Page 1 of 1

CRS326 6.43.2 Reset Mac-adress results in kernel failure

Posted: Thu Sep 27, 2018 2:18 pm
by blackbox100
Hi all

on 6.43.2 and the previous 6.43.1 and 6.44beta9 if you try to reset the Mac-adress on a interface, the switch hangs and becomes unresponsive, after a reboot, the log shows kernel failure in previous boot

It works perfectly in 6.43.rc.12

Can anyone verify this fault?

Sincerely
Carsten Larsen

Re: CRS326 6.43.2 Reset Mac-adress results in kernel failure

Posted: Thu Sep 27, 2018 3:03 pm
by nescafe2002
I encountered the same on a rb3011 in 6.43rc66 and reported to support:

You might be able to avoid this bug by setting hw=no to all ports or by enabling IGMP Snooping, though that might not help entirely, it vastly depends on the traffic type and amount of it.

and one week later:

We reproduced this issue in our labs and fixed it, you should wait for the next 6.44beta version, most probably a fix will be included in 6.44beta11 or newer.

Re: CRS326 6.43.2 Reset Mac-adress results in kernel failure

Posted: Thu Sep 27, 2018 3:33 pm
by blackbox100
Ok thanks

Will wait for next beta