Community discussions

 
syadnom
Member
Member
Posts: 341
Joined: Thu Jan 27, 2011 7:29 am

Re: LHG 60G

Sun May 13, 2018 10:25 pm

Ive seen reports of 2km but drops in rain..
 
pe1chl
Forum Guru
Forum Guru
Posts: 4328
Joined: Mon Jun 08, 2015 12:09 pm

Re: LHG 60G

Mon May 14, 2018 10:34 am

Any idea what could be the maximum distance for this devices? I am using Ubnt Airfiber 24 at 15.3km link, and ubnt is declaring 13+ km. This is 1.5+ km! Could it reach 2km, and how will it behave at heavy rain?
Those other devices operate at a different frequency where the atmospheric attenuation is not so big as it is on 60 GHz.
The max distance and behaviour is not determined by the manufacturer, but by physics.
 
ste
Forum Guru
Forum Guru
Posts: 1657
Joined: Sun Feb 13, 2005 11:21 pm

Re: LHG 60G

Mon May 14, 2018 12:15 pm

Any idea what could be the maximum distance for this devices? I am using Ubnt Airfiber 24 at 15.3km link, and ubnt is declaring 13+ km. This is 1.5+ km! Could it reach 2km, and how will it behave at heavy rain?
Those other devices operate at a different frequency where the atmospheric attenuation is not so big as it is on 60 GHz.
The max distance and behaviour is not determined by the manufacturer, but by physics.
Using 24 GHz at this distance gives very low reliability with rain. Guess pe1chl has a good backup connection or live in a desert.
60GHz is something to use reliable way below a mile. This 1.5km is a very long link for 60GHz.
 
User avatar
blue
Member Candidate
Member Candidate
Posts: 208
Joined: Sun Dec 12, 2004 1:48 pm
Location: Serbia

Re: LHG 60G

Mon May 14, 2018 12:32 pm

24ghz is working like a charm when there is no heavy rain. During heavy storms, Netmetal AC is taking over, but luckily it takes only couple of minutes. I can't wait to get my hands on LHG60. Now it is rainy season in Balkans so it would be the great time to test those devices...

P.S. When we can expect those devices in sales?
 
mistry7
Forum Veteran
Forum Veteran
Topic Author
Posts: 701
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: LHG 60G

Mon May 14, 2018 12:39 pm

All my Dealers say begin of June
 
ste
Forum Guru
Forum Guru
Posts: 1657
Joined: Sun Feb 13, 2005 11:21 pm

Re: LHG 60G

Mon May 14, 2018 1:16 pm

All my Dealers say begin of June
Need some to replace these Ignitenets. A replaced link again causes trouble. Very low quality of components. Hopefully LHG 60 works from the beginning.
 
pampi
newbie
Posts: 39
Joined: Mon Dec 26, 2005 7:28 pm
Location: Hungary / Pecs

Re: LHG 60G

Sun Jun 10, 2018 5:04 pm

Hi,

we deployed LHG60 on link with distance 1,05 km. RSSI is -52/-52. In last firmware there is opportunity disable beamforming - we use it for perform adjustment. The link has capacity 1 Gbit FD, meassured by traffic generator.

[admin@MikroTik] > interface w60g monitor 0
connected: yes
frequency: 58320
remote-address: 30:07:4D:43:06:E9
mcs: 8
phy-rate: 2.3Gbps
signal: 80
rssi: -53
tx-sector: 20
tx-sector-info: right 0.2 degrees, down 0.6 degrees
rx-sector: 96


Very nice product :)
could you please tell me where can you disable the beamforming, and with what ros version?
 
mistry7
Forum Veteran
Forum Veteran
Topic Author
Posts: 701
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: LHG 60G

Wed Jun 13, 2018 6:46 pm

All my Dealers say begin of June
Need some to replace these Ignitenets. A replaced link again causes trouble. Very low quality of components. Hopefully LHG 60 works from the beginning.
There is something on the way...

https://www.mikrotik-shop.de/Komplettsy ... :2256.html
 
server8
Member Candidate
Member Candidate
Posts: 199
Joined: Fri Apr 22, 2011 1:27 pm

Re: LHG 60G

Thu Jun 14, 2018 12:28 pm

LHG60 is on my desk :-)

I have a short link around 200m to make some test I'd like to know the default tx power of the LHG 60?

Thank you in advance
 
ste
Forum Guru
Forum Guru
Posts: 1657
Joined: Sun Feb 13, 2005 11:21 pm

Re: LHG 60G

Thu Jun 14, 2018 3:49 pm

LHG60 is on my desk :-)

I have a short link around 200m to make some test I'd like to know the default tx power of the LHG 60?

Thank you in advance
Got 2 links :-). Happy testing.

Who is online

Users browsing this forum: No registered users and 7 guests