
In console it writes it does the update.
No errors are given out by command line GUI.
But once router loads, and i log in to it, i see my old version v6.21.1 or v6.24
So it does not upgrade, and does not give any error.
How much time you use same SoftwareID?
You use Software ID downloaded from Internet?
Did you pay for license for each individual copy?
 
infernoltu
just joined
Posts: 3
Joined: Fri Feb 20, 2015 11:45 pm

Re: RouterOS v6.27 released

Sat Feb 21, 2015 4:39 pm

Problem solved.
Its not licensing or smth like that.
Its smth wrong with system>packages updater.
I upgraded manually from 6.21.1 to 6.26 and to 6.27 successfully.
Hello.

I read all posts here, but did not found that someone face same issue too.
I have a wide range of CCR1016 routers and routerOS based virtual routers.
The issue what i faced now is:
my cload core CCR1016-12G was able to be upgraded to newest 6.27 version with out any problems.
The upgrade was done from v6.24 to v6.27 on CCR1016
But now on virtual machines the upgrade fail.
My virtual routerOS are running v6.24 and v6.21.1.
When i go to system>packages>check for updates>download and upgrade, it tries to get latest v6.27 version, but during download it says it failed to download
isdn package.
Well this package i do not need, so i uninstalled it from mine virtual routers.
Then i repeat upgraded, download is successfull, it reboots for upgrade to be installed.
In console it writes it does the update.
No errors are given out by command line GUI.
But once router loads, and i log in to it, i see my old version v6.21.1 or v6.24
So it does not upgrade, and does not give any error.
How much time you use same SoftwareID?
You use Software ID downloaded from Internet?
 
yvhitxcel
just joined
Posts: 5
Joined: Sat Feb 21, 2015 10:02 am

Re: RouterOS v6.27 released

Sun Feb 22, 2015 5:45 am

ccr1036 12G-4s v6.27 hotspot not working.i didn't look the login web. my email 2338953@qq.com
Do not simply leave email, this is not one direct support service, open new thread and post your config.
If someone want help you, you get help.
All users must benefit from helping you.
interface,warning 3_WIFI: bridge port received packet with own address as source address, probably loop

why i got a lot of the warming message?how to fix

my ccr1036-12g-4s and a lot of other hardware buy only one week,,how to got Technical Support?
 
Spirch
Member Candidate
Member Candidate
Posts: 119
Joined: Sat May 03, 2014 5:04 am

Re: RouterOS v6.27 released

Sun Feb 22, 2015 6:09 am

I have a RB951G-2HnD with v6.13 and firmware v3.14

is there any reason for me to update to 6.27 if I currently have no issue?

this is a simple home router setup
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Sun Feb 22, 2015 8:11 am

If you are happy with your setup, don't touch it.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re:

Sun Feb 22, 2015 1:17 pm

If you are happy with your setup, don't touch it.
+100
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1222
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: RouterOS v6.27 released

Sun Feb 22, 2015 2:16 pm

There is a saying: Better is good's worst enemy.
 
vortex
Forum Guru
Forum Guru
Posts: 1092
Joined: Sat Feb 16, 2013 6:10 pm

Re: RouterOS v6.27 released

Sun Feb 22, 2015 5:16 pm

Upgrading from 5.26 to 6.25 or 6.27 enabled ppp, wireless, and hotspot (these last two very bad).
 
deanMKD1
Member
Member
Posts: 366
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: RouterOS v6.27 released

Mon Feb 23, 2015 2:48 am

@vortex what is very bad with wireless and hotspot?
 
vortex
Forum Guru
Forum Guru
Posts: 1092
Joined: Sat Feb 16, 2013 6:10 pm

Re: RouterOS v6.27 released

Mon Feb 23, 2015 3:19 am

That I had them disabled and the upgrade silently activated them, and I don't know if that results in a wide open network.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6694
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: RouterOS v6.27 released

Mon Feb 23, 2015 9:41 am

A loop [or bridge loop] occurs in computer networks when there is more than one Layer 2 (OSI model) path between two endpoints (e.g. multiple connections between two network hosts). Examine your network topology and find duplicate connection and remove it from your network.
ccr1036 12G-4s v6.27 hotspot not working.i didn't look the login web. my email 2338953@qq.com
Do not simply leave email, this is not one direct support service, open new thread and post your config.
If someone want help you, you get help.
All users must benefit from helping you.
interface,warning 3_WIFI: bridge port received packet with own address as source address, probably loop

why i got a lot of the warming message?how to fix

my ccr1036-12g-4s and a lot of other hardware buy only one week,,how to got Technical Support?
 
uldis
MikroTik Support
MikroTik Support
Posts: 3446
Joined: Mon May 31, 2004 2:55 pm

Re: RouterOS v6.27 released

Mon Feb 23, 2015 10:08 am

I just upgraded to 6.27 on my RB711-5HnD and upgraded the routerboard to 3.22.
It looked good at the start so I ran a speed test at http://www.speedtest.net/.
The router disconnected, then I ran a wireless scan it shows no ap's at all.
Rebooting makes it reconnect but it disconnects as soon as I try a speed test.
Downgrading back to 6.23 make everything work again.

0 R name="wlan1" mtu=1500 mac-address=XX:XX:XX:XX:XX:XX arp=enabled interface-type=Atheros AR92xx mode=station-pseudobridge ssid="" frequency=5300
band=5ghz-a/n channel-width=20/40mhz-ht-below scan-list=default wireless-protocol=any wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no
security-profile=default compression=no
Please provide us more information about your setup. The AP or this Client router stopped working?
Also send the support output files to support@mikrotik.com
 
simaskkk
just joined
Posts: 8
Joined: Tue Feb 26, 2013 4:48 pm

Re: RouterOS v6.27 released

Mon Feb 23, 2015 12:23 pm

Queue Tree queues does not work in 6.27 (all counters stays on 0) (at least for GRE tunnel interfaces) :)
Very poor performance for single TCP flow over GRE tunnel.
 
zyzelis
Member Candidate
Member Candidate
Posts: 213
Joined: Sun Apr 08, 2012 9:25 pm

Re: RouterOS v6.27 released

Mon Feb 23, 2015 1:38 pm

Queue Tree queues does not work in 6.27 (all counters stays on 0) (at least for GRE tunnel interfaces) :)
Very poor performance for single TCP flow over GRE tunnel.
If queue type is "default" Try to change default queue type to another eg from pfifo to RED. and write here if it helps.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Mon Feb 23, 2015 1:53 pm

simaskkk - Does problem persist if you disable/enable queues? Do you have scripts/schedulers or something else which might change queue settings while they are working?
 
simaskkk
just joined
Posts: 8
Joined: Tue Feb 26, 2013 4:48 pm

Re: RouterOS v6.27 released

Mon Feb 23, 2015 4:15 pm

I will do some testing to figure out where the problem is and will open the case soon.
simaskkk - Does problem persist if you disable/enable queues? Do you have scripts/schedulers or something else which might change queue settings while they are working?
 
krisjanis
MikroTik Support
MikroTik Support
Posts: 432
Joined: Tue Feb 05, 2013 5:00 pm

Re: RouterOS v6.27 released

Mon Feb 23, 2015 4:35 pm

It seems that SPF status is broken on CRS-125, with no info shown except 'module present' (S-31DLC20D).
Module works correctly nevertheless.
It's possible that system didn't manage to get correct info or get anything at all from eeprom/ddmi on transceiver. In cases like that after several attempts system will give up and leave those fields empty. Replugging the module, reboot or power cycle might help.
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1222
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: RouterOS v6.27 released

