Community discussions

MUM Europe 2020
just joined
Topic Author
Posts: 1
Joined: Sun Jul 01, 2007 2:44 am

24 volt on rb 133

Thu Jul 12, 2007 1:45 pm

Can power RB133 with 24-26 volt?

specifications claims max voltage 28 volt, but power supliess in market for these boards are 18 volt

can power it with these voltage without risk?


User avatar
MikroTik Support
MikroTik Support
Posts: 6621
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia

Re: 24 volt on rb 133

Thu Jul 12, 2007 4:38 pm

Jose, there should not be any problems, if this data is mentioned at specification.
If you will have any problems, you have to report them.
User avatar
Posts: 29
Joined: Thu Dec 14, 2006 6:35 pm
Location: nowa ruda / poland

Re: 24 volt on rb 133

Fri Jul 13, 2007 12:53 pm

It works fine with 24V buffered power supply.
User avatar
Member Candidate
Member Candidate
Posts: 188
Joined: Fri Feb 03, 2006 6:33 am
Location: New Zealand

Re: 24 volt on rb 133

Sat Jul 14, 2007 8:24 am

Hi there, we feed some of our RB133's between 20v - 27.4v (Depending on battery float at remote locations) and they all run with no problems.

Who is online

Users browsing this forum: No registered users and 25 guests