Page 1 of 1

HAP AC2 PERFORMANCE NUMBERS

Posted: Fri Feb 09, 2018 6:21 pm
by chechito
Somebody from mikrotik can confirm published performance numbers from hAP ac2 ??

https://mikrotik.com/product/hap_ac2

are really impressive!!!
27857943_10155027971640740_5729600276546474243_n.jpg

practically wipes the rb3011 !!! (except fast-path and big packet tests)

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Fri Feb 09, 2018 6:25 pm
by mrz
Yes, these are official test results.

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Fri Feb 09, 2018 8:44 pm
by pcunite
Yep, looks good. Hoping we can see an 8 port+ router/switch all-in-one based on this.

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Sat Feb 10, 2018 6:44 am
by chechito
Yes, these are official test results.
thank you for your response

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Sat Feb 10, 2018 6:45 am
by chechito
i dream an rb750GR4 on this chipset

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Sat Feb 10, 2018 9:31 am
by JohnTRIVOLTA
i dream an rb750GR4 on this chipset
Why, the router has five ports ... rather we are waiting for a flagship with 8+ Geternet ports , SFP+, hdd bay sata3, HighPower radios 802.11ac/ax 8/4-stream Dual-band with combo /5GHz and 2.GHz /
external antennas ... maybe based on Qualcomm IPQ8074 !

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Sat Feb 10, 2018 9:49 pm
by aidan
i dream an rb750GR4 on this chipset
The IPQ-4018 is built as a Wi-Fi chip by Qualcomm, and I think is unlikely to be used in a hEX.

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Sun Feb 11, 2018 12:03 am
by chechito
i dream an rb750GR4 on this chipset
Why, the router has five ports ... rather we are waiting for a flagship with 8+ Geternet ports , SFP+, hdd bay sata3, HighPower radios 802.11ac/ax 8/4-stream Dual-band with combo /5GHz and 2.GHz /
external antennas ... maybe based on Qualcomm IPQ8074 !
go for rb1100ahx4 then


i speak about rb750g concept: a 60us router with this chipset but 256mb of ram

if you need an sfp transceiver go for Hex POE and attach it to your existing equipment

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Thu Feb 15, 2018 1:50 pm
by anuser
go for rb1100ahx4 then
RB1100ahx32. The cores on that integrated ASIC seem to have better performance the the ones of TILEGX

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Mon Feb 26, 2018 7:02 am
by biatche
can anybody share wireless performance of hap ac2 vs hap ac?
the comments on cap ac is quite scary and these two products were released (around?) the same time.
looking to purchase a dozen of these but i must be assured they work well.

lso, does hap ac2 support switch vlan / hw offload? this should be updated to contain newest hardware..... https://wiki.mikrotik.com/wiki/Manual:S ... Offloading

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Mon Feb 26, 2018 10:22 am
by sebastia
It's currently only supported through the switch configuration (switch chip = AR8327), see https://wiki.mikrotik.com/wiki/Manual:S ... s_Ports.29

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Mon Feb 26, 2018 6:05 pm
by biatche
i questioned support about the worrying performance on this thread. they suggest to try the latest rc. will you guys give it a go?

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Mon Feb 26, 2018 7:01 pm
by chechito
go for rb1100ahx4 then
RB1100ahx32. The cores on that integrated ASIC seem to have better performance the the ones of TILEGX
yes arm cortex a15 core has better performance than a tile core

but is not that simple to escalate something from 4 cores to 32 or 36 cores SoC in terms of yield, power and costs

for example rb1100ahx4 quad core cortex a15 power consumption is around 20 watt, escalate that to 32 cores and you get easily around 120watt of SOC power consumption, similar to tilera 72 core SoC

WIll be a good idea replace for example:

tilera 9 core by 4 core arm a15 (allready done)

tilera 16 core by 8 core arm a15 at 1.4ghz

tilera 36 core by 16 core arm a15 at 1.4ghz

tilera 72 core by 32 core arm a15 at 1.4ghz


possible same multi-core performance, but 2x single core performance

but that not imply lower costs

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Tue Apr 17, 2018 8:55 pm
by phin
practically wipes the rb3011 !!! (except fast-path and big packet tests)

I am really starting to regret this purchase.

gigE performance has been, meh.. dismal at best.

No HW supported openvpn yet.

:(

Re: HAP AC2 PERFORMANCE NUMBERS

Posted: Tue Apr 17, 2018 10:14 pm
by vadimbn
No HW supported openvpn yet.

:(
When it was promised? And who it promised? Or you mean hardware support for IPsec?