Community discussions

MikroTik App
 
Anton8612
just joined
Topic Author
Posts: 2
Joined: Sat Apr 11, 2020 9:12 pm

PWR-LINE PL7400 firmware

Sat Apr 11, 2020 11:16 pm

Please tell me where can I get firmware version 1.4.0 or newer for PL7400?
 
Zacharias
Forum Guru
Forum Guru
Posts: 3459
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: PWR-LINE PL7400 firmware

Sun Apr 12, 2020 2:23 am

I do not see any firmware available... How can you tell that there is an update ?
 
Anton8612
just joined
Topic Author
Posts: 2
Joined: Sat Apr 11, 2020 9:12 pm

Re: PWR-LINE PL7400 firmware

Sun Apr 12, 2020 4:25 am

I do not see any firmware available... How can you tell that there is an update ?
I have several devices based on the QCA7420 chip with different firmware versions of the PWR-LINE module.
The problem arises when the modules work with different firmware versions on the same network, even under ideal conditions.
You do not have the required permissions to view the files attached to this post.
 
Zacharias
Forum Guru
Forum Guru
Posts: 3459
Joined: Tue Dec 12, 2017 12:58 am
Location: Greece

Re: PWR-LINE PL7400 firmware

Sun Apr 12, 2020 7:09 pm

Since it is not available to download, i do not see anything, you could contact Mikrotik support and ask them...
 
zarnaya
just joined
Posts: 1
Joined: Wed Apr 07, 2021 5:26 pm

Re: PWR-LINE PL7400 firmware

Wed Apr 07, 2021 6:24 pm

I updated mine using firmware from this post
plc-hw-platform: QCA7420
plc-sw-platform: MAC
plc-fw-version: 1.5.0(26-20200114-CS)

Simply uploaded firmware to flash and run firmware-update.
 
josepc
just joined
Posts: 7
Joined: Thu Feb 10, 2022 12:31 am

Re: PWR-LINE PL7400 firmware

Thu Feb 10, 2022 12:38 am

I updated mine using firmware from this post
plc-hw-platform: QCA7420
plc-sw-platform: MAC
plc-fw-version: 1.5.0(26-20200114-CS)

Simply uploaded firmware to flash and run firmware-update.
Thanks!

I followed these instructions and everything worked fine.

Download the file with the extension .nvm
Upload it to Files section on Winbox
On terminal write: interface pwr-line upgrade-firmware file=<nameOfFile.vnm> 0
After a few seconds the PLC chipset is upgraded.
 
hecatae
Member Candidate
Member Candidate
Posts: 244
Joined: Thu May 21, 2020 2:34 pm

Re: PWR-LINE PL7400 firmware

Mon Feb 14, 2022 7:09 pm

correct command is:
interface pwr-line upgrade-firmware firmware-file=.nvm
 
eddieb
Member
Member
Posts: 305
Joined: Thu Aug 28, 2014 10:53 am
Location: Netherlands

Re: PWR-LINE PL7400 firmware

Thu Feb 17, 2022 2:56 pm

I also loaded this firware into my pair of pwr-line devices, worked fine, no problems ;-)

Who is online

Users browsing this forum: ivicask and 21 guests