Community discussions

 
keema
Frequent Visitor
Frequent Visitor
Posts: 62
Joined: Thu Nov 06, 2014 12:54 pm

Re: RouterOS v6.28 released

Tue Apr 21, 2015 11:31 am

We do not offer torrent download directly from our servers any more. You can download this torrent, download RouterOS files, associate them and then share with others.
One word...PRO! You can download, you can do this, you can do that...what can you do? Aperently not combined torrent package which should be easy to do for a user to share with others, but impossible for Mikrotik?
 
alexspils
Member Candidate
Member Candidate
Posts: 174
Joined: Thu Jun 05, 2008 8:57 pm

Re: RouterOS v6.28 released

Tue Apr 21, 2015 12:54 pm

We found a bug.We Have router with vrrp on it.It is master.When we do /ip neighbor discovery set 0-5 discover=yes or no vrrp becomes backup and after some time returns to master
 
urknall
just joined
Posts: 22
Joined: Fri Aug 22, 2014 3:27 pm

Re: RouterOS v6.28 released

Tue Apr 21, 2015 1:35 pm

@strods:

I think my problem directly after the update is related to the new romon feature maybe somehow:
10.10.10.1_cpu-day.png
See the two peaks in CPU Usage right after the update, nothing was changed in the config. Then i read about the new romon feature, activated it and deactivated it again and also high cpu usage was the result. That could be related to my problem somehow, though i did not initially made some changes to the config after the update, when theses problems appeared. Now the romon feature is activated again, to prevent high cpu usage...

Will investigate more and make a support ticket.
You do not have the required permissions to view the files attached to this post.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.28 released

Tue Apr 21, 2015 1:42 pm

alexspils - That is true, but this state should be changed back to master even within one second. Do you need to wait longer?
urknall - Fix for this RoMON CPU usage issue will be included for testing in 6.29 release candidate versions.
 
ittcoin
just joined
Posts: 5
Joined: Fri Apr 10, 2015 9:03 am

Re: RouterOS v6.28 released

Tue Apr 21, 2015 3:36 pm

Problems with CAPsMAN with the hAP lite as APs, I've differents APs with the same configuration working together (mAP and RB751) and working ok with 6.28, hAP lite not working :-(
 
kristaps
Member Candidate
Member Candidate
Posts: 272
Joined: Mon Jan 27, 2014 1:37 pm

Re: RouterOS v6.28 released

Tue Apr 21, 2015 3:42 pm

ROS 6.28 seems to break the WiFi setup on my OmniTIK UPA-5HnD.
1 ap bridge with 2 virtual APs (a/n, 20/40MHz channel). Client is a Nanostation M5 (I am using wireless-fp).
Works flawless in 6.27.
After upgrade the client does not connect.
Downgrade to 6.27 fixes the problem.
Hi, could you please send supouts from both versions to support@mikrotik.com ?
 
skibi82
newbie
Posts: 42
Joined: Fri Mar 22, 2013 7:09 pm

Re: RouterOS v6.28 released

Tue Apr 21, 2015 5:05 pm

Critical bug in 6.28
After updating to version 6.28 is the problem of detection ipsec esp.

Before that could properly be described in Mangle encrypted traffic Packet Markt: IPSEC and then on filter rule i culd filter IP inside the ipsec tunnel

Since version 6.28 does not have the capability of this.
Because the above error stanol traffic on one of the VPN concentrator.
Please fix it as fast as possible

1 Rule on mangle

/ip firewall mangle
add action=mark-packet chain=input comment=IPSEC new-packet-mark=\
ipsec-encrypted passthrough=no protocol=ipsec-esp


2 Rule on forward
/ip firewall filter
add action=passthrough chain=forward comment=IPSEC packet-mark=ipsec-encrypted
wtf.png
You do not have the required permissions to view the files attached to this post.
 
leroylim
just joined
Posts: 21
Joined: Tue Aug 07, 2012 7:57 am

Re: RouterOS v6.28 released

Tue Apr 21, 2015 5:07 pm

I am currently on ROS 6.28 RC20. I am having an issue when upgrading to ROS 6.28 that my connectivity totally breaks.

