after replacing Zyxel GS1900-24HP with CRS328 (nothing changed except poe switch, same cabling etc) I experienced these problems with poe:
- maximum current delivered to powerbox pro (any device) is approx 350mA ~ 19W. If more that 2 poe device connected to PBoxPro (RB960PGS-PB), CRS port is overloaded ("poe-status: overload" in CRS log) and port/device is restared, If I switch back to zyxel everything went ok.
- ether2 port on cAP ac is unusable for PoE, is showed like "powered" but no poe device attached to this port is powered (not even poe splitter), port on CRS is not overloaded. Docs stated that ether2 port is passive PoE only, but with zyxel fwds PoE to splitter or 802.3af device w/o problems.
It seems like CRS328 is operating only as 802.3af. Is there any way to force port to 802.3at/PoE+?
edit: checked specs for RB960PGS-PB, on webpage is Poe in: passive PoE only, but description in newsletter is: "It also supports passive or standard 802.3at/af PoE input/output". Little bit confusing.