Mon Feb 23, 2015 11:12 pm

Tnx krisjanis,
Replugging the module did solve the issue - all info is in its place :-)
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Tue Feb 24, 2015 8:23 am

rextended - We finally managed to fix crash when PPPoE was being configured over EoIP. Fix should be included in 6.28rc5 and later versions of RouterOS.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Tue Feb 24, 2015 10:41 am

rextended - We finally managed to fix crash when PPPoE was being configured over EoIP. Fix should be included in 6.28rc5 and later versions of RouterOS.
YES! YES! YES!
Thanks!
 
sparrow
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Wed Jul 11, 2012 10:59 am

Re: RouterOS v6.27 released

Tue Feb 24, 2015 1:24 pm

What's new in 6.7 (2013-Nov-29 13:37):
*) fixed l2mtu changing on CCRs - could cause port flapping;
Changing l2mtu on any interface of my ccr 1036-12G-4S cause port flapping, shutting down all interface, someone had same problem?
This behaviour still persist on 6.27!
 
becs
MikroTik Support
MikroTik Support
Posts: 499
Joined: Thu Jul 07, 2011 8:26 am

Re: RouterOS v6.27 released

Tue Feb 24, 2015 3:03 pm

What's new in 6.7 (2013-Nov-29 13:37):
*) fixed l2mtu changing on CCRs - could cause port flapping;
Changing l2mtu on any interface of my ccr 1036-12G-4S cause port flapping, shutting down all interface, someone had same problem?
This behaviour still persist on 6.27!
Although similar, this behaviour (one all interface reload after L2MTU changes) is not related to the problem in v6.7.
Users are now warned in wiki about such behaviour.
Warning: L2MTU configuration changes on Cloud Core Routers evoke all interface reload (link down - link up) due to necessary internal processes.
It is recommended to configure L2MTU with caution by keeping in mind that it can cause short interruption with connected devices.
 
wotoni
just joined
Posts: 16
Joined: Sat Aug 04, 2012 12:13 am

Re: RouterOS v6.27 released

Tue Feb 24, 2015 5:27 pm

Hey, can we please have the .torrent files back for ALL RouterOS. I don't believe that I am the only one that uses the .torrent to download RouterOS. I myself support multiple different hardware flavors and to download each file separately can be a pain.

Thanks!
 
User avatar
bax
Member Candidate
Member Candidate
Posts: 268
Joined: Mon Dec 20, 2004 8:45 pm
Location: Croatia

Re: RouterOS v6.27 released

Tue Feb 24, 2015 7:27 pm

Well last night i was try to upgrade my x86 ROS to v6.27 ...
Userman is give error like "radius server not responding" so i must fast downgrade to v6.26.
On other routerboard devices it looks that all is fine.
Can someone try to upgrade device with userman ?
 
micromaxi
newbie
Posts: 43
Joined: Fri Feb 06, 2015 10:32 am

Re: RouterOS v6.27 released

Tue Feb 24, 2015 7:34 pm

Funny i just noticed on the download package from this site that the 6.27 software has been updated (release date is now 23-02-2015 where it was 11-02-2015) however i just cant find any changes in the changelog. And why hasnt the version number not been altered ?

Normis ?
 
uldis
MikroTik Support
MikroTik Support
Posts: 3446
Joined: Mon May 31, 2004 2:55 pm

Re: RouterOS v6.27 released

Tue Feb 24, 2015 8:08 pm

Funny i just noticed on the download package from this site that the 6.27 software has been updated (release date is now 23-02-2015 where it was 11-02-2015) however i just cant find any changes in the changelog. And why hasnt the version number not been altered ?

Normis ?
The release date changed because we added "smips" RouterOS version for the hAP lite boards in the website. There are no other changes.
 
User avatar
hossain2004a
Member Candidate
Member Candidate
Posts: 247
Joined: Mon Dec 22, 2014 7:34 pm
Location: Iran

Re: RouterOS v6.27 released

Tue Feb 24, 2015 9:14 pm

Well last night i was try to upgrade my x86 ROS to v6.27 ...
Userman is give error like "radius server not responding" so i must fast downgrade to v6.26.
On other routerboard devices it looks that all is fine.
Can someone try to upgrade device with userman ?

It's been month, I've upgrade router with userman package, but no luck. Still have that error "not responding...." searched the forums and found no solution.
But it works fine except sometimes :D
 
finalcutroot
newbie
Posts: 45
Joined: Sun Mar 09, 2014 9:36 pm

Re: RouterOS v6.27 released

Tue Feb 24, 2015 9:39 pm

This is the third time
when i open winbox and goto the Interfaces
the router crash
i use simple script/scheduler to turn off interfaces on specific time
 
hapi
Member Candidate
Member Candidate
Posts: 232
Joined: Fri Mar 11, 2011 11:21 am
Location: Czech Republic

Re: RouterOS v6.27 released

Tue Feb 24, 2015 11:01 pm

This is the third time
when i open winbox and goto the Interfaces
the router crash
i use simple script/scheduler to turn off interfaces on specific time
same problem on two x86 routers. Local access is ok but print anything go to crash or not print. Router is not function. Same is fresh install 6.27 is same problem on same router.
 
Ljubo
just joined
Posts: 21
Joined: Thu Apr 24, 2014 10:57 am

Re: RouterOS v6.27 released

Wed Feb 25, 2015 11:12 am

An error, which I don't know the meaning of, occasionally appears in the log.
I would be greateful if you could tell me if this error occurs due to a configuration fault or if someone is trying to connect but I am unable to see the IP from which it is coming from.
This started happening after upgrade 6.27, but before the update I didn't see the error.
You do not have the required permissions to view the files attached to this post.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: RouterOS v6.27 released

Wed Feb 25, 2015 12:19 pm

Having three mipsbe routers connected to internet:

A: running SSTP server accepting SSTP conections from B and C
B: running SSTP server and client, connecting to A and accepting connections from C
C: running SSTP client and connecting to A and B

A had 6.25, B had 6.18, C had 6.25 and everything worked fine.

Decided to update A from 6.25 to 6.27. Result: Connection from B was fine. C was not able to establish connection.

Decided to update C from 6.25 to 6.27. Result: C is not able to establish connections both to A and B. The disk1 that was working in 6.25 was renamed to disk3 and new disk1 appeared – this should not happen!
And what is more: not running SSTP clients show incoming packets and data in interface overview. How to? Torch is blank…

Reverting both A and C to 6.25 and waiting a correction. After downgrade both A and C to 6.25 everything works correctly like before.

Supout was sent to support, ticket nr. [Ticket#2015021466000104]

To this ticket. I received today info from Mikrotik support that I should have all involved ros devices at the same level (6.27). But the ticket was also about the SSTP not working between two 6.27 devices. So the advice was false.

I found the solution myself: it is the PFS option that is not documented. Correct settings allows communication between both 6.27 as between different versions (for example 6.27-6.18 or 6.27-6.25 in my case).

