Hi all,
I might need 4 or more of routers wherein I need to create a 4 port bond on each router to connect to a Cisco stacked core switch. The plan will be to have TLB load balancing on the router and then no special configuration on the Core switch. TLB allow and recommends this approach. In doing so, is there any preferences for what port numbers should I use on the CCR1009 as there might be hardware architecture that may recommend or demand LAG to use last ports and not first 4 ports etc.?
The CCR will be a simple hotspot (in a apartment building) where it is mostly one time mac address caching (not by the CCR but by backend Freeradius). Hotspot splash page will also be redirected back to freeradius. CCR will be set up for http PAP plus mac authentication to be done via freeradius. There will always be few guests of course that will use hotspot splash page every 4 hours for example. Up to 60 apartment could be on one CCR and hence multiple CCRs. Each CCR will also do a NAT to a dedicated Public IP and will also be DHCP server for up to 60 apartments and guests.
Please advise if CCR1009-7G-1C-1S+ is good for such applications. Dual PSU is always good so that each box can be connected to two separate power sources.
Thanks