Let me describe the issue I am having.

Currently I am using a CCR1036-8G-2S+ with a bonded link using 2 1 Gbps ports using LACP to my switch.
Over the bonded link, I have 3 VLANs, VLAN 1 - LAN, VLAN 5 - WAN1, VLAN 6 - WAN2.

In ROS 6.28 RC20, everything works fine, traffic for LAN over VLAN 1, traffic for 2 WANs with DHCP client over VLANs 5 and 6.

But when I upgrade to ROS 6.28, connectivity is totally lost, as in, I cannot ping anything over VLAN 1, when looking in Winbox -> Interfaces, I can see VLAN 1 transmitting, but never receiving anything in return. VLANs 5 and 6 DHCP client is also searching with no avail.

I have tried upgrading to ROS 6.28 twice, and rolling back to 6.28 RC 20 as connectivity was totally broken.
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1210
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: RouterOS v6.28 released

Tue Apr 21, 2015 8:23 pm

ROS 6.28 seems to break the WiFi setup on my OmniTIK UPA-5HnD.
1 ap bridge with 2 virtual APs (a/n, 20/40MHz channel). Client is a Nanostation M5 (I am using wireless-fp).
Works flawless in 6.27.
After upgrade the client does not connect.
Downgrade to 6.27 fixes the problem.
Hi, could you please send supouts from both versions to support@mikrotik.com ?
Sorry for the alert.
It was a strange power failure coincidence on the client side, which resolved at the same time as my downgrade (found out today) and I never checked connectivity before the upgrade.
Upgraded again to 6.28 and it works without any issues.
Last edited by docmarius on Tue Apr 21, 2015 8:40 pm, edited 1 time in total.
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
skl
just joined
Posts: 6
Joined: Tue Jan 17, 2012 8:15 pm

Re: RouterOS v6.28 released

Tue Apr 21, 2015 8:31 pm

After update RB941-2nd from 6.27 to 6.28 it is no more possible to connect by winbox3rc6 (was working fine until update). Winbox closes right immediatelly after writing "downloading plugins".
The same with winbox3rc9 (actually latest).
The main website of router does not contain any downloadable winbox application. ( error 404: file not found when going to http://router.ip/winbox/winbox.exe)
Winbox 2.2.18 of course does not work with smips by any chance since beginning (was never officially told by Mikrotik in advance in documentation or product page but it is how it is).

There is no winbox that could log into it.

This and other posts above are putting my expectations back. I thought recently that mikrotik changed at least a bit their approach to software development management but it is not obviously true. I am unhappy of that.
Check "open in new window", works like a charm ;)
 
RafGan
newbie
Posts: 29
Joined: Mon Jun 06, 2011 6:17 pm
Location: Poland / Silesia

Re: RouterOS v6.28 released

Wed Apr 22, 2015 12:51 am

RafGan - Normis is at MUM. Do not worry - he will be back soon :D[/quote]

Now I don't worry, I'm happy :D
Best Regards,
Raf G
 
TomosRider
Member Candidate
Member Candidate
Posts: 202
Joined: Thu Nov 20, 2014 1:51 pm

Re: RouterOS v6.28 released

Wed Apr 22, 2015 10:02 am

I am currently on ROS 6.28 RC20. I am having an issue when upgrading to ROS 6.28 that my connectivity totally breaks.

Let me describe the issue I am having.

Currently I am using a CCR1036-8G-2S+ with a bonded link using 2 1 Gbps ports using LACP to my switch.
Over the bonded link, I have 3 VLANs, VLAN 1 - LAN, VLAN 5 - WAN1, VLAN 6 - WAN2.

In ROS 6.28 RC20, everything works fine, traffic for LAN over VLAN 1, traffic for 2 WANs with DHCP client over VLANs 5 and 6.

But when I upgrade to ROS 6.28, connectivity is totally lost, as in, I cannot ping anything over VLAN 1, when looking in Winbox -> Interfaces, I can see VLAN 1 transmitting, but never receiving anything in return. VLANs 5 and 6 DHCP client is also searching with no avail.