Mikrotik should take care about the documentation if changing/adding anything!
 
siavashblade
just joined
Posts: 4
Joined: Wed Feb 25, 2015 1:02 pm

Re: RouterOS v6.27 released

Wed Feb 25, 2015 1:07 pm

hi guys I have a problem with this can you help me?
I didn't know how to make topic nor did I fine an appropriate place to post it so if you can help me or direct me to the best location I would appreciate it. thanks
first of all after I enable DDNS, in the status section it tells me that:
"DDNS server received request from ip ...(the public ip adress)... but your local ip was 192.168.1.6 (which is my gateway ip). DDNS service might not work."
and I can't ping the DNS name it gives me 100% timeout then I've added this command:"/ip firewall filter add action=accept chain=input disabled=no dst-port=8291 protocol=tcp place-before=0"
but this didnt help either! :|
what should I do?
I have ip cameras in my work place and I want to watch them from home via this feature.
can you help me?
 
mars
Member Candidate
Member Candidate
Posts: 228
Joined: Sun Mar 14, 2010 1:43 pm

Re: RouterOS v6.27 released

Wed Feb 25, 2015 2:44 pm

anybody having a problem with simple queues and mangle rules in ros 6.27
the mangle rules are not marking the traffic properly so simple queues are not working
in ros 6.26 it works with no problems
 
deanMKD1
Member
Member
Posts: 366
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: RouterOS v6.27 released

Thu Feb 26, 2015 1:35 am

hi guys I have a problem with this can you help me?
I didn't know how to make topic nor did I fine an appropriate place to post it so if you can help me or direct me to the best location I would appreciate it. thanks
first of all after I enable DDNS, in the status section it tells me that:
"DDNS server received request from ip ...(the public ip adress)... but your local ip was 192.168.1.6 (which is my gateway ip). DDNS service might not work."
and I can't ping the DNS name it gives me 100% timeout then I've added this command:"/ip firewall filter add action=accept chain=input disabled=no dst-port=8291 protocol=tcp place-before=0"
but this didnt help either! :|
what should I do?
I have ip cameras in my work place and I want to watch them from home via this feature.
can you help me?
You dont need to add filters in firewall to gain access to your cameras.! In what LAN port is connected your camera? Are you sure that port is properly forwarded?
 
User avatar
Farhadgh
just joined
Posts: 19
Joined: Wed Nov 27, 2013 4:38 pm
Contact:

Re: RouterOS v6.27 released

Thu Feb 26, 2015 2:36 am

Hello normis. I wanted to inform you of this bug in case of you didn't read that:
http://forum.mikrotik.com/viewtopic.php?f=1&t=94415
It's making me a lot of effort.
 
ofca
Member Candidate
Member Candidate
Posts: 228
Joined: Fri Aug 20, 2004 7:18 pm

Re: RouterOS v6.27 released

Thu Feb 26, 2015 4:42 am

so when all_packages torrent/zip will be back?
 
siavashblade
just joined
Posts: 4
Joined: Wed Feb 25, 2015 1:02 pm

Re: RouterOS v6.27 released

Thu Feb 26, 2015 7:37 am

hi guys I have a problem with this can you help me?
I didn't know how to make topic nor did I fine an appropriate place to post it so if you can help me or direct me to the best location I would appreciate it. thanks
first of all after I enable DDNS, in the status section it tells me that:
"DDNS server received request from ip ...(the public ip adress)... but your local ip was 192.168.1.6 (which is my gateway ip). DDNS service might not work."
and I can't ping the DNS name it gives me 100% timeout then I've added this command:"/ip firewall filter add action=accept chain=input disabled=no dst-port=8291 protocol=tcp place-before=0"
but this didnt help either! :|
what should I do?
I have ip cameras in my work place and I want to watch them from home via this feature.
can you help me?
You dont need to add filters in firewall to gain access to your cameras.! In what LAN port is connected your camera? Are you sure that port is properly forwarded?
all cameras plus computers and server are attached to a switch and one cable from switch is attached to ether 2 of my mikrotik and one cable from the dsl modem is attached to the ether1 of my mikrotik.
my internet is working on mikrotik gateway and I can ping 8.8.8.8 from winbox plus I've enabled ip cloud and it gave me the dns but I cant use it, it gave me 100% timeout. so I dont know what to do!
 
VagnerBecker
just joined
Posts: 18
Joined: Wed Mar 13, 2013 3:49 pm
Location: Brasil

Re: RouterOS v6.27 released

Thu Feb 26, 2015 3:22 pm

I'm having trouble with IPv6, the interface I try to add an ip starting from a pool is in red and does not work until you restart the equipment, is an example

ipv6 pool add prefix=2001:db8::/56 prefix-length=64 name=pool1
ipv6 address add interface=ether1 address=::1/64 from-pool=pool1
 
User avatar
karina
Member
Member
Posts: 460
Joined: Sat Feb 06, 2010 2:18 am
Location: Spain

Re: RouterOS v6.27 released

Thu Feb 26, 2015 3:29 pm

MikroTik 951G-2HnD.

RouterOS v6.23
Image
RouterOS v6.27
Image

Awesome improvement MikroTik! :D
For me it works faster...
305mbit to 345mbit...
Are you sure your speedtest.net server gives full speed?

I can confirm that I also had a speed hit on V 6.27. BAck to 6.19 all good again. I also noticed a degrading of voip quality. This was on a 1100AH. Personally for me with the config I use 6.19 is still the most stable. It is possibe the upgrade is not taking properly somewhere and a fresh install would be fine but I have not tested this
 
deanMKD1
Member
Member
Posts: 366
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: RouterOS v6.27 released

Thu Feb 26, 2015 3:57 pm

hi guys I have a problem with this can you help me?
I didn't know how to make topic nor did I fine an appropriate place to post it so if you can help me or direct me to the best location I would appreciate it. thanks
first of all after I enable DDNS, in the status section it tells me that:
"DDNS server received request from ip ...(the public ip adress)... but your local ip was 192.168.1.6 (which is my gateway ip). DDNS service might not work."
and I can't ping the DNS name it gives me 100% timeout then I've added this command:"/ip firewall filter add action=accept chain=input disabled=no dst-port=8291 protocol=tcp place-before=0"
but this didnt help either! :|
what should I do?
I have ip cameras in my work place and I want to watch them from home via this feature.
can you help me?
You dont need to add filters in firewall to gain access to your cameras.! In what LAN port is connected your camera? Are you sure that port is properly forwarded?
all cameras plus computers and server are attached to a switch and one cable from switch is attached to ether 2 of my mikrotik and one cable from the dsl modem is attached to the ether1 of my mikrotik.
my internet is working on mikrotik gateway and I can ping 8.8.8.8 from winbox plus I've enabled ip cloud and it gave me the dns but I cant use it, it gave me 100% timeout. so I dont know what to do!
Dude open a new thread, and will found the solution for your problem. This is not right thread for this problem.
 
LaZyLion
newbie
Posts: 32
Joined: Fri May 09, 2014 10:27 am

Re: RouterOS v6.27 released

Fri Feb 27, 2015 11:43 pm

LaZyLion - Since 6.27 "/system package update check-for-updates" is dynamic and gives output to console. That has caused changes.

You can use command like this:
:put ([/system package update check-for-updates once as-value ] -> "current-version")


Great, that gives me the current version, which I can also get using
 :put [/system resource get version ]

But when I attempt to get the latest-version, it just returns a blank.
:put ([/system package update check-for-updates once as-value ] -> "latest-version")

Status isn't very helpful either:
:put ([/system package update check-for-updates once as-value ] -> "status")

resolving upgrade.mikrotik.com

Obviously the command needs time to go online and get the information,
so how do I get it to wait?



Any suggestions on how to get the latest-version without doing
/tool fetch url="something.mikrotik.com/something"
 
Basdno
Member Candidate
Member Candidate
Posts: 119
Joined: Wed Feb 17, 2010 10:11 pm

Re: RouterOS v6.27 released

Sat Feb 28, 2015 3:02 pm

hi guys I have a problem with this can you help me?
I didn't know how to make topic nor did I fine an appropriate place to post it so if you can help me or direct me to the best location I would appreciate it. thanks
first of all after I enable DDNS, in the status section it tells me that:
"DDNS server received request from ip ...(the public ip adress)... but your local ip was 192.168.1.6 (which is my gateway ip). DDNS service might not work."
and I can't ping the DNS name it gives me 100% timeout then I've added this command:"/ip firewall filter add action=accept chain=input disabled=no dst-port=8291 protocol=tcp place-before=0"
but this didnt help either! :|
what should I do?
I have ip cameras in my work place and I want to watch them from home via this feature.
can you help me?

