Community discussions

 
andrewant
just joined
Topic Author
Posts: 3
Joined: Tue Jul 24, 2018 9:16 am

CRS328-24P-4S+RM SFP+ ports problem

Tue Jul 24, 2018 10:00 am

I faced with problem - CRS328's SFP ports can't link with CRS125's SFP port in AutoNegotiation mode. When I set 1Gb link speed - it works. It is feature or bug ?
 
mx510
just joined
Posts: 6
Joined: Sat Apr 16, 2011 8:51 pm

Re: CRS328-24P-4S+RM SFP+ ports problem

Wed Sep 05, 2018 6:26 pm

I got the same problems

Set auto 10gb sfp will be working okay if set manually 10gb it works at 1gb and cannot do any routing
 
andrewant
just joined
Topic Author
Posts: 3
Joined: Tue Jul 24, 2018 9:16 am

Re: CRS328-24P-4S+RM SFP+ ports problem

Thu Dec 06, 2018 8:05 pm

From " What's new in 6.43.7 (2018-Nov-30 09:01):"
*) crs328 - fixed SFP ports not reporting auto-negotiation status;
*) crs328 - improved link status update on disabled SFP and SFP+ interfaces;


But it do not work.
 
netbis
just joined
Posts: 2
Joined: Fri Feb 08, 2019 4:17 pm

Re: CRS328-24P-4S+RM SFP+ ports problem

Fri Feb 08, 2019 4:26 pm

I agree. It not working! After settings 10 GB manualy in status shows 1 GB and not working.
 
netbis
just joined
Posts: 2
Joined: Fri Feb 08, 2019 4:17 pm

Re: CRS328-24P-4S+RM SFP+ ports problem

Fri Feb 08, 2019 5:05 pm

I have the same problem. Using cooper 10 GB cable is ok, but on using SFP Fiber 10 Gb not working. I try many settings.
 
maxsaf
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Mar 06, 2018 8:47 pm

Re: CRS328-24P-4S+RM SFP+ ports problem

Wed May 22, 2019 10:10 pm

I have same issue with SFP ports. Tested on 6.43.7 and 6.45.beta50.
If auto negotiation is enabled - no link
If auto negotiation is disabled - port is running but no incoming traffic
SWITCH.PNG
You do not have the required permissions to view the files attached to this post.
 
paulct
Member Candidate
Member Candidate
Posts: 295
Joined: Fri Jul 12, 2013 5:38 pm

Re: CRS328-24P-4S+RM SFP+ ports problem

Thu May 23, 2019 1:22 pm

There is an issue I have picked up which I have sent through to support.
However on a CRS317, using bidi Mikrotik models. They only work on ROS 6.41 and lower, any higher version and no SFP model information is displayed and there is no link with either auto or no negotiation.
 
maxsaf
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Mar 06, 2018 8:47 pm

Re: CRS328-24P-4S+RM SFP+ ports problem

Thu May 23, 2019 5:40 pm

I've tried to downgrade to 6.41.3 - no changes. Still doesn't work.
 
maxsaf
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Mar 06, 2018 8:47 pm

Re: CRS328-24P-4S+RM SFP+ ports problem

Thu May 30, 2019 9:14 pm

Powercycle did help for two days, then ports went down again. Sorry to say that device is trash.

Who is online

Users browsing this forum: No registered users and 12 guests