R11e-LTE-US Firmware Upgrade "failed"
Posted: Sun Sep 13, 2020 2:29 am
Running MikroTik RouterOS 6.47.3 on a wAP-LTE-US device.
I am getting DL/UL speeds of 7Mbps/10Mbps, so i know there is a proper and consistent connection.
When attempting to update modem firmware via FOTA I see that there is an update available:
[admin@MikroTik] > / interface lte firmware-upgrade lte
installed: R11eL_v12.09.171931
latest: R11eL_v16.02.183961
However, when attempting (repeatably) to update firmware it first displays "status: connecting". Followed by "status: checking". Then finally "status: downloading".
And after a long wait of displaying "status: downloading", it ultimately shows "failed".
[admin@MikroTik] > interface lte firmware-upgrade lte1 upgrade=yes
status: failed
Is there another way of performing this firmware-upgrade?
Perhaps somehow applying it through the "Files" screen?
Any other suggestions?
Thank You for your help, it is Greatly Appreciated!
Mahalo - Jim Ainge
I am getting DL/UL speeds of 7Mbps/10Mbps, so i know there is a proper and consistent connection.
When attempting to update modem firmware via FOTA I see that there is an update available:
[admin@MikroTik] > / interface lte firmware-upgrade lte
installed: R11eL_v12.09.171931
latest: R11eL_v16.02.183961
However, when attempting (repeatably) to update firmware it first displays "status: connecting". Followed by "status: checking". Then finally "status: downloading".
And after a long wait of displaying "status: downloading", it ultimately shows "failed".
[admin@MikroTik] > interface lte firmware-upgrade lte1 upgrade=yes
status: failed
Is there another way of performing this firmware-upgrade?
Perhaps somehow applying it through the "Files" screen?
Any other suggestions?
Thank You for your help, it is Greatly Appreciated!
Mahalo - Jim Ainge