You dont need to add filters in firewall to gain access to your cameras.! In what LAN port is connected your camera? Are you sure that port is properly forwarded?

all cameras plus computers and server are attached to a switch and one cable from switch is attached to ether 2 of my mikrotik and one cable from the dsl modem is attached to the ether1 of my mikrotik.
my internet is working on mikrotik gateway and I can ping 8.8.8.8 from winbox plus I've enabled ip cloud and it gave me the dns but I cant use it, it gave me 100% timeout. so I dont know what to do!

Dude open a new thread, and will found the solution for your problem. This is not right thread for this problem.


This is clearly the wrong topic for this, a new topic under GENERAL f.ex. would probably have been a lot better place for this!
BUT:
The problem is clearly stated in the error message in Mikrotik winbox, and translated it says your Mikrotik router that recieved the dns adress is BEHIND a Firewalled/NATted gateway. Meaning it is not possible to directly connect to that mikrotik-router from the internett.
This again means if you want to use that DNS adress via the internett, I think you will have to make a NAT RULE(s) in your GATEWAY-ROUTER(Probably your DSL modem or something) that sends all requests the gateway recieves from the internet for that dns-adress to be forwarded directly to your Mikrotik router.
This feature works best and easiest if your Mikrotik router IS the Gateway, since it then has direct contact with the internet.
Hope that helps you understand the problem and how to solve it a little better. :)
Cheers
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Sat Feb 28, 2015 3:24 pm

MikroTik 951G-2HnD.

RouterOS v6.23
Image
RouterOS v6.27
Image

Awesome improvement MikroTik! :D
For me it works faster...
305mbit to 345mbit...
Are you sure your speedtest.net server gives full speed?

I can confirm that I also had a speed hit on V 6.27. BAck to 6.19 all good again. I also noticed a degrading of voip quality. This was on a 1100AH. Personally for me with the config I use 6.19 is still the most stable. It is possibe the upgrade is not taking properly somewhere and a fresh install would be fine but I have not tested this
For me 6.27 work faster than 6.24 and previous version used (USED, not only TESTED) on all my network infrastructure
(except for CPE for the huge amount of time to update it all, actually all the CPE are 6.20)

BUT...

the strange thing on pictures:
no one notice the differencies on minutes between the two images?
reboot the machine to start new RouterOS, and start and complete the test again after only 3 minutes???
Or I have misunderstand the images?
I save the picture for not be removed or altered:
4138062096.png
4138069907.png
P.S.
FOR ALL USERS:
I suggest to STOP TO USE SPEEDTEST FOR DO THE TEST (if you not are the owner of the other side...)
Use two other machine to do the test properly. On this way you can also test different packet size and tipology of traffic.
You have never the warranty than the service, on the other side, are overcharged from other users...
I do not think than the various "speedtest" servers have unlimited & warranted bandwidth for you and the all the other users.
Last edited by rextended on Mon Mar 02, 2015 12:40 pm, edited 1 time in total.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Sat Feb 28, 2015 9:13 pm

Where are the seconds? I see 3 minutes difference...
 
Awax
just joined
Posts: 17
Joined: Fri Aug 16, 2013 4:18 pm

Re: RouterOS v6.27 released

Sun Mar 01, 2015 10:55 am

Hi, ceased to work at my RB750G service port PPTP, for resumption of work it is necessary to add the rule:

chain=input action=accept protocol=tcp in-interface=WAN dst-port=1723 log=no log-prefix=""

worked without it earlier

Second question or wish, as you wish. You can write "torrent client" as it is realized in other routers, for installation by a separate package? I would think it very much increased appeal of your product.
 
galaxynet
Long time Member
Long time Member
Posts: 646
Joined: Fri Dec 17, 2004 2:52 pm
Contact:

Re: RouterOS v6.27 released

Sun Mar 01, 2015 12:49 pm

For anyone with the same issues. I have contacted support. I expect to hear from them soon. Below is an excerpt of what was sent.

I have a RB912UAG-5HPnD w/a Mikrotik 802.ac card with ROS 6.27 installed with the wireless-fp package active.

I have attached the autosupout.rif file.

1) After a ping watchdog timeout, the unit will try to reboot, it never makes it. I can only assume from the log that it is a kernel panic that causes the lockup during the reboot process, i.e., shows rebooting because of ping watchdop timeout, logs a few other items then kernel panic during the boot process and stops there.

2) After 3 bandwidth test runs I can no longer access this board from winbox or any other method, telnet/mac-telnet, ssh, it must be powered off/on in order to regain control. It will however pass data through during this time.

3) In the log there are references to kernel panic and script errors. After this last reboot, all files are gone. It will not create a backup file from the file menu in winbox.


I have another board exactly the same except it does not have your 802.11ac card in it. It does however have the wireless-fp package installed and active.

I included the script error message from the log here: 08:57:15 script, error script error: error - contact MikroTik support and send a supout file (2)
 
dada
Member Candidate
Member Candidate
Posts: 245
Joined: Tue Feb 21, 2006 1:44 pm

Re: RouterOS v6.27 released

Sun Mar 01, 2015 1:35 pm

For anyone with the same issues. I have contacted support. I expect to hear from them soon. Below is an excerpt of what was sent.

I have a RB912UAG-5HPnD w/a Mikrotik 802.ac card with ROS 6.27 installed with the wireless-fp package active.
Hi,
do you lose connection to the board through WLAN or through ethernet?
 
User avatar
Maggiore81
Trainer
Trainer
Posts: 559
Joined: Sun Apr 15, 2012 12:10 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Sun Mar 01, 2015 11:22 pm

One bug discovered from6.25.

in the routes list, I have set a route, with "check gateway" option enabled, so if the router is unreachable, it disables the route.
With 6.25 works, with 6.27 doesnt work. Even if the router is unreachable, the route is still up.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re:

Mon Mar 02, 2015 12:59 pm

Where are the seconds? I see 3 minutes difference...
Ok, misspelled and fixed, thanks
 
JackANSI
Frequent Visitor
Frequent Visitor
Posts: 71
Joined: Wed Apr 03, 2013 6:52 pm

Re: RouterOS v6.27 released

Mon Mar 02, 2015 9:37 pm


the strange thing on pictures:
no one notice the differencies on minutes between the two images?
reboot the machine to start new RouterOS, and start and complete the test again after only 3 minutes???
Or I have misunderstand the images?
I save the picture for not be removed or altered:
4138062096.png
4138069907.png
P.S.
FOR ALL USERS:
I suggest to STOP TO USE SPEEDTEST FOR DO THE TEST (if you not are the owner of the other side...)
Use two other machine to do the test properly. On this way you can also test different packet size and tipology of traffic.
You have never the warranty than the service, on the other side, are overcharged from other users...
I do not think than the various "speedtest" servers have unlimited & warranted bandwidth for you and the all the other users.
So you're saying that he couldn't possibly have two devices and just swapped the devices?

Even with one device, 3 minutes for something as simple as a firmware upgrade is quite feasible. Do speed test, click upgrade & reboot, do speed test. Very easy to do in 3 minutes (could also be as much as 3 minutes, 59 seconds since we don't have seconds to refer to).

Two, 3-minute-spaced speedtest.net readings are a little more realistic than a lab/bench test in my opinion. A lab test will only be more consistent over a long time period (i.e. months or years or comparing old generation hardware to new gen without re-benchmarking the old).

