Community discussions

 
gotsprings
Forum Veteran
Forum Veteran
Topic Author
Posts: 774
Joined: Mon May 14, 2012 9:30 pm

CRS328-24P-4S+RM POE Problems

Fri Dec 28, 2018 7:41 pm

Trying out my first 328.

The POE seems kind of odd.
I had a Wireless Wire Not Power Up on one port but it did on another.

Then a UBNT CloudKey... plug it in and I get a "poe-out status: current_too_low" complaint. The unit won't power up until I set the port to POE Forced On and Voltage High. The error still shows but it is powering up the CloudKey.

Anyone else seeing similar issues?
"It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so."
Mark Twain
 
elbob2002
newbie
Posts: 48
Joined: Tue May 15, 2018 8:15 pm
Location: Ireland

Re: CRS328-24P-4S+RM POE Problems

Fri Dec 28, 2018 9:13 pm

are you using SwOS or RouterOS? Which verison?

I did have an issue with one port not powering a device and just plugged it into another port and it worked. I thought maybe I hadn't pushed in the connector properly.

I'm running RouterOS 6.43.7 on mine.

Routerboard firmware is 6.43.4 because I can't reboot the switch.
 
gotsprings
Forum Veteran
Forum Veteran
Topic Author
Posts: 774
Joined: Mon May 14, 2012 9:30 pm

Re: CRS328-24P-4S+RM POE Problems

Sat Dec 29, 2018 4:20 pm

Router OS 6.43.8. Matching firmware.
"It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so."
Mark Twain
 
User avatar
eworm
Member
Member
Posts: 393
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: CRS328-24P-4S+RM POE Problems

Thu Jan 03, 2019 1:03 am

Try a power cycle on the port:
/ interface ethernet poe etherX power-cycle
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
gotsprings
Forum Veteran
Forum Veteran
Topic Author
Posts: 774
Joined: Mon May 14, 2012 9:30 pm

Re: CRS328-24P-4S+RM POE Problems

Thu Jan 03, 2019 5:56 pm

Try a power cycle on the port:
/ interface ethernet poe etherX power-cycle
Unit still won't power up until I force POE to on. But the complaint in red is gone.
"It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so."
Mark Twain
 
hturkan
just joined
Posts: 7
Joined: Mon Dec 19, 2016 9:38 am

Re: CRS328-24P-4S+RM POE Problems

Tue Jan 22, 2019 8:20 pm

Hello I had the same problem. I've tried a lot of changes about POE and I haven't succeeded.
What are the predictable reasons for this problem?
Please contact us with our experienced MikroTik team.

Who is online

Users browsing this forum: No registered users and 20 guests