Community discussions

 
Snite
just joined
Topic Author
Posts: 5
Joined: Sat Aug 17, 2019 9:23 pm

CCR1009 temperature sensor issue

Sat Aug 17, 2019 11:10 pm

Hello!
I have an issue with a temp sensor in my new CCR1009-7G-1C-1S+.
I am collecting values over SNMP every 1 minute, and almost every time received value is correct (28-31C)
But sometimes i can see a spikes over 80C, every few hours.
That spikes occur in random times, not related to CPU load.

Does somebody here have similar issue?
Is it issue of CCR1009? or maybe caused by firmware (6.44.5)?
or just my device has a some hardware defect?
 
mada3k
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Mon Jul 13, 2015 10:53 am
Location: Sweden

Re: CCR1009 temperature sensor issue

Mon Aug 19, 2019 10:32 pm

We also have noticed this behaviour on a couple of CCR1009s.
Manages some CCR's, RB750Gr3, RB922 and wAP's
 
Elans
MikroTik Support
MikroTik Support
Posts: 47
Joined: Wed Apr 18, 2018 12:41 pm

Re: CCR1009 temperature sensor issue

Tue Aug 20, 2019 7:39 am

On which exact CCR1009 model you have noticed such CPU behavior (if possible, provide SN)? We will try to reproduce it locally.
 
madox
newbie
Posts: 25
Joined: Fri Jan 02, 2015 12:52 pm

Re: CCR1009 temperature sensor issue

Tue Aug 20, 2019 4:43 pm

+1 from me also.

First i bought ccr1009PC and everything was fine with temp log. Then i moved to 1009+PC and temp checking script from time to time alarms about high temp but in health status everything was normal (i had a little script to check temp and sends email if it is getting too hot).

After months of sporadically false alarms i stoped the script.
 
Snite
just joined
Topic Author
Posts: 5
Joined: Sat Aug 17, 2019 9:23 pm

Re: CCR1009 temperature sensor issue

Tue Aug 20, 2019 7:51 pm

On which exact CCR1009 model you have noticed such CPU behavior (if possible, provide SN)? We will try to reproduce it locally.
Model: CCR1009-7G-1C-1S+
S/n: 914F0A7AC1B0

some data collected from device:
ccr1009temp.png
ccr1009temp2.png
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 8 guests