I couldn't even push 30% throughput of what the MikroTik benchmarks says my device could do. I put the old Cisco equipment back in place with upgraded interface modules and it handles the load like a champ. The MikroTik boxes are just wireless AP/hotspot for visitors now.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Mon Mar 02, 2015 10:42 pm

So you're saying that he couldn't possibly have two devices and just swapped the devices?
Yes is possible, but the test must be done also crossing version and routeboards, or the test are incomplete...
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Mon Mar 02, 2015 11:52 pm

3 minutes are perfectly enough for running test, upgrade and test again. I don't see any problem with it.
 
galaxynet
Long time Member
Long time Member
Posts: 646
Joined: Fri Dec 17, 2004 2:52 pm
Contact:

Re: RouterOS v6.27 released

Tue Mar 03, 2015 5:57 am

Support -
Just as a follow-up to my ticket, I reverted to just the wireless package (disabled the wireless-fp package) no issues with running bandwidth tests or having the RB get rebooted by the ping watchdog. So it is definitely something with either the .AC card and/or the wireless-fp package.

Thanks.

Thom
 
sparrow
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Wed Jul 11, 2012 10:59 am

Re: RouterOS v6.27 released

Tue Mar 03, 2015 11:08 am

Hi guys, is it normal that over a pppoe-client tunnel using mppe128 encoding I have a lot of rx errors?This on every fw I use
If I disable encoding (mschap1 and mschap2) all goes well without tx/rx errors...I see this behaviour on all client that use MPPE encoding.
error.JPG
You do not have the required permissions to view the files attached to this post.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Tue Mar 03, 2015 11:35 am

LaZyLion - We fixed print function for "/system package update" in latest 6.28rcX versions. Now something like this might work for you:
{
/system package update check-for-updates once
delay 5
:put [/system package update get latest-version ]
}

First function will force RouterOS to check for a latest version. Delay can be reduced but must be longer than time needed to find out latest version. Last function will give latest available version of RouterOS.
 
PastuhMedvedey
newbie
Posts: 40
Joined: Fri Jan 13, 2012 1:42 pm
Location: Ukraine

Re: RouterOS v6.27 released

Thu Mar 05, 2015 3:18 pm

1. Perform the upgrade RB SXT 5HPnD to version 6.27
2. When you try to create a file - Supout.rif CPU usage becomes 100 percent.
3. After creating the file - Supout.rif CPU usage is 100 percent.
1.png
You do not have the required permissions to view the files attached to this post.
 
finalcutroot
newbie
Posts: 45
Joined: Sun Mar 09, 2014 9:36 pm

Re: RouterOS v6.27 released

Sun Mar 08, 2015 2:21 am

this script on (rb750 , os 6.27 , winbox Winbox 3.0rc5) with hotspot cause crash after a while

the crash occur when you go to interface menu



/system scheduler
add interval=1d name=Start on-event=Start policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=dec/07/2014 start-time=07:00:00
add interval=1d name=Stop on-event=Stop policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=dec/07/2014 start-time=16:00:00


/system script
add name=Start policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="interface ethernet enable ether3-slave-local"
add name=Stop policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="interface ethernet disable ether3-slave-local"
 
LaZyLion
newbie
Posts: 32
Joined: Fri May 09, 2014 10:27 am

Re: RouterOS v6.27 released

Sun Mar 08, 2015 9:14 am

Strods
LaZyLion - We fixed print function for "/system package update" in latest 6.28rcX versions. Now something like this might work for you:
{
/system package update check-for-updates once
delay 5
:put [/system package update get latest-version ]
}

First function will force RouterOS to check for a latest version. Delay can be reduced but must be longer than time needed to find out latest version. Last function will give latest available version of RouterOS.

Your suggestion works in 6.26; that's what I've been using. But in 6.27:
[admin@my-router] > /system package update check-for-updates once
  current-version: 6.27
           status: resolving upgrade.mikrotik.com
[admin@my-router] > :put [/system package update get latest-version ]
input does not match any value of value-name

I guess I will wait for 6.28 unless there is another way.

Maybe I can wireshark where routeros pulls the data from then use /tool fetch to get it myself via script. Hmmmm...
 
conecting
newbie
Posts: 37
Joined: Sat Jul 12, 2014 11:38 pm

Re: RouterOS v6.27 released

Sun Mar 08, 2015 9:55 pm

deleted becouse it can not be repeated
Last edited by conecting on Mon Mar 09, 2015 5:39 pm, edited 4 times in total.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Sun Mar 08, 2015 10:12 pm

I see no problem with upnp at 6.27. It works fine with automatic port redirection.
 
conecting
newbie
Posts: 37
Joined: Sat Jul 12, 2014 11:38 pm

Re: RouterOS v6.27 released

Sun Mar 08, 2015 10:41 pm

deleted becouse it can not be repeated
Last edited by conecting on Mon Mar 09, 2015 5:41 pm, edited 2 times in total.
 
conecting
newbie
Posts: 37
Joined: Sat Jul 12, 2014 11:38 pm

Re: RouterOS v6.27 released

Sun Mar 08, 2015 10:50 pm

deleted becouse it can not be repeated
Last edited by conecting on Mon Mar 09, 2015 5:41 pm, edited 2 times in total.
 
rkau045
newbie
Posts: 45
Joined: Mon Jun 25, 2012 9:14 pm

Mon Mar 09, 2015 1:29 am

I fail to see the problem here. The rules are processed in order from top to bottom.

Sent from my LG-D800 using Tapatalk
 
Kadafi
newbie
Posts: 25
Joined: Tue Jan 18, 2011 5:52 pm

Re: RouterOS v6.27 released

Wed Mar 11, 2015 9:06 am

Upgraded CCR-1016 6.12 -> 6.27 (clean configuration) = Dead brick, reboot loop. :?
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6694
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: RouterOS v6.27 released

Wed Mar 11, 2015 10:04 am

Please attach Null Modem cable to your router and provide us with console output that you get from router.
 
Kadafi
newbie
Posts: 25
Joined: Tue Jan 18, 2011 5:52 pm

Re: RouterOS v6.27 released

Wed Mar 11, 2015 10:13 am

Console was non-functional, we tried several cables com@9600/8/1 and com@115200/8/1
Restored with netboot. Clean install 6.27 is ok.
 
ruudux
just joined
Posts: 1
Joined: Wed Mar 11, 2015 10:42 pm

Re: RouterOS v6.27 released

Wed Mar 11, 2015 10:53 pm

Hi,
I ran the upgrade from routeros 5.24 to 6.27. After the reboot, i am only able to login using telnet/ssh but cann't login anymore using the webfig. Allready changed the password, deleted browser cache. Any idea's? Error message after filling in the login form: internal server error. In the log i do not see a login entree using http (ssh is showed normally)
 
finalcutroot
newbie
Posts: 45
Joined: Sun Mar 09, 2014 9:36 pm

Re: RouterOS v6.27 released

Sat Mar 14, 2015 11:00 pm

There is abug drive me crazy

when i add static ip address for int eth1 its gone after tow or three day

and when i add static ip address then goto quick set up , just click apply the added static rout also gone
 
win9x
just joined
Posts: 10
Joined: Tue Dec 23, 2014 8:39 am

Re: RouterOS v6.27 released

Sun Mar 15, 2015 2:01 am

whats better

upgrading directly from 6.24 to 6.27

or upgrade virsion next version :?
6.25 then 6.26 -- 6.27
 
poizzon
Member Candidate
Member Candidate
Posts: 113
Joined: Fri Jun 21, 2013 12:53 pm

Re: RouterOS v6.27 released

Mon Mar 16, 2015 12:19 am

[poi@HotSpotAs] > sys resource print
uptime: 1h48m46s
version: 6.27
build-time: Feb/11/2015 13:24:13
free-memory: 3784.0KiB
total-memory: 32.0MiB
cpu: MIPS 24Kc V7.4
cpu-count: 1
cpu-frequency: 300MHz
cpu-load: 19%
free-hdd-space: 43.6MiB
total-hdd-space: 64.0MiB
write-sect-since-reboot: 21992
write-sect-total: 62832584
bad-blocks: 0.8%
architecture-name: mipsbe
board-name: RB450
platform: MikroTik
[poi@HotSpotAs] >
[poi@HotSpotAs] >
[poi@HotSpotAs] >
[poi@HotSpotAs] > tool profile
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
[poi@HotSpotAs] >
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 26291
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Mon Mar 16, 2015 9:05 am

poizzon, did you do what this log line asked?
 
