Community discussions

MikroTik App
just joined
Topic Author
Posts: 1
Joined: Thu Jun 17, 2021 3:08 pm

RB4011 10G SFP Module Question

Thu Jun 17, 2021 3:23 pm

Hello everyone.

Just got the RB4011W and am trying to use the 10G SFP for an uplink port to my 10G Trendnet TEG-7080. If I use any of the bridged 1G ethernet ports as the uplink, I can get to my network with no issues. When I plug into the SFP interface and plug into my switch, the interface is active and working but I get no ability to connect to my servers. I noticed when I connect to 1G port my switchport will get an orange light indicating STP activation but when I plug the 10G SFP in, there is only solid green light on my switch and I cannot get to my network.

Can someone help me figure out if this is configuration issue, not using the correct hardware or what my issue may be?

I am very new to networking and Mikrotik and any suggestions would be greatly appreciated.

Thank you.
Posts: 450
Joined: Mon Jul 14, 2008 11:10 am
Location: The Netherlands

Re: RB4011 10G SFP Module Question

Fri Jun 18, 2021 11:02 am

Did you bridge the SFP+ port with the other ports?
Linux/network engineer: ITIL, LPI1, CCNA R+S, CCNP R+S, JNCIA, JNCIS-SEC
Member Candidate
Member Candidate
Posts: 289
Joined: Thu Oct 27, 2011 2:19 pm

Re: RB4011 10G SFP Module Question

Sun Jun 27, 2021 4:16 pm

Post your current config.
/export hide-sensitive file=anynameyouwish
Forum Guru
Forum Guru
Posts: 2147
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: RB4011 10G SFP Module Question

Sun Jun 27, 2021 4:25 pm

As you can see does the SFP connect to the CPU and not the switch switches. As written above it has to be put in the bridge:

Loving my freedom and so, no Twitter, no Facebook/Instagram/WhatsApp, no Apple and no Google/Alphabet, no Amazon/Cloudfront/AWS.

RouterOS 6.49Beta / Winbox 3.27 64bits

Who is online

Users browsing this forum: Bing [Bot], Vattar and 28 guests