Community discussions

 
Spaider
just joined
Topic Author
Posts: 2
Joined: Fri Aug 09, 2019 6:55 pm

hAP ac2 - how to choose PoE input

Fri Aug 09, 2019 7:00 pm

Hi,

I'm having a hard tying to understand which PoE injector should I use for it? Does it require Mikrotik-branded injector or I can use any 802.3af injector available? Did not anticipated any poblems and bought TP-Link TL-POE150S and it does not work.
 
andriys
Forum Guru
Forum Guru
Posts: 1177
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: hAP ac2 - how to choose PoE input

Fri Aug 09, 2019 7:16 pm

hAP ac² only supports Passive PoE, so it's not compatible with the type of injector you've bought.
 
Spaider
just joined
Topic Author
Posts: 2
Joined: Fri Aug 09, 2019 6:55 pm

Re: hAP ac2 - how to choose PoE input

Fri Aug 09, 2019 10:02 pm

So, I need 24V passive PoE injector with PSU which provides 18 W or more.
Did I get it right?
 
andriys
Forum Guru
Forum Guru
Posts: 1177
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: hAP ac2 - how to choose PoE input

Fri Aug 09, 2019 10:34 pm

Yep, the required voltage to power hAP ac² via PoE-in is 18-28V, so a passive PoE injector with 24V PSU should work just fine. When in doubt, the product page is your best friend: https://mikrotik.com/product/hap_ac2.

Edit: You can actually get yourself just a proper injector, as you should be able to use the standard PSU that was shipped with your device also in conjunction with PoE injector.

Who is online

Users browsing this forum: No registered users and 10 guests