ATROX
newbie
Posts: 45
Joined: Mon Oct 14, 2013 2:10 pm

Re: RouterOS v6.27 released

Mon Mar 16, 2015 9:41 am

I use about 15 IPsec tunnels
Sometimes IPsec is down. Reboot, kill connetctions and flush SAs do not help. Rarely identify problems. Developers - Check the IPsec please!
Router OS v6.27
CCR1036-12G-4S and RB951G-2HnD
 
User avatar
noyo
Member Candidate
Member Candidate
Posts: 116
Joined: Sat Jan 28, 2012 12:25 am
Location: Mazury - Poland
Contact:

Re: RouterOS v6.27 released

Mon Mar 16, 2015 5:36 pm

Why 6.28rc13 has been removed?
 
pbr3000
Frequent Visitor
Frequent Visitor
Posts: 75
Joined: Fri Jan 08, 2010 7:31 am

Re: RouterOS v6.27 released

Mon Mar 16, 2015 6:34 pm

Why 6.28rc13 has been removed?
+1. Good question... :?
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2394
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: RouterOS v6.27 released

Mon Mar 16, 2015 7:22 pm

Why 6.28rc13 has been removed?
+1. Good question... :?
Good question, but bad topic:
http://forum.mikrotik.com/viewtopic.php?f=21&t=94352
 
poizzon
Member Candidate
Member Candidate
Posts: 113
Joined: Fri Jun 21, 2013 12:53 pm

Re: RouterOS v6.27 released

Mon Mar 16, 2015 11:49 pm

poizzon, did you do what this log line asked?
nop, i can't connet...

after disconnecting access point's and reeboting, i can connect, cleared user manager logs, it seems working for now.
 
JanezFord
Member Candidate
Member Candidate
Posts: 269
Joined: Wed May 23, 2012 10:58 am

Re: RouterOS v6.27 released

Tue Mar 17, 2015 11:43 am

interface,warning 3_WIFI: bridge port received packet with own address as source address, probably loop

why i got a lot of the warming message?how to fix

my ccr1036-12g-4s and a lot of other hardware buy only one week,,how to got Technical Support?
I get lots of this messages on my setup ... I use capsmanv2 with multiple APs configured to provide same said over a building ... this warning pops up when client goes from one AP to another ... sometimes RSTP disables the port long enough to make CAP drop connection due to timeout and loose all of its clients which is annoying.

JF.
 
hzdrus
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Mon May 14, 2012 3:58 pm

Re: RouterOS v6.27 released

Tue Mar 17, 2015 3:17 pm

We found EoIP on 6.27 to be very buggy on CCRs and RB750.

Frames passing through bridge would randomly get corrupted. Removing and adding interface to the bridge may temporarily fix the problem.
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Re: RouterOS v6.27 released

Tue Mar 17, 2015 3:48 pm

Having three mipsbe routers connected to internet:

A: running SSTP server accepting SSTP conections from B and C
B: running SSTP server and client, connecting to A and accepting connections from C
C: running SSTP client and connecting to A and B

A had 6.25, B had 6.18, C had 6.25 and everything worked fine.

Decided to update A from 6.25 to 6.27. Result: Connection from B was fine. C was not able to establish connection.

Decided to update C from 6.25 to 6.27. Result: C is not able to establish connections both to A and B. The disk1 that was working in 6.25 was renamed to disk3 and new disk1 appeared – this should not happen!
And what is more: not running SSTP clients show incoming packets and data in interface overview. How to? Torch is blank…

Reverting both A and C to 6.25 and waiting a correction. After downgrade both A and C to 6.25 everything works correctly like before.

Supout was sent to support, ticket nr. [Ticket#2015021466000104]

To this ticket. I received today info from Mikrotik support that I should have all involved ros devices at the same level (6.27). But the ticket was also about the SSTP not working between two 6.27 devices. So the advice was false.

I found the solution myself: it is the PFS option that is not documented. Correct settings allows communication between both 6.27 as between different versions (for example 6.27-6.18 or 6.27-6.25 in my case).

Mikrotik should take care about the documentation if changing/adding anything!
Just to let you know. This problem was confirmed by mikrotik to be an error finally.
After my further investigation, it is not linked to PFS nor to ros versions mismatch nor to SSTP only, as it also happens to L2TP. The basic of the problem lies in the dynamically assigned IP to the client device that suddenly becomes ivalid without any obvious reason at the clients ip address list.

For those who suffer by this problem like me, you can switch off the sstp/l2tp client, remove the invalid addresses from address lists, reboot the client and switch on the sstp/l2tp client. Then it should behave good at least for some time...

I have got a message that it was passed to programmers for correction. Hope it will be included in 6.28.
 
User avatar
hossain2004a
Member Candidate
Member Candidate
Posts: 247
Joined: Mon Dec 22, 2014 7:34 pm
Location: Iran

Re: RouterOS v6.27 released

Tue Mar 17, 2015 7:56 pm

I'd like to know when will you correct the bug in UM?

which is after you add new langauge and open new windows (e.g. session list) you can not close the new window.
already supports tell me they are working on it.
 
User avatar
gabrielpike
Frequent Visitor
Frequent Visitor
Posts: 86
Joined: Thu Apr 17, 2014 4:17 pm

Re: RouterOS v6.27 released

Thu Mar 19, 2015 3:10 pm

I am not really complaining about 6.27 but after upgrading my core routers I did notice a spike in CPU usage. My reason for updating was to fix the outdated NTP issue. Both routers were running 6.7. In winbox under tools->profile the routers show a higher CPU for both routing and firewall. Again not a complaint just an observation.
 
User avatar
SQx
just joined
Posts: 15
Joined: Mon Oct 12, 2009 11:31 pm

Re: RouterOS v6.27 released

Thu Mar 19, 2015 7:45 pm

Hello,
On RB751u-2HnD with v6.27 not work Health Status and Ethernet 5 error with auto-negotiate, no cable but led is on, (temporary solution - clear option auto-negotiate).
 
User avatar
brauser
Trainer
Trainer
Posts: 32
Joined: Sat Aug 21, 2010 6:36 am
Location: Brazil, SP, Valinhos
Contact:

Re: RouterOS v6.27 released

Thu Mar 19, 2015 11:41 pm

so when all_packages torrent/zip will be back?
+1 for this.
and please, dont repeat this again =]

cheers
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Mar 20, 2015 8:26 am

hossain2004a - Fix for testing is available starting since RouterOS 6.28rc14 version. It will be included in next full release of RouterOS 6.28.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Mar 20, 2015 8:40 am

SQx - We are not being able to reproduce your issue. Could you please send supout file from your device to support@mikrotik.com? Seems like it depends on your configuration. As for a System/Health problem - there is nothing to show in Health for this device. It should be empty.
 
