Sat Feb 09, 2019 7:37 pm
I tried two different cabling seq.
1st: straight-through cable
Note, The left number 1-8 is standard POE switch.
1st
1 <-> 1
2 <-> 2
3 <-> 3
4 <-> 4
5 <-> 5
6 <-> 6
7 <-> 7
8 <-> 8
HomeSW#
Feb 10 01:29:48.636: %ILPOWER-7-DETECT: Interface Gi1/0/11: Power Device detected: IEEE PD
HomeSW#
Feb 10 01:29:49.377: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/11: Power granted
HomeSW#show power inline gigabitEthernet 1/0/11
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/11 auto on 15.4 Ieee PD 4 30.0
Interface AdminPowerMax AdminConsumption
(Watts) (Watts)
---------- --------------- --------------------
Gi1/0/11 30.0 15.4
HomeSW#
HomeSW#
HomeSW#show power inline gigabitEthernet 1/0/11
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/11 auto on 15.4 Ieee PD 4 30.0
Interface AdminPowerMax AdminConsumption
(Watts) (Watts)
---------- --------------- --------------------
Gi1/0/11 30.0 15.4
HomeSW#
HomeSW#
Feb 10 01:30:46.988: %ILPOWER-5-IEEE_DISCONNECT: Interface Gi1/0/11: PD removed
HomeSW#
==================================
2nd, cross over cable
1 <-> 3
2 <-> 6
3 <-> 1
4 <-> 7
5 <-> 8
6 <-> 2
7 <-> 4
8 <-> 5
Feb 10 01:30:54.168: %ILPOWER-7-DETECT: Interface Gi1/0/11: Power Device detected: IEEE PD
HomeSW#
Feb 10 01:30:54.888: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/11: Power granted
HomeSW#
HomeSW#show power inline gigabitEthernet 1/0/11
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/11 auto on 15.4 Ieee PD 4 30.0
Interface AdminPowerMax AdminConsumption
(Watts) (Watts)
---------- --------------- --------------------
Gi1/0/11 30.0 15.4
HomeSW#
HomeSW#
====================================
Both two kinds of cable can't be powered up CRS305, all the LED is COMPLETELY OFF!
Any idea?