I have tried upgrading to ROS 6.28 twice, and rolling back to 6.28 RC 20 as connectivity was totally broken.
Leroylim, can you tell me, do you have direct access to your equipment or is it on remote site?
You can check if you have local access by logging into router to see if there is problem with interface mismatch.
For example, after upgrade, eth5 became eth1 and so on. In this case, you must manually adjust interface numbers.
 
JanezFord
Member Candidate
Member Candidate
Posts: 262
Joined: Wed May 23, 2012 10:58 am

Re: RouterOS v6.28 released

Wed Apr 22, 2015 10:18 am

I upraded about 15 devices and only issues so far are lost graphing data on rb800 (but not on two rb850gx2 so I guess it's not powerpc related) and one hung rb912-2hnd which had to be netinstalled (the other identical rb912-2hnd with identical config upgraded ok). I run ipsec, ospf over ipip and gre, l2tp, capsmanv2, nat and so far it seems OK. No high cpu.

JF.
 
User avatar
noyo
Member Candidate
Member Candidate
Posts: 113
Joined: Sat Jan 28, 2012 12:25 am
Location: Mazury - Poland
Contact:

Re: RouterOS v6.28 released

Wed Apr 22, 2015 10:24 am

Does in v6.28 "auto-before-reset.backup" is encrypted?
Because v6.27file is not encrypted and is not dangerous.
 
jarda
Forum Guru
Forum Guru
Posts: 7601
Joined: Mon Oct 22, 2012 4:46 pm

Re: RouterOS v6.28 released

Wed Apr 22, 2015 11:06 am

After update RB941-2nd from 6.27 to 6.28 it is no more possible to connect by winbox3rc6 (was working fine until update). Winbox closes right immediatelly after writing "downloading plugins".
The same with winbox3rc9 (actually latest).
The main website of router does not contain any downloadable winbox application. ( error 404: file not found when going to http://router.ip/winbox/winbox.exe)
Winbox 2.2.18 of course does not work with smips by any chance since beginning (was never officially told by Mikrotik in advance in documentation or product page but it is how it is).

There is no winbox that could log into it.

This and other posts above are putting my expectations back. I thought recently that mikrotik changed at least a bit their approach to software development management but it is not obviously true. I am unhappy of that.
Check "open in new window", works like a charm ;)
Unfortunaelly not for me. Even after downgrade back to 6.27 I am not able to connect by winbox3rc9 or winbox3rc6. Strange. Even not after power cycle...
 
Karlsonas
just joined
Posts: 4
Joined: Tue Apr 14, 2015 10:31 am

Re: RouterOS v6.28 released

Wed Apr 22, 2015 11:29 am

Unfortunaelly not for me. Even after downgrade back to 6.27 I am not able to connect by winbox3rc9 or winbox3rc6. Strange. Even not after power cycle...
I had same problem, and solved by logging another system user, so problem is in winbox dll cache, we need to find them and clear to winbox work!
 
jarda
Forum Guru
Forum Guru
Posts: 7601
Joined: Mon Oct 22, 2012 4:46 pm

Re: RouterOS v6.28 released

Wed Apr 22, 2015 2:21 pm

Well, I have just created a new "full" user and tried to log in, both with 3RC6 and 3RC9, both with "open in new window" on and off. No luck.
 
Juta
just joined
Posts: 8
Joined: Thu Apr 22, 2010 12:04 pm

Re: RouterOS v6.28 released

Wed Apr 22, 2015 2:39 pm

Problem with e-mail client still exists.
If you use TLS then the second EHLO, which is normally issued after STARTTLS, is malformed and rejected by postfix with error "Helo command rejected: invalid ip address"
 
User avatar
tomaskir
Trainer
Trainer
Posts: 1110
Joined: Sat Sep 24, 2011 2:32 pm
Location: Slovakia

Re: RouterOS v6.28 released

Wed Apr 22, 2015 2:40 pm

Problem with e-mail client still exists.
If you use TLS then the second EHLO, which is normally issued after STARTTLS, is malformed and rejected by postfix with error "Helo command rejected: invalid ip address"
Did you report this to support@mikrotik.com?
Unimus - configuration management, automation and backup solution
Mass Config Push, network-wide RouterOS upgrades, and more!
 
