Community discussions

MUM Europe 2020
 
llag
newbie
Topic Author
Posts: 39
Joined: Sat Aug 04, 2018 12:12 am

CRS328 POE and Ubiquiti unify AP

Wed Sep 05, 2018 11:34 pm

I am considering buying a CRS328-24P switch as I would like to have POE available. I am however thoroughly confused about the MODEA/B support. I have a Ubiquiti AP-AC-lite that I would like to power. It is specified for 802.3AF/A, so mode A. Will the CRS328 power that device or does it do only mode B POE?
Thanks in advance for any hints you can give
 
llag
newbie
Topic Author
Posts: 39
Joined: Sat Aug 04, 2018 12:12 am

Re: CRS328 POE and Ubiquiti unify AP

Sat Sep 08, 2018 6:35 pm

Ok, I think I found the answer: the CRS328 uses mode B pins for POE, the Ubiquiti AP (AC-Lite and AC-LR) use for 802.3AF use mode A pins (only) but can be powered with passive POE 24V on mode B-pins. The CRS328 can power an AP using passive POE on mode B pins. Now I just need to find out how to configure the switch: I guess that I need to set low voltage and that probably will be sufficient....
 
hengst
Frequent Visitor
Frequent Visitor
Posts: 86
Joined: Sun Jan 03, 2010 3:04 pm

Re: CRS328 POE and Ubiquiti unify AP

Sat Sep 08, 2018 6:39 pm

i can confirm it just works out of the box with Ubnt AC lite products
 
User avatar
Ocean
just joined
Posts: 8
Joined: Mon Sep 03, 2012 11:10 am
Contact:

Re: CRS328 POE and Ubiquiti unify AP

Sat Nov 30, 2019 9:43 pm

Ok, I think I found the answer: the CRS328 uses mode B pins for POE, the Ubiquiti AP (AC-Lite and AC-LR) use for 802.3AF use mode A pins (only) but can be powered with passive POE 24V on mode B-pins. The CRS328 can power an AP using passive POE on mode B pins. Now I just need to find out how to configure the switch: I guess that I need to set low voltage and that probably will be sufficient....
Hello!

As a result, you run the Unifi AP AC Lite with 802.3af (48V) or Passive PoE (24V) with CRS328?
Andrey
 
Zacharias
Forum Guru
Forum Guru
Posts: 1075
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: CRS328 POE and Ubiquiti unify AP

Sat Nov 30, 2019 10:46 pm

Mode B is used....
All MikroTik PSE uses the same PoE-Out pin polarity Mode B 4,5 (+) and 7,8 (-)
https://wiki.mikrotik.com/wiki/Manual:PoE-Out
 
User avatar
Ocean
just joined
Posts: 8
Joined: Mon Sep 03, 2012 11:10 am
Contact:

Re: CRS328 POE and Ubiquiti unify AP

Sun Dec 01, 2019 11:23 am

Mode B is used....
All MikroTik PSE uses the same PoE-Out pin polarity Mode B 4,5 (+) and 7,8 (-)
https://wiki.mikrotik.com/wiki/Manual:PoE-Out
Unifi AP AC Lite receives PoE power from CRS328? No problem?
Andrey
 
Zacharias
Forum Guru
Forum Guru
Posts: 1075
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: CRS328 POE and Ubiquiti unify AP

Sun Dec 01, 2019 11:38 am

Mode B is used....
All MikroTik PSE uses the same PoE-Out pin polarity Mode B 4,5 (+) and 7,8 (-)
https://wiki.mikrotik.com/wiki/Manual:PoE-Out
Unifi AP AC Lite receives PoE power from CRS328? No problem?
Why dont you have a look at the specs ?
So, according its specs, Unifi ap ac lite uses as well Passive PoE (Pairs 4, 5+; 7, 8 Return)...
So i guess it will work...
 
User avatar
Ocean
just joined
Posts: 8
Joined: Mon Sep 03, 2012 11:10 am
Contact:

Re: CRS328 POE and Ubiquiti unify AP

Mon Dec 02, 2019 8:27 pm

Why dont you have a look at the specs ?
So, according its specs, Unifi ap ac lite uses as well Passive PoE (Pairs 4, 5+; 7, 8 Return)...
So i guess it will work...
I read the specs, but I am interested in real experience of operating Unifi ap ac lite with CRS328.
Andrey
 
Zacharias
Forum Guru
Forum Guru
Posts: 1075
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: CRS328 POE and Ubiquiti unify AP

Mon Dec 02, 2019 9:15 pm

You can trust the specs as well...
 
llag
newbie
Topic Author
Posts: 39
Joined: Sat Aug 04, 2018 12:12 am

Re: CRS328 POE and Ubiquiti unify AP

Tue Dec 03, 2019 12:11 am

Mode B is used....
All MikroTik PSE uses the same PoE-Out pin polarity Mode B 4,5 (+) and 7,8 (-)
https://wiki.mikrotik.com/wiki/Manual:PoE-Out
Unifi AP AC Lite receives PoE power from CRS328? No problem?
Right, set the switch to low voltage POE and the AP-lIte will be happy. I have 2 lites running that way. I have not dared to test high voltage, although I believe that it could work. But as the CRS328 allows setting non-AF 24V why take the risk?
 
User avatar
Ocean
just joined
Posts: 8
Joined: Mon Sep 03, 2012 11:10 am
Contact:

Re: CRS328 POE and Ubiquiti unify AP

Wed Dec 04, 2019 8:32 am

llag, thanks for the info!

Soon I will test 802.3AF with AC lite and report the results.
Andrey

Who is online

Users browsing this forum: No registered users and 13 guests