Page 1 of 1

Metal 52 ac - cannot use 10MHz channel on 2.4 GHz

Posted: Thu Nov 17, 2016 12:50 am
by AiroSam
I have just deployed a Metal 52 ac and am using it on the 2.4GHz spectrum. Setting it to 10MHz Channel Width causes errors:

I am aware that Mikrotik ac does not work on 10Mhz. But I'm not even using AC Band or 5GHz. Is it possible to fix this or will I have to use Metal 2SHPn's?

Thank you in advance.

-Sam

Re: RE: Metal 52 ac - cannot use 10MHz channel on 2.4 GHz

Posted: Thu Nov 17, 2016 7:06 am
by MrcS
I have just deployed a Metal 52 ac and am using it on the 2.4GHz spectrum. Setting it to 10MHz Channel Width causes errors:

I am aware that Mikrotik ac does not work on 10Mhz. But I'm not even using AC Band or 5GHz. Is it possible to fix this or will I have to use Metal 2SHPn's?

Thank you in advance.

-Sam
The hardware does not support.

Channel Utilization
20/40 MHz
20/40/80 MHz

https://www.qualcomm.com/products/qca9889

Sent from my SM-N910C using Tapatalk