Juta
just joined
Posts: 8
Joined: Thu Apr 22, 2010 12:04 pm

Re: RouterOS v6.28 released

Wed Apr 22, 2015 2:50 pm

Did you report this to support@mikrotik.com?
Just did it.
 
leroylim
just joined
Posts: 21
Joined: Tue Aug 07, 2012 7:57 am

Re: RouterOS v6.28 released

Wed Apr 22, 2015 4:41 pm

I am currently on ROS 6.28 RC20. I am having an issue when upgrading to ROS 6.28 that my connectivity totally breaks.

Let me describe the issue I am having.

Currently I am using a CCR1036-8G-2S+ with a bonded link using 2 1 Gbps ports using LACP to my switch.
Over the bonded link, I have 3 VLANs, VLAN 1 - LAN, VLAN 5 - WAN1, VLAN 6 - WAN2.

In ROS 6.28 RC20, everything works fine, traffic for LAN over VLAN 1, traffic for 2 WANs with DHCP client over VLANs 5 and 6.

But when I upgrade to ROS 6.28, connectivity is totally lost, as in, I cannot ping anything over VLAN 1, when looking in Winbox -> Interfaces, I can see VLAN 1 transmitting, but never receiving anything in return. VLANs 5 and 6 DHCP client is also searching with no avail.

I have tried upgrading to ROS 6.28 twice, and rolling back to 6.28 RC 20 as connectivity was totally broken.
Leroylim, can you tell me, do you have direct access to your equipment or is it on remote site?
You can check if you have local access by logging into router to see if there is problem with interface mismatch.
For example, after upgrade, eth5 became eth1 and so on. In this case, you must manually adjust interface numbers.

Weird issue I had. The ports were still the same. One workaround that worked. I switched the protcol on my bridge-local from RSTP to STP. And then I changed my switch that I'm doing LACP from to STP too from RSTP.
 
jarda
Forum Guru
Forum Guru
Posts: 7601
Joined: Mon Oct 22, 2012 4:46 pm

Re: RouterOS v6.28 released

Wed Apr 22, 2015 5:00 pm

After update RB941-2nd from 6.27 to 6.28 it is no more possible to connect by winbox3rc6 (was working fine until update). Winbox closes right immediatelly after writing "downloading plugins".
The same with winbox3rc9 (actually latest).
The main website of router does not contain any downloadable winbox application. ( error 404: file not found when going to http://router.ip/winbox/winbox.exe)
Winbox 2.2.18 of course does not work with smips by any chance since beginning (was never officially told by Mikrotik in advance in documentation or product page but it is how it is).

There is no winbox that could log into it.

This and other posts above are putting my expectations back. I thought recently that mikrotik changed at least a bit their approach to software development management but it is not obviously true. I am unhappy of that.
Check "open in new window", works like a charm ;)
Unfortunaelly not for me. Even after downgrade back to 6.27 I am not able to connect by winbox3rc9 or winbox3rc6. Strange. Even not after power cycle...
Unfortunaelly not for me. Even after downgrade back to 6.27 I am not able to connect by winbox3rc9 or winbox3rc6. Strange. Even not after power cycle...
I had same problem, and solved by logging another system user, so problem is in winbox dll cache, we need to find them and clear to winbox work!
Well, I have just created a new "full" user and tried to log in, both with 3RC6 and 3RC9, both with "open in new window" on and off. No luck.

Finally I have it. I needed to delete relevant directories in C:\Users\MyName\AppData\Roaming\Mikrotik\Winbox\ and relevant files in \sessions\ subdirectory. Shame on Mikrotik that the files are not overwritten or deleted or versioned on error automatically!
 
jarda
Forum Guru
Forum Guru
Posts: 7601
Joined: Mon Oct 22, 2012 4:46 pm

Re: RouterOS v6.28 released

Wed Apr 22, 2015 5:08 pm

When disabling romon on 941-2nd, the cpu goes to 100% (shared between management and unclassified). When enabled back, the cpu goes to zero back. Disabling - 100%, enabling 0%, and so on...

