Community discussions

 
siemar
just joined
Topic Author
Posts: 4
Joined: Sun Jul 14, 2019 12:22 am

R11e-LTE-US help

Sun Jul 14, 2019 2:43 am

Can anyone help with what band information needs to be inserted between the " " for the command /interface lte set lte1 band="" ? i have tried all the obvious as well as what is used for Sierra Wireless products.

Has anyone successfully updated the firmware on this modem either? I updated to the latest beta, 6.46beta9, which allowed for the /interface lte firmware-upgrade lte1 and interface lte firmware-upgrade lte1 upgrade=yes commands to work, but the latter would eventually respond failure after downloading for a few minutes. These commands did not work on the stable / long term builds, so they might not actually be functioning fully yet.


Cheers
 
User avatar
krafg
Member Candidate
Member Candidate
Posts: 254
Joined: Sun Jun 28, 2015 7:36 pm

Re: R11e-LTE-US help

Wed Jul 17, 2019 7:16 am

These commands are only available for R11e-LTE and R11e-LTE-4G, not for R11e-LTE-US.

I have LTE and LTE-US and only I can update LTE (International, not US).

To set the band with command you must do the following:

interface lte set 0 band=7

But if I see the export, setting the band only it sets on LTE international, not in US version card.

In my case LTE international is the "0" card and LTE-US is the "1". If I put "interface lte set 1 band=7", the export keeps without changes.

Regards.
Image
 
siemar
just joined
Topic Author
Posts: 4
Joined: Sun Jul 14, 2019 12:22 am

Re: R11e-LTE-US help

Thu Jul 18, 2019 3:32 am

Thank you for the information. Much appreciated.
 
siemar
just joined
Topic Author
Posts: 4
Joined: Sun Jul 14, 2019 12:22 am

Re: R11e-LTE-US help

Mon Jul 22, 2019 7:38 pm

Is there another way to update the modem firmware besides those commands?
 
User avatar
krafg
Member Candidate
Member Candidate
Posts: 254
Joined: Sun Jun 28, 2015 7:36 pm

Re: R11e-LTE-US help

Wed Jul 24, 2019 9:03 am

While MikroTik not release a new version of the firmware, it's not possible.

Regards.
Image

Who is online

Users browsing this forum: llag and 10 guests