How do I set (can I set) an RB750Gr3 DHCP to not push the Gateway or DNS? I only want DHCP addresses.
I need DHCP addresses in a network of devices that operate using UDP. I know it sounds odd...
The computers in this setup have 3 NIC's.
Eth0, fully operational DHCP for NAS and local file sharing LAN and corp. WAN access.
Eth1, static IP (completely unique addresses) for AoIP, synchronizing DAW's, etc. The software has settings to choose specific networks to communicate on.
These 2 networks are always present and configured as described.
Eth2 (a USB GigE adapter) is for ethernet attached control surfaces for sound mixing. These applications also have settings to choose which NIC to use.
These ethernet control surfaces on Eth2 say they are UDP and not TCP, but are always easier to connect, manage and operate if there is a DHCP server on the segment (the controllers may cause problems and are inconsistant without a DHCP server). However, having a DHCP server (that also provides a Gateway address and the address for DNS) on this network sometimes confuses the host, which must operate from the DHCP on Eth0.
This setup is variable, sometimes these devices are connected sometimes they are not. It depends upon the clients using our space.
I'm hoping we can configure the RB750Gr3 to provide DHCP and not push a Gateway or DNS.
Thanks for listening.