Reboot helps.
 
raffav
Member Candidate
Member Candidate
Posts: 278
Joined: Wed Oct 24, 2012 4:40 am

Re: RouterOS v6.28 released

Wed Apr 22, 2015 8:45 pm

Hello

the script to auto upgrade that is ins the wiki is not working any more
/system package update
check-for-updates
:delay 1s;
:if ( [get current-version] != [get latest-version]) do={ upgrade }
since i dont user for a while i dont know tell from witch version it stoped working i think on 6.27



when i run it on the terminal i get this and i know that the code worked in early version of ROS
any suggestion ?
[Vaselli@Raffa's MK] >
current-version: 6.28
latest-version: 6.28
status: System is already up to date
-- [Q quit|D dump|C-z pause]
latest-version: 6.28
status: System is already up to date
-- [Q quit|D dump|C-z pause]
-- [Q quit|D dump|C-z pause]
status: resolving upgrade.mikrotik.com
-- [Q quit|D dump|C-z pause]
 
alexspils
Member Candidate
Member Candidate
Posts: 174
Joined: Thu Jun 05, 2008 8:57 pm

Re: RouterOS v6.28 released

Wed Apr 22, 2015 10:31 pm

[quote="strods"]alexspils - That is true, but this state should be changed back to master even within one second. Do you need to wait longer?
winbox disconnect from router when vrrp changes state from backup to master.I never noticed before that when i change discovery interface settings something changes in vrrp
 
igb
just joined
Posts: 7
Joined: Fri Aug 29, 2014 7:05 pm

Re: RouterOS v6.28 released

Wed Apr 22, 2015 10:45 pm

Rapid reboot loop, out of memory, 6.28. Fine with 6.27.

System initially ran for about 30 minutes, but then entered reboot loop with a time constant of less than 30s. I managed to scp the 6.27 .npk package in during one brief window and then run "/system package downgrade" in the next to recover the router.

apr/22/2015 20:38:23 system,error,critical System rebooted because of kernel failure
apr/22/2015 20:38:23 system,error,critical Out of memory condition was detected
apr/22/2015 20:38:23 system,error,critical router was rebooted without proper shutdown
apr/22/2015 20:40:09 system,error,critical router was rebooted without proper shutdown by watchdog timer
apr/22/2015 20:41:19 system,error,critical System rebooted because of kernel failure
apr/22/2015 20:41:19 system,error,critical Out of memory condition was detected
apr/22/2015 20:41:19 system,error,critical router was rebooted without proper shutdown

RB2011 uAS. I don't think I'm doing anything exotic: prosumer PPPoE, IPv6, some queue prioritisation, nothing very complex.
 
User avatar
payday
Member Candidate
Member Candidate
Posts: 233
Joined: Thu Aug 16, 2012 11:05 pm

Re: RouterOS v6.28 released

Wed Apr 22, 2015 10:59 pm

Hello

the script to auto upgrade that is ins the wiki is not working any more
/system package update
check-for-updates
:delay 1s;
:if ( [get current-version] != [get latest-version]) do={ upgrade }
since i dont user for a while i dont know tell from witch version it stoped working i think on 6.27



when i run it on the terminal i get this and i know that the code worked in early version of ROS
any suggestion ?
[Vaselli@Raffa's MK] >
current-version: 6.28
latest-version: 6.28
status: System is already up to date
-- [Q quit|D dump|C-z pause]
latest-version: 6.28
status: System is already up to date
-- [Q quit|D dump|C-z pause]
-- [Q quit|D dump|C-z pause]
status: resolving upgrade.mikrotik.com
-- [Q quit|D dump|C-z pause]
Use command: check-for-updates once. It works this way from 6.28 but not on older versions.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 2946
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: RouterOS v6.28 released

Thu Apr 23, 2015 3:28 am

I just finish upgrade all my "core" routers for BGP.
Finally I can upgrade my 4 pppoe servers from 6.7 to 6.28 directly.
Two bug introduced on 6.8 are finally fixed (pppoe & EoIP mtu/mrru problems with fragmented packets).

I do not have any problem.

but for security I do:
/romon port remove [find]
Ciao Rextended non hai avuto nessun problema con ospf come qualcuno scriveva su?

