Community discussions

MikroTik App
 
mav
just joined
Topic Author
Posts: 2
Joined: Mon Jan 04, 2021 11:11 am

Cube Lite60 - PtP

Mon Jan 04, 2021 11:17 am

Is it possible to use two Cube Lite60 devices as a point-to-point link? L3 license should be OK but the HW documentation is very brief and it is not clear if there is a such capability.

Thank you
 
mixig
Member Candidate
Member Candidate
Posts: 279
Joined: Thu Oct 27, 2011 2:19 pm

Re: Cube Lite60 - PtP  [SOLVED]

Wed Jan 06, 2021 3:44 pm

Cube Lite60 is designed to be less visible than a traditional dish CPE, but make no mistake – it’s still a real powerhouse. The effective point-to-point distance between Cube Lite60 units is up to 800 meters, point-to-multipoint – up to 500 meters.
 
mav
just joined
Topic Author
Posts: 2
Joined: Mon Jan 04, 2021 11:11 am

Re: Cube Lite60 - PtP

Wed Jan 06, 2021 6:24 pm

You are right. Thank you. It seems pretty clear and I missed it :-/
Moreover, I was hoping that there is someone with personal experience.
 
mistry7
Forum Guru
Forum Guru
Posts: 1456
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: Cube Lite60 - PtP

Wed Jan 06, 2021 11:32 pm

Possible but it is limited by the non gigabit Ethernet Interfaces....
More than 100MBit are not possible

Who is online

Users browsing this forum: No registered users and 36 guests