Page 1 of 1

RB750P-PBr2 mAP_lite

Posted: Tue Feb 02, 2016 11:03 pm
by ivaaan
Hello everyone!
At last I got mAP lite. And it is really the smallest AP a ever see! But I was surprised when found that power consumption is up to 3,5W. And original power supplier is 2000mA.
Initially I wanted to use 4 mAP lite with Mikrotik PowerBOX RB750P, but the PowerBOX is support no more then 1A per port and 2A in total. And it looks like powerbox becomes useless

Anybody have good experience with PoE and what cheap PoE supplier (multiport injector or switch) you can suggest?

Re: RB750P-PBr2 mAP_lite

Posted: Wed Feb 03, 2016 11:25 am
by PaulsMT
PowerBox comes with 24v 2,5Amp power supply, which is completely fine to power four mAPL. While PowerBox output voltage is the same as input voltage (24V), one mAPL at max power consumption will require 0.145A

Re: RB750P-PBr2 mAP_lite

Posted: Fri Feb 05, 2016 7:18 am
by ivaaan
Thank you so much!

Re: RB750P-PBr2 mAP_lite

Posted: Wed Feb 24, 2016 6:58 am
by gammy69er
Watts roughly *EDIT* Exactly *EDIT* equates to Amps x Volts

24v x 2a = 48w

3.5w / 24v = 0.146a - well below the 1 amp limit per port.

*EDIT* See what i did there :P Cheers Jarda - good info as usual

Posted: Wed Feb 24, 2016 7:10 am
by jarda
Ohm law on dc is not rough but exact.