Hi Rextended have you had any problem with ospf as written by someone?
Hi, I not use MPLS and OSPF or any other routing protocol,
except BGP, VRRP and "pure Routing" for failover and routing.
Because, for my network topology, other protocols over what I'm using, do not have any sense.
I'm Italian, not English. Sorry for my imperfect grammar.
 
gerencia@e-digitales.com
Member Candidate
Member Candidate
Posts: 106
Joined: Sat Feb 25, 2006 9:01 pm
Location: Sydney Au

Issue upgrading to ver 6.28

Thu Apr 23, 2015 3:32 am

Hi all,
I'm no t really sure whether this is a version issue but i have upgraded 4 units so far to this ver. and 3 out of four never came back from the upgrade, all are remote units so now i have to go and check them up.

Has any one had this tiny problem upgrading to this new release?
thanks
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 2946
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: RouterOS v6.28 released

Thu Apr 23, 2015 4:13 am

RomanHujer - Please use version higher than 6.25 on your routers with SSTP configuration. Also make sure that PFS is either enabled or disabled on both endpoints of connection;
It is not possible to upgrade all my devices at one time. SSTP Client from Small and Home Office are located throughout the world (Hong Kong, Dubai, USA, Canada, Czech Republic ..). :(
If you want take the risk of the update, must exist some benefit.
If all is working, why you want update?
I'm Italian, not English. Sorry for my imperfect grammar.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 2946
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: RouterOS v6.28 released

Thu Apr 23, 2015 4:19 am

@strods:

I think my problem directly after the update is related to the new romon feature maybe somehow:
10.10.10.1_cpu-day.png
See the two peaks in CPU Usage right after the update, nothing was changed in the config. Then i read about the new romon feature, activated it and deactivated it again and also high cpu usage was the result. That could be related to my problem somehow, though i did not initially made some changes to the config after the update, when theses problems appeared. Now the romon feature is activated again, to prevent high cpu usage...

Will investigate more and make a support ticket.
/romon port remove [find]
I'm Italian, not English. Sorry for my imperfect grammar.
 
User avatar
Bigfoot
Frequent Visitor
Frequent Visitor
Posts: 76
Joined: Sat Jan 15, 2011 10:41 am
Location: South Africa

Re: RouterOS v6.28 released

Thu Apr 23, 2015 7:02 am

LCD Page List not working, can not add interfaces to the LCD Page List and the Max Speed can not be set.
You do not have the required permissions to view the files attached to this post.
 
Abdock
Member Candidate
Member Candidate
Posts: 245
Joined: Sun Sep 25, 2005 10:50 pm

Re: RouterOS v6.28 released

Thu Apr 23, 2015 8:35 am

After the upgrade most of my links went out, although it said 1 neighbor on each side, but the traffic would not flow. I do not see anything concerning OSPF on the change log from .27 to .28 but this one broke the ospf, i had to downgrade and for some routers to come back online had to restart manually.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.28 released

Thu Apr 23, 2015 8:37 am

alexspils - It will be fixed in 6.29
jarda - RoMON CPU load issue will also be fixed in 6.29 version
igb - Please send e-mail to support@mikrotik.com with description of problem and include supout files. We will check what is going on there
payday - Now check for update is dynamic. If you run "/system package update upgrade", then router will be upgraded if new version is available. If it is not then it will not do anything. Before running this command you need to run "/system package update check-for-update". Basically this script:
{
/system package update check-for-update once
/system package update upgrade once
}
gerencia@e-digitales.com - Please write to support. Name versions from which you did the upgrade and provide supout file so we can check if we can reproduce it locally
Bigfoot - Timeout and Max Speed can be configured under "LCD Interface" menu. Not under "LCD page" menu
Abdock - Please write to support. Provide supout file so we can check if we can reproduce it locally.
 
