Community discussions

MikroTik App
 
DerekTM
just joined
Topic Author
Posts: 2
Joined: Mon Dec 21, 2020 9:18 am

RB952Ui-5ac2nD poe-out port issue.

Mon Dec 21, 2020 9:22 am

Hello.
I have a Mikrotik hAP ac lite [RB952Ui-5ac2nD].
I just can't get the 5th port to work normally (the one with poe-out).
When a link is connected to this port, wild packet loss occurs (even with a normal ping, 2 out of 3 packets are lost).
The "RX FCS Error" counter in the port settings is constantly growing (about 17 thousand errors occur in 10 minutes of work), and "Rx Align Error" is also constantly growing.

I tried to turn off Auto Negotiation, turn off poe, force 10, 100 megabits half and full duplex. Of course, I tried to connect different computers, laptops, even an ordinary access point to the port, changed the cables - nothing helps. In other ports (1-4) everything works perfectly.
The firmware is the latest (6.47.8).

Image
Have no idea what happens and how to solve it.
May be a hardware issue?

Thanks.
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11433
Joined: Thu Mar 03, 2016 10:23 pm

Re: RB952Ui-5ac2nD poe-out port issue.

Thu Dec 24, 2020 8:15 pm

What is status of PoE? Try to forcibly disable it (if it's not needed). Other than that, it is likely to be some HW issue.
 
DerekTM
just joined
Topic Author
Posts: 2
Joined: Mon Dec 21, 2020 9:18 am

Re: RB952Ui-5ac2nD poe-out port issue.

Thu Jan 14, 2021 8:01 am

This was a hardware fault. Switch was replaced by seller. Now everything is ok.

Who is online

Users browsing this forum: No registered users and 35 guests