Community discussions

 
mailalert
just joined
Topic Author
Posts: 12
Joined: Thu Aug 08, 2019 5:33 pm

Cant connect to RB951G-2HnD

Thu Aug 08, 2019 5:45 pm

Hello guys,
I've been doing some experiments, but after that I cannot connect to my router in any way again. I've tried winbox, but I cannot see router at all. I've tried to default reset it, but without any luck as well. It looks router doesnt do default reset at all (I've used this method: https://www.youtube.com/watch?v=pE8zaZpZR-4), because I dont obtain any IP address.

So how could I connect?! Because I am lost now ..
 
User avatar
karlisi
Member Candidate
Member Candidate
Posts: 249
Joined: Mon May 31, 2004 8:09 am
Location: Latvia

Re: Cant connect to RB951G-2HnD  [SOLVED]

Fri Aug 09, 2019 1:25 pm

Hold the reset button about 5 sec, until ACT LED starts flashing. If holded for 10 sec or more and LED stays lit or turns off, it's too long.
https://wiki.mikrotik.com/wiki/Manual:Reset
---
Karlis
 
mailalert
just joined
Topic Author
Posts: 12
Joined: Thu Aug 08, 2019 5:33 pm

Re: Cant connect to RB951G-2HnD

Mon Aug 12, 2019 7:55 pm

Hold the reset button about 5 sec, until ACT LED starts flashing. If holded for 10 sec or more and LED stays lit or turns off, it's too long.
https://wiki.mikrotik.com/wiki/Manual:Reset
yes, I HAVE TO hold it and release when it's blinking .. I've learnt something now, thx!

Who is online

Users browsing this forum: No registered users and 14 guests