RomanHujer
just joined
Posts: 4
Joined: Thu Apr 02, 2015 10:29 pm

Re: RouterOS v6.28 released

Thu Apr 23, 2015 9:50 am

RomanHujer - Please use version higher than 6.25 on your routers with SSTP configuration. Also make sure that PFS is either enabled or disabled on both endpoints of connection;
It is not possible to upgrade all my devices at one time. SSTP Client from Small and Home Office are located throughout the world (Hong Kong, Dubai, USA, Canada, Czech Republic ..). :(
If you want take the risk of the update, must exist some benefit.
If all is working, why you want update?
Freeze forever no 6.25 is not a good idea. (reasons for update: support for new hardware, security updates, new features ....)
 
pehavel
just joined
Posts: 3
Joined: Thu Apr 23, 2015 10:50 am

Re: RouterOS v6.28 released

Thu Apr 23, 2015 10:56 am

*) lte - ZTE MF823 may loose configuration;
What does that mean exactly?
Thank you
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.28 released

Thu Apr 23, 2015 11:29 am

pehavel - It means that issue "ZTE MF823 may loose configuration" is fixed in this version
 
gabeselig
just joined
Posts: 9
Joined: Tue May 08, 2012 3:52 am

Re: RouterOS v6.28 released

Thu Apr 23, 2015 4:09 pm

I have found the following issues:

Speed/Duplex negotiation issue between Netmetal5 and RB1100 will not link at 1 Gb. If the same netmetal5 is connected to a CCR1036, it will negotiate at 1 Gb. I have found two instances already.

If the same RB1100 model (the ones listed above experiencing link speed issues) is connected to a RB922UAGS-5HPacD (instead), it will link at 1 Gb when that RB912UAG is running version 6.25 (RB version 3.17). If that RB922UAGS is upgraded to version 6.28 (RB version 3.22), the link will still negotiate at 1GB. The speed issue appears to only exist between the Netmetal5 and the RB1100

Unfortunately, I have just finished testing on a third set of netmetal5 and RB1100 and it linked up at 1 Gb and acted fine. It may be an issue with PoE and voltage supplied or something else entirely.

When doing a system export, the /system health will not export and will time out on a PowerPC (RB1100). This is also duplicated twice on two separate RB1100s. This is not an issue on a 1100AHx2 and is not an issue on a 1100AH.

When in the winbox GUI, only on the RB1100 models, the system health section will not open up properly and will only provide three buttons, OK, Cancel, Apply.

On the CRS125 model, when a mikrotik branded SFP (have not tested other brands) is inserted (even after rebooting / reseating SFP, reseating fiber), the SFP does not report any DOM measurements. This is only tested on mikrotik's Single Model 1 Gb SFP (S-31DLC20D)
Last edited by gabeselig on Thu Apr 23, 2015 6:17 pm, edited 1 time in total.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 2946
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: RouterOS v6.28 released

Thu Apr 23, 2015 4:12 pm

LCD Page List not working, can not add interfaces to the LCD Page List and the Max Speed can not be set.
On what hardware?
I have checked one CCR1036-12G-4S and one 2011UiAS, no problem on both.
I'm Italian, not English. Sorry for my imperfect grammar.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 2946
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: RouterOS v6.28 released

Thu Apr 23, 2015 4:29 pm

Mikrotik without igmp snooping and DHCP snooping is cheap toys !
We really need to switch IGMP and DHCP snooping.
Please stop to post this everywhere.

If you need DHCP snooping, use only MikroTik switch devices and simply do it with scripting.
I'm Italian, not English. Sorry for my imperfect grammar.
 
TomosRider
Member Candidate
Member Candidate
Posts: 202
Joined: Thu Nov 20, 2014 1:51 pm

Re: RouterOS v6.28 released

Thu Apr 23, 2015 4:43 pm

Testing this release on couple of 750's...so far, so good...:)
 
gerencia@e-digitales.com
Member Candidate
Member Candidate
Posts: 106
Joined: Sat Feb 25, 2006 9:01 pm
Location: Sydney Au

Re: Issue upgrading to ver 6.28

Thu Apr 23, 2015 5:07 pm

Hi all,
I'm no t really sure whether this is a version issue but i have upgraded 4 units so far to this ver. and 3 out of four never came back from the upgrade, all are remote units so now i have to go and check them up.

