Community discussions

MUM Europe 2020
 
F.J.S.
just joined
Topic Author
Posts: 4
Joined: Thu Aug 17, 2006 9:58 am

Overclocking RB112

Fri Aug 18, 2006 11:10 am

I used command:
/system routerboard settings set cpu-frequency=180MHz
I got
input does not match any value of cpu-frequency
What's wrong?
I tested even 200MHz and 264MHz, everything same.
Only 175MHz accepted. Why?

It is RB112, RouterOS 2.9.28, firmware 1.14
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24375
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Fri Aug 18, 2006 11:14 am

what do you get at the cpu-frequency= when you type TAB twice ?
 
F.J.S.
just joined
Topic Author
Posts: 4
Joined: Thu Aug 17, 2006 9:58 am

Fri Aug 18, 2006 11:15 am

what do you get at the cpu-frequency= when you type TAB twice ?
175MHz
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24375
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Fri Aug 18, 2006 11:19 am

sorry, setting of this value only works on RB500 series
 
stealth
just joined
Posts: 21
Joined: Fri May 26, 2006 4:55 pm

Mon Aug 28, 2006 8:14 pm

I setted RB112 to 200Mhz by adding 1khz resistor to R7 position and jumper on JP7. Works fine
 
F.J.S.
just joined
Topic Author
Posts: 4
Joined: Thu Aug 17, 2006 9:58 am

Mon Aug 28, 2006 8:19 pm

I setted RB112 to 200Mhz by adding 1khz resistor to R7 position and jumper on JP7. Works fine
Which transfer did you reach?
 
stealth
just joined
Posts: 21
Joined: Fri May 26, 2006 4:55 pm

Mon Aug 28, 2006 10:48 pm

I setted RB112 to 200Mhz by adding 1khz resistor to R7 position and jumper on JP7. Works fine
Which transfer did you reach?
Cant remember exactly, but it was about 14% increase.
Same graduality as on RB532.
 
jarosoup
Long time Member
Long time Member
Posts: 600
Joined: Sun Aug 22, 2004 9:02 am

Tue Aug 29, 2006 1:32 am

I setted RB112 to 200Mhz by adding 1khz resistor to R7 position and jumper on JP7. Works fine
Nice, thanks for sharing 8)

Who is online

Users browsing this forum: No registered users and 20 guests