Community discussions

MikroTik App
 
dhwzh
just joined
Topic Author
Posts: 5
Joined: Sun May 06, 2018 7:42 pm

seek help

Wed Dec 23, 2020 11:48 am

Software upgrade makes the equipment work unstable. Now I want to upgrade or downgrade other versions, but I can't finish it. Uploading multiple other versions doesn't work. I don't know the problem there.

Please ask if there is any other way, thank you.

My hardware is rb2011uas
 
erlinden
Forum Guru
Forum Guru
Posts: 1920
Joined: Wed Jun 12, 2013 1:59 pm
Location: Netherlands

Re: seek help

Wed Dec 23, 2020 12:21 pm

If you run into problems, you might want:
  1. export your configuration (/export file=anythingyoulike)
  2. Save file to local computer
  3. Reset RB to defaults
  4. Upgrade
  5. upload config file
  6. import your configuration (/import file=anythingyoulike)
Do you get any errors (check in the log)?
 
dhwzh
just joined
Topic Author
Posts: 5
Joined: Sun May 06, 2018 7:42 pm

Re: seek help

Wed Dec 23, 2020 12:44 pm

It's been tried. It can't solve the problem

It is estimated that it was caused by a problem when upgrading the system
If you run into problems, you might want:
  1. export your configuration (/export file=anythingyoulike)
  2. Save file to local computer
  3. Reset RB to defaults
  4. Upgrade
  5. upload config file
  6. import your configuration (/import file=anythingyoulike)
Do you get any errors (check in the log)?
 
erlinden
Forum Guru
Forum Guru
Posts: 1920
Joined: Wed Jun 12, 2013 1:59 pm
Location: Netherlands

Re: seek help

Wed Dec 23, 2020 1:22 pm

What is the current state of the RB?
Is the device running?

Are you aware of using Netinstall (as last resort)?
https://wiki.mikrotik.com/wiki/Manual:Netinstall
 
dhwzh
just joined
Topic Author
Posts: 5
Joined: Sun May 06, 2018 7:42 pm

Re: seek help

Thu Dec 24, 2020 3:16 am

Can run, often disconnected and restart

Problems after the last system upgrade

What is the current state of the RB?
Is the device running?

Are you aware of using Netinstall (as last resort)?
https://wiki.mikrotik.com/wiki/Manual:Netinstall
 
dhwzh
just joined
Topic Author
Posts: 5
Joined: Sun May 06, 2018 7:42 pm

Re: seek help

Thu Dec 24, 2020 9:55 am

Attempt to install failed to detect a device in etherboot mode
It is found that the ether1 interface is unable to log in to winbox, but it works normally as a WAN port
What is the current state of the RB?
Is the device running?

Are you aware of using Netinstall (as last resort)?
https://wiki.mikrotik.com/wiki/Manual:Netinstall

Who is online

Users browsing this forum: seriquiti and 29 guests