Has any one had this tiny problem upgrading to this new release?
thanks
Already went to the site and performed a manual reboot (Power out) and voila....up again.
 
tolkn
just joined
Posts: 3
Joined: Tue May 07, 2013 3:30 pm
Contact:

Re: RouterOS v6.28 released

Thu Apr 23, 2015 5:38 pm

Rapid reboot loop, out of memory, 6.28. Fine with 6.27.

System initially ran for about 30 minutes, but then entered reboot loop with a time constant of less than 30s. I managed to scp the 6.27 .npk package in during one brief window and then run "/system package downgrade" in the next to recover the router.

apr/22/2015 20:38:23 system,error,critical System rebooted because of kernel failure
apr/22/2015 20:38:23 system,error,critical Out of memory condition was detected
apr/22/2015 20:38:23 system,error,critical router was rebooted without proper shutdown
apr/22/2015 20:40:09 system,error,critical router was rebooted without proper shutdown by watchdog timer
apr/22/2015 20:41:19 system,error,critical System rebooted because of kernel failure
apr/22/2015 20:41:19 system,error,critical Out of memory condition was detected
apr/22/2015 20:41:19 system,error,critical router was rebooted without proper shutdown

RB2011 uAS. I don't think I'm doing anything exotic: prosumer PPPoE, IPv6, some queue prioritisation, nothing very complex.
+1 memory leak in my 2011. Downgrade to 6.27 fix cyclic reboot.
 
DjM
Member Candidate
Member Candidate
Posts: 111
Joined: Sun Dec 27, 2009 2:44 pm

Re: RouterOS v6.28 released

Thu Apr 23, 2015 5:58 pm

Hello MikroTik support team,

[Ticket#2015032266000169]

I'm still not able to add a comment for /ip dhcp-server alert via CLI, please see ticket for details.
 
leandrobianchin
just joined
Posts: 2
Joined: Thu Apr 23, 2015 11:29 pm

Re: RouterOS v6.28 released

Thu Apr 23, 2015 11:43 pm

Hello,
I have 1 ccr (1036-8G-2S+) and 4 crs (226-24G-2S+) with ring topology via fiber optic 10Gb and bridge with rstp protocol.
Everything was working fine until I upgrade to version 6.28, which occurs following the fall of sfp ether and interfaces that are part of the bridge (rstp). Other ports are still normal.
Has anyone had this problem?
Thank you.
 
sx10
newbie
Posts: 28
Joined: Fri Jan 04, 2013 5:46 am
Location: Portland, OR USA

Re: RouterOS v6.28 released

Fri Apr 24, 2015 1:20 am

Is there a problem with the release candidate changelog on the download page? I see we are up to 6.29 RC10 but the changelog hasn't been updated in weeks (still 6.28 rc20).
 
leandrobianchin
just joined
Posts: 2
Joined: Thu Apr 23, 2015 11:29 pm

Re: RouterOS v6.28 released

Fri Apr 24, 2015 3:31 am

At first I saw nothing regarding this problem.

How was working perfectly before I went back again to the 6:27 version, which solved the problem.

Grateful for the help sx10.
 
User avatar
armandfumal
Member Candidate
Member Candidate
Posts: 125
Joined: Wed Apr 25, 2012 5:50 pm
Location: Huldange,LUX
Contact:

Re: RouterOS v6.28 released

Fri Apr 24, 2015 5:26 am

Hi all,

Upgrade to 6.28, CCR1036
after 20 mins my BGP config disappear, no more instance, no more config possible.
autosuppout created.
reverse to 6.27 resolve the problem.
ticket created at support.

anybody has the case ?

regards

Armand
Armand Fumal
________________________________________________________________
MikroTik & Ubiquity
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: RouterOS v6.28 released

Fri Apr 24, 2015 8:22 am

Changelog for 6.29rc version is now uploaded to our download site. Sorry about a delay.
 
Abdock
Member Candidate
Member Candidate
Posts: 245
Joined: Sun Sep 25, 2005 10:50 pm

Re: RouterOS v6.28 released

Fri Apr 24, 2015 9:09 am

Hello Strods, Can we have the changelog for this rc release.

Thanks.

Who is online

Users browsing this forum: No registered users and 6 guests