Community discussions

 
bon2
just joined
Posts: 2
Joined: Fri Jun 21, 2019 4:51 pm

Re: RB3011 port flopping - bad design

Sat Jun 22, 2019 5:33 am

I have the same or similar problem,
I open a case with MT but they are useless as ashtray on a motorbike,
I have a ROS v 6.44.3 with Intel PRO Ethernet interfaces
The problem appear in few hours and only on LAN interface. (the MT have only two interfaces LAN and WAN)
The traffic is no more of 150Mb/s
If I switch the LAN interface to 100Mb/s the problem didn't appear

The same config on CHR (Cloud Hosted Router) on ESXi host, work well with no problems, with the same cables and same Ethernet cards

Please MT fix this problem,

I am planing to migrate to a different platform if no "FIX" of this port flapping problem
 
Guntis
MikroTik Support
MikroTik Support
Posts: 31
Joined: Fri Jul 20, 2018 1:40 pm

Re: RB3011 port flopping - bad design

Tue Jun 25, 2019 12:17 pm

Could you please give us your ticket number?
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2278
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: RB3011 port flopping - bad design

Tue Jul 02, 2019 6:43 pm

Still not fixed in 6.45.1 with cpu-flow-control=no :( :(
[Ticket#2019062722005304]
LAN, FTTx, Wireless. ISP operator
 
frogale
just joined
Posts: 20
Joined: Thu Jun 22, 2006 11:57 pm

Re: RB3011 port flopping - bad design

Sun Jul 21, 2019 8:39 pm

Same problem here.. RB3011 port 5-10 flaping randomly many times per day.. No 100M and gigabit mix.. Any progress on this?
 
angriukas
just joined
Posts: 10
Joined: Fri Nov 22, 2013 9:20 am
Location: Lithuania
Contact:

Re: RB3011 port flopping - bad design

Fri Jul 26, 2019 1:49 pm

Have same problem on CRS326-24G-2S+ and CRS125-24G-1S
 
User avatar
Steveocee
Forum Guru
Forum Guru
Posts: 1050
Joined: Tue Jul 21, 2015 10:09 pm
Location: UK
Contact:

Re: RB3011 port flopping - bad design

Fri Aug 02, 2019 3:56 pm

Have same problem on CRS326-24G-2S+ and CRS125-24G-1S
You have a different problem.
Steve "Steveocee" Carter
PC Gamer, Airsofter, MikroTik Nerd
My Website - My MikroTik Tutorials

Who is online

Users browsing this forum: No registered users and 16 guests