I've got several RB962, and each time I need to netinstall one there was some kind of problem - it won't netinstall like other MT devices.
If I remember correctly, the last time problem was solved with failsafe format (supply power while keeping reset pressed, hold reset for 300+ seconds), then it netinstalled correctly.
Today I've ran into RB962UiGS-5HacT2HnT that won't netinstall.
Resetting its config caused the router to bootloop. (I'm not sure if protected routerboot was enabled, but most probably no.)
I've kept the reset for 300s (PWR, SFP, and Eth1 LEDs on) as I've done before, and power cycled the router.
It still fails to netinstall (and I've got a shorter bootloop if power is supplied without keeping reset pressed)
I've repeated holding reset for 300s (PWR and Eth1 LEDs on, SFP flashing), and power cycled the router.
Now when I supply power (with or without reset pressed, PoE or adapter) the only LED that comes up is PWR. No link on any Ethernet port.
Looks like I've finally bricked it
Is there any way to recover the device?