Community discussions

MikroTik App
 
nmos
just joined
Topic Author
Posts: 1
Joined: Tue May 18, 2021 10:08 pm

Help troubleshooting IP Camera access

Fri Jun 11, 2021 1:54 am

I want to be able to access an IP camera from two different networks. The main issue is that I'm not even able to ping the camera. This is the diagram of my setup, as it is I'm able to ping the Ether3 interface (192.168.1.63) in Router C from the PC attached to Router B, however, when I try to ping the camera (192.168.1.64) it fails. The same behavior occurs when I try to ping from the PC attached to router A.
pregunta.png
I'm able to ping the camera inside the Router C terminal. What drives me crazy is the fact that I'm able to ping the interface but not the freaking camera connected to it.

Any guidance on how to troubleshoot this will be deeply appreciatted.
You do not have the required permissions to view the files attached to this post.
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 7773
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: Help troubleshooting IP Camera access

Sun Jun 13, 2021 4:00 pm

Sorry this is not a networking site this is a Mikrotik user support site..
Furthermore this particular forum is for useful articles, and so if you have questions ask them in the beginner forum and provide details of which MT devices you are using and their config
./export hide-sensitive file=anynameyouwish
I'd rather manage rats than software. Follow my advice at your own risk! (Sob & mkx forced me to write that!)
MTUNA Certified, by the Ascerbic Llama!

Who is online

Users browsing this forum: anav, borex, kiler129, Mosfet, rextended, thompsontech and 129 guests