User avatar
SQx
just joined
Posts: 15
Joined: Mon Oct 12, 2009 11:31 pm

Re: RouterOS v6.27 released

Fri Mar 20, 2015 11:36 am

strods, please see [Ticket#2015032066000252]
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1616
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.27 released

Fri Mar 20, 2015 1:50 pm

SQx - reply to this ticket is already sent to you
 
User avatar
SQx
just joined
Posts: 15
Joined: Mon Oct 12, 2009 11:31 pm

Re: RouterOS v6.27 released

Fri Mar 20, 2015 1:51 pm

strods, added new supout.rif, autosupout.rif
 
diode
newbie
Posts: 32
Joined: Sun Sep 13, 2009 8:40 pm

Re: RouterOS v6.27 released

Sat Mar 21, 2015 2:00 pm

hi,

I have a problem starting nstream to be unusable with ac hardware. I have swapped a RB912 with a netbox5 on a place were nstream was working really good (uptimes of clients ofthen 10-20 days before getting a not polled for too long), now it disconnects ALL clients simultainously every hour or so (not polled for too long).

wireless-fp package
a/n mode

please make nstream working stable again, for most of my sites it gives AT LEAST double tcp performace at the client side than NV2. I'm worried now about using the newest hardware as this is even less usable with nstreme than old hardware.
I can't simply downgrade all my clients to just 50% of the bandwidth just for using another protocol.

thanks

ps.: btw I have around 450 mikrotiks in use here, and I'm doing wisp since 2000
 
uldis
MikroTik Support
MikroTik Support
Posts: 3446
Joined: Mon May 31, 2004 2:55 pm

Re: RouterOS v6.27 released

Mon Mar 23, 2015 10:53 am

hi,

I have a problem starting nstream to be unusable with ac hardware. I have swapped a RB912 with a netbox5 on a place were nstream was working really good (uptimes of clients ofthen 10-20 days before getting a not polled for too long), now it disconnects ALL clients simultainously every hour or so (not polled for too long).

wireless-fp package
a/n mode

please make nstream working stable again, for most of my sites it gives AT LEAST double tcp performace at the client side than NV2. I'm worried now about using the newest hardware as this is even less usable with nstreme than old hardware.
I can't simply downgrade all my clients to just 50% of the bandwidth just for using another protocol.

thanks

ps.: btw I have around 450 mikrotiks in use here, and I'm doing wisp since 2000
Please contact support@mikrotik.com so we could check the configuration of the board and setup environment. Then we could try to reproduce this problem in the lab with the AC boards.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6694
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: RouterOS v6.27 released

Mon Mar 23, 2015 12:33 pm

interface,warning 3_WIFI: bridge port received packet with own address as source address, probably loop

why i got a lot of the warming message?how to fix

my ccr1036-12g-4s and a lot of other hardware buy only one week,,how to got Technical Support?
What ports do you have on bridge?
It seems that there is a loop in your network, that is caused by bridged interfaces.
 
mangust
Member Candidate
Member Candidate
Posts: 224
Joined: Thu Jun 14, 2007 11:14 am

Re: RouterOS v6.27 released

Mon Mar 23, 2015 8:31 pm

An error, which I don't know the meaning of, occasionally appears in the log.
I would be greateful if you could tell me if this error occurs due to a configuration fault or if someone is trying to connect but I am unable to see the IP from which it is coming from.
This started happening after upgrade 6.27, but before the update I didn't see the error.
20:32:31 ipsec,error failed to get valid proposal. 
20:32:31 ipsec,error failed to pre-process ph1 packet (side: 1, status 1). 
20:32:31 ipsec,error phase1 negotiation failed. 
20:32:41 ipsec,error failed to get valid proposal. 
20:32:41 ipsec,error failed to pre-process ph1 packet (side: 1, status 1). 
20:32:41 ipsec,error phase1 negotiation failed. 
20:32:51 ipsec,error failed to get valid proposal. 
20:32:51 ipsec,error failed to pre-process ph1 packet (side: 1, status 1). 
20:32:51 ipsec,error phase1 negotiation failed. 
20:33:01 ipsec,error failed to get valid proposal. 
20:33:01 ipsec,error failed to pre-process ph1 packet (side: 1, status 1). 
20:33:01 ipsec,error phase1 negotiation failed.
20:33:05 ipsec,error phase1 negotiation failed due to time up X.X.X.X[500]<=>Z.Z.Z.Z[500] 5654bdb3a0805b43:00000000000000 
20:33:05 ipsec,error failed to get valid proposal. 
20:33:05 ipsec,error failed to pre-process ph1 packet (side: 1, status 1). 
20:33:05 ipsec,error phase1 negotiation failed. 

I have exactly the same issue with IPSEC tunnel between 6.25 & 6.27.
IS it me , or i shoud try to downgrade to 6.25 ?
 
DjM
Member Candidate
Member Candidate
Posts: 114
Joined: Sun Dec 27, 2009 2:44 pm

Re: RouterOS v6.27 released

Tue Mar 24, 2015 9:02 am

Just to let you know. This problem was confirmed by mikrotik to be an error finally.
After my further investigation, it is not linked to PFS nor to ros versions mismatch nor to SSTP only, as it also happens to L2TP. The basic of the problem lies in the dynamically assigned IP to the client device that suddenly becomes ivalid without any obvious reason at the clients ip address list.

For those who suffer by this problem like me, you can switch off the sstp/l2tp client, remove the invalid addresses from address lists, reboot the client and switch on the sstp/l2tp client. Then it should behave good at least for some time...

I have got a message that it was passed to programmers for correction. Hope it will be included in 6.28.
Do you have any SNAT on the network path from SSTP client to SSTP server which is configured out of SSTP client?

SSTP client ---> some router with SNAT ---> SSTP server

I have the same issue and instead of disable/remove/reboot I have found another workaround:

1) disable SSTP client interface
2) remove invalid IP address (if there is still any)
3) wait around 30s when the connection is removed from IP conntrack or manually remove it
4) enable the SSTP client interface and it is working

Please let me know if this workaround working also for you.
 
tgyula
just joined
Posts: 2
Joined: Mon Aug 13, 2012 9:04 pm

Re: RouterOS v6.27 released

Wed Mar 25, 2015 7:28 pm

Hey, can we please have the .torrent files back for ALL RouterOS. I don't believe that I am the only one that uses the .torrent to download RouterOS. I myself support multiple different hardware flavors and to download each file separately can be a pain.

Thanks!

Not only are you! Mikrotik: please come back torrent download!
 
mars
Member Candidate
Member Candidate
Posts: 228
Joined: Sun Mar 14, 2010 1:43 pm

Re: RouterOS v6.27 released

Fri Mar 27, 2015 5:58 pm

Hey, can we please have the .torrent files back for ALL RouterOS. I don't believe that I am the only one that uses the .torrent to download RouterOS. I myself support multiple different hardware flavors and to download each file separately can be a pain.

Thanks!

Not only are you! Mikrotik: please come back torrent download!

+10000.....
 
alobci
just joined
Posts: 1
Joined: Sun Apr 05, 2015 11:47 pm

Re: RouterOS v6.27 released

Mon Apr 06, 2015 12:04 am

I cannot access to user manager on mikrotik after i turn off the router bord i turn it on then its not working maybe its damage what can i do ?
 
steen
Member
Member
Posts: 475
Joined: Sat Oct 23, 2010 2:15 am
Location: Sweden
Contact:

Re: RouterOS v6.27 released

Mon Apr 06, 2015 9:23 am

Hello Folks!

