Community discussions

MikroTik App
  4. Other topics
  5. RouterBOARD hardware

RB953GS-5HnT and two R11e-LTE

Post Reply
 
artkus
just joined
Topic Author
Posts: 2
Joined: Wed Apr 11, 2018 2:57 pm

RB953GS-5HnT and two R11e-LTE

Wed Apr 11, 2018 3:21 pm

Hello everyone. I try to connect two LTE-modules (R11e-LTE) to Router Board (RB953GS-5HnT). When I do
Code: Select all
/interface lte print
I view:
Code: Select all
[admin@MikroTik] > /interface lte print
Flags: X - disabled, R - running 
 0  R name="lte1" mtu=1480 mac-address=AC:FF:FF:00:00:00 apn=internet network-mode=gsm,3g,lte ipv6-interface=none ip-type=ipv4
There are no second LTE-module in list.

Does RB953GS-5HnT support two simultaneously plugged R11e-LTE?
Should I do somesing special to activate second R11e-LTE?
Top
 
User avatar
CyB3RMX
Member Candidate
Member Candidate
Posts: 148
Joined: Thu May 26, 2011 7:08 am

Re: RB953GS-5HnT and two R11e-LTE

Sat Aug 18, 2018 7:50 pm

Maybe is a power issue, i had an issue similar problem when i plugged in a Huawei MiniPCI LTE card and enabled onboard wifi on a RB912, this command helped.
Code: Select all
/system routerboard usb set type=mini-PCIe
regards.
JB.
Top
 
User avatar
barts
just joined
Posts: 8
Joined: Fri May 24, 2019 6:57 am

Re: RB953GS-5HnT and two R11e-LTE

Fri Sep 06, 2019 8:26 am

I'm having the same problem with the exactly same equipment and modules.

I'm using 24HPOW power adapter:
Code: Select all
[user@MikroTik] > system health print 
      voltage: 24.3V
  temperature: 33C
[user@MikroTik] >

Already made the following command and upgraded both modules:
Code: Select all
/system routerboard usb set type=mini-PCIe

[user@MikroTik] > interface lte firmware-upgrade lte1
  installed: MikroTik_CP_2.160.000_v012
     latest: MikroTik_CP_2.160.000_v012
[user@MikroTik] 

[user@MikroTik] > interface lte firmware-upgrade lte2
  installed: MikroTik_CP_2.160.000_v012
     latest: MikroTik_CP_2.160.000_v012
[user@MikroTik] >

Did you find some way to fix, @artkus?
Top
 
User avatar
Amm0
Forum Guru
Forum Guru
Posts: 3441
Joined: Sun May 01, 2016 7:12 pm
Location: California

Re: RB953GS-5HnT and two R11e-LTE

Sun Sep 08, 2019 4:09 am

You might want to try to increase the boot delay in System > Routerboard and make sure your running the latest OS, include matching firmware.

That being said...we use the RB953 a lot with 2 modems, but with only one R11e-LTE-US (with the other modem being a Sierra MC LTE modem). I haven't tested in a while but pretty sure we never got 2 R11e-LTE-US one to work on the RB953, but we really only wanted one anyway so I can't say for sure. I think this worked because the Sierra modem is a PPP interface modem, so there is only one LTE interface needed in our case (the Sierra modem comes up under PPP).
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 38 guests
  4. Other topics
  5. RouterBOARD hardware