Community discussions

MikroTik App
 
Prewest
just joined
Topic Author
Posts: 17
Joined: Tue Oct 20, 2009 3:35 pm

CCR1072 multicast continuity errors when plugging in both psu`s

Mon Dec 23, 2019 5:03 pm

Hi,

We have several CCR1072`s where we also route multicast over via pim, after increasing bandwidth to 15mbit per stream we are getting random continuity / pixelation errors.
Now we traced the problem to one of our CCR`s which runs PIM and routes the multicast traffic, so we replaced the device with another (new) ccr1072 we had laying around.
Same problem..

So we temporally placed a CHR router on site to only do the PIM routing and figure out this issue, no problems when multicast traffic goes through the CHR, except when the traffic goes through the CCR problem still remains..
So, by accident one of my engineers forgot to plug in PSU2 and we noticed we didn`t got the continuity errors any more, after we plug in PSU2 the errors immediately started to come back again.
We checked the power sources and they are both clean.

At the moment we are running the CCR with one PSU plugged in so we don`t get any complains during the holidays.

Is this a design flaw in the CCR1072 or a software bug?
 
mada3k
Long time Member
Long time Member
Posts: 687
Joined: Mon Jul 13, 2015 10:53 am
Location: Sweden

Re: CCR1072 multicast continuity errors when plugging in both psu`s

Mon Dec 23, 2019 9:13 pm

Sound very strange. Grounding issue? Bad power supply?
 
wojrep
newbie
Posts: 42
Joined: Thu Apr 07, 2005 12:27 pm

Re: CCR1072 multicast continuity errors when plugging in both psu`s

Mon Dec 14, 2020 7:49 pm

(...)
Is this a design flaw in the CCR1072 or a software bug?
I have a CCR1036 as a PIM router and noticed that for channels with more bandwidth, there are CC errors and image artifacts, pixel issues. Usually when someone turns on a given channel (IGMP Join).

How did your problem end?
 
DmitryAVET
Member Candidate
Member Candidate
Posts: 112
Joined: Thu Mar 26, 2015 12:27 am
Location: Ukraine, Mukachevo
Contact:

Re: CCR1072 multicast continuity errors when plugging in both psu`s

Fri Dec 18, 2020 11:49 pm

Same problem with CCR1009
viewtopic.php?f=2&t=170728

Who is online

Users browsing this forum: No registered users and 19 guests