Community discussions

MikroTik App
 
User avatar
indnti
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 79
Joined: Thu Nov 09, 2006 11:53 am

CRS326-24S+2Q - SNMP Temperatur Monitoring

Wed Jun 16, 2021 4:59 pm

Hi

On one of our five CRS326-24S+2Q the device temperature can be monitored via SNMP (Zabbix) since ROS 6.48.3. On the other 4 CRS it is "not supported".
They have the same newest Router OS, the same Firmware (6.48.3), the same firmware type (qca9531L) and the SNMP settings on the monitoring server are the same.
The only difference is, that the 326 where the device temperature can be retrieved is a litte bit newer, maybe a half year.
If I filter on the Mikrotik hardware site on "Temperature Sensor" the CRS326 isn't shown.
Does this make any sense?
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 4644
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: CRS326-24S+2Q - SNMP Temperatur Monitoring

Wed Jun 16, 2021 7:22 pm

[rextended@Gateway] > sys he pri oid 
         active-fan: .1.3.6.1.4.1.14988.1.1.3.9.0
            voltage: .1.3.6.1.4.1.14988.1.1.3.8.0
            current: .1.3.6.1.4.1.14988.1.1.3.13.0
        temperature: .1.3.6.1.4.1.14988.1.1.3.10.0
    cpu-temperature: .1.3.6.1.4.1.14988.1.1.3.11.0
  power-consumption: .1.3.6.1.4.1.14988.1.1.3.12.0
[rextended@Gateway] > 
yes, version revision happen...


if is present a /r2 on the end of serial, are second release, if is not present any /r are first,
/3 is the third, and so on...
 
User avatar
indnti
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 79
Joined: Thu Nov 09, 2006 11:53 am

Re: CRS326-24S+2Q - SNMP Temperatur Monitoring

Fri Jun 18, 2021 11:23 pm

All CRS326 serves out the device temperature on OID .1.3.6.1.4.1.14988.1.1.3.100.1.3.14, but only the newer supports OID .1.3.6.1.4.1.14988.1.1.3.10.0

Who is online

Users browsing this forum: andriys, Bing [Bot], nz_monkey and 21 guests