Community discussions

 
flyingpiglet
just joined
Topic Author
Posts: 3
Joined: Wed Dec 19, 2018 7:14 pm

hAP AC PoE out on port 5 to power on ip camera

Mon Jun 03, 2019 12:52 pm

Dear friends
can you please advice whether it's possible to power on 802.3af ip camera from hAP AC port 5 if i use 48POW power supply for the router box?
The native power supply (24pow) seems not enough for the camera to switch on from PoE.
Thank you
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24186
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: hAP AC PoE out on port 5 to power on ip camera

Mon Jun 03, 2019 2:05 pm

no, that port only supports passive PoE output, at the same voltage as you input with the DC jack, so most likely camera will not work.
No answer to your question? How to write posts
 
flyingpiglet
just joined
Topic Author
Posts: 3
Joined: Wed Dec 19, 2018 7:14 pm

Re: hAP AC PoE out on port 5 to power on ip camera

Mon Jun 03, 2019 2:56 pm

Sorry, normis
you mean PoE port outputs the same voltage which is on DC input? So if i use 48POW i should have 48v on PoE port. Is that right?
Now i'm using 18pow and the voltage on PoE port seems not enough.
 
flyingpiglet
just joined
Topic Author
Posts: 3
Joined: Wed Dec 19, 2018 7:14 pm

Re: hAP AC PoE out on port 5 to power on ip camera

Thu Jun 06, 2019 1:23 pm

For those who might be interested - i replaced the 18POW with 48POW for my hAP AC box.
The ip camera (Dahua DH IPC-HDW4631C-A 6MP HD POE) PoE'd from ethernet port 5 works fine now.
 
User avatar
krafg
Member
Member
Posts: 308
Joined: Sun Jun 28, 2015 7:36 pm

Re: hAP AC PoE out on port 5 to power on ip camera

Sun Jun 09, 2019 6:58 pm

Very interesting, I work with Dahua cameras.

Regards.
Image

Who is online

Users browsing this forum: No registered users and 15 guests