Trying to upgrade CCR1016 from 6.24 to 6.27 failed due to kernel panic, and it reverted back to 6.24 again and support was generated. I put up a support case to MT with support file.

Anyone who have seen this and or know how to mitigate it ?
 
TomosRider
Member Candidate
Member Candidate
Posts: 209
Joined: Thu Nov 20, 2014 1:51 pm

Re: RouterOS v6.27 released

Tue Apr 07, 2015 10:03 am

Steen, did you try Netinstall or just copying .npk files?
For me, 6.27 is a good release. I have it running on couple of routerboards and on those never had kernel panics, sudden reboots or resets. Everything that i have set on earlier releases (5.x) working like a charm. Big plus from me!
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: RouterOS v6.27 released

Tue Apr 07, 2015 2:58 pm

Please put a disclaimer inside 6.27/6.28:

"ac" models wlan work only with "wireless-fp" package enabled.
using "wireless" package on ac models cause wlan to not be recognized from the system.

RB922UAGS-5HPacD S.N.:5F820473960B
 
steen
Member
Member
Posts: 475
Joined: Sat Oct 23, 2010 2:15 am
Location: Sweden
Contact:

Re: RouterOS v6.27 released

Tue Apr 07, 2015 9:14 pm

Steen, did you try Netinstall or just copying .npk files?
For me, 6.27 is a good release. I have it running on couple of routerboards and on those never had kernel panics, sudden reboots or resets. Everything that i have set on earlier releases (5.x) working like a charm. Big plus from me!
I did copying the .npk file as always, I have no way to do netinstall from remote location where I am some 500km from the device. :-)
 
TomosRider
Member Candidate
Member Candidate
Posts: 209
Joined: Thu Nov 20, 2014 1:51 pm

Re: RouterOS v6.27 released

Wed Apr 08, 2015 10:26 am

I had cases where i copy .npk files and then after reboot, device simply wont upgrade.Copy again in files dir and then copy to packages directorium...worked for me once. First mark old npk's for uninstall, ofc
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: RouterOS v6.27 released

Wed Apr 08, 2015 12:20 pm

I had cases where i copy .npk files and then after reboot, device simply wont upgrade
And the reason is in Log, isn't it? :)
 
TomosRider
Member Candidate
Member Candidate
Posts: 209
Joined: Thu Nov 20, 2014 1:51 pm

Re: RouterOS v6.27 released

Wed Apr 08, 2015 11:47 pm

Well, yes, but im always on hurry so i skipped checking log.. :)
 
locodog
Frequent Visitor
Frequent Visitor
Posts: 63
Joined: Sun Apr 12, 2015 4:00 am

Re: RouterOS v6.27 released

Sun Apr 12, 2015 4:10 am

There seems to be a problem with RB1100AHx when running hotspot and PPPoE at the same time. Users are unable to reach certain websites. On every other version and model of RB with same settings everything works good. Also, when RB1100AHx is running hotspot OR PPPoE, works good, but when it has both there is problem.
 
User avatar
StubArea51
Trainer
Trainer
Posts: 1739
Joined: Fri Aug 10, 2012 6:46 am
Location: stubarea51.net
Contact:

Re: RouterOS v6.27 released

Sun Apr 12, 2015 8:45 am

Hello Folks!

Trying to upgrade CCR1016 from 6.24 to 6.27 failed due to kernel panic, and it reverted back to 6.24 again and support was generated. I put up a support case to MT with support file.

Anyone who have seen this and or know how to mitigate it ?
If you can netinstall the router I would do that. If not, you might try upgrading to 6.25 and then go to 6.27.
 
ennnot
just joined
Posts: 5
Joined: Sat Feb 07, 2015 3:20 pm

Re: RouterOS v6.27 released

Tue Apr 14, 2015 12:02 pm

Hi!
I'm using MRTG (RB450G) with 6.27. The are some L2TP-servers. Edit comment for L2TP-interface cause a restart of L2TP-server. Is it normal process?
 
TomosRider
Member Candidate
Member Candidate
Posts: 209
Joined: Thu Nov 20, 2014 1:51 pm

Re: RouterOS v6.27 released

Tue Apr 14, 2015 12:42 pm

Simple...no.
 
killersoft
Member Candidate
Member Candidate
Posts: 235
Joined: Mon Apr 11, 2011 2:34 pm
Location: Victoria, Australia

Re: RouterOS v6.27 released

Sat Apr 18, 2015 3:47 pm

Just wondering if anyone else is suffering a failure of the "Reset Counters" in the Interface/Traffic TAB.
By where as an example in the Tx/Rx Bytes( and in my instance this interface connections to my cable modem ) and in my case shows 32Gb TX and 31Gb Rx respectively. But when I click on "Reset Counters" this does not clear to 0 as I would expect it to..

I am running a RB750G with 6.27 and v3.22 Firmware... Anyone else noticing this ?
 
0ldman
Forum Guru
Forum Guru
Posts: 1465
Joined: Thu Jul 27, 2006 5:01 am

Re: RouterOS v6.27 released

Sun Apr 19, 2015 3:22 am

I've got the same network loop error. There is no loop. The network has been in operation in this config for nearly 4 years, then 2PM this afternoon it just stopped.
 
0ldman
Forum Guru
Forum Guru
Posts: 1465
Joined: Thu Jul 27, 2006 5:01 am

Re: RouterOS v6.27 released

Mon Apr 20, 2015 5:21 pm

I figured it out. DDoS attack was spoofing MAC addresses in the network causing the equipment to falsely detect a loop.
 
Habib89
just joined
Posts: 1
Joined: Fri Apr 24, 2015 1:14 am

Re: RouterOS v6.27 released

Fri Apr 24, 2015 1:59 am

hi
after updating to 6.27 the internet connection become very slow and some websites doesn't even open after 10 or 20 minutes,
it was working fine in 6.14 version.

is there any solution?
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8709
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: RouterOS v6.27 released

Tue Apr 28, 2015 4:08 pm

it depends on your setup, I think :)
 
sattlink
just joined
Posts: 1
Joined: Fri Jun 05, 2015 11:18 pm

Re: RouterOS v6.27 released

Mon Jun 08, 2015 6:17 am

please help me, someone can tell me where I find the download version 6.27 parael npk ccr1036-12G -4S
 
jebz
Member
Member
Posts: 366
Joined: Sun May 01, 2011 12:03 pm
Location: Australia

Re: RouterOS v6.27 released

Mon Jun 08, 2015 1:58 pm

please help me, someone can tell me where I find the download version 6.27 parael npk ccr1036-12G -4S
Try -
http://download2.mikrotik.com/routeros/ ... e-6.27.npk
 
tapsin
just joined
Posts: 6
Joined: Wed Feb 05, 2014 6:56 pm

Re: RouterOS v6.27 released

Mon Jul 27, 2015 11:04 am

 
Royalsaleh1
just joined
Posts: 2
Joined: Mon Sep 21, 2015 9:30 pm

Re: RouterOS v6.27 released

Mon Sep 21, 2015 10:09 pm

loop probably problems i need help thanks
 
Royalsaleh1
just joined
Posts: 2
Joined: Mon Sep 21, 2015 9:30 pm

Re: RouterOS v6.27 released

Mon Sep 21, 2015 10:23 pm

hello !
I have a problem
router rb 1100
internet in
broadband
out
hotspot
output ip 10.10.10.10
i have bridge
i have ip back
10.0.0.1 on bridge client dhcp
log : ether 6 loop probably
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: efka, flapviv, K0NCTANT1N and 25 guests