I have couple of PL7411-2nD worked well for 1 years and now is not working at least not bridging pwrline with ethernet
Power line looks like create the link with PLC
Code: Select all
/interface pwr-line> monitor 0
name: pwr-line1
connection-to-plc: ok
tx-flow-control: no
rx-flow-control: no
plc-actual-network-key: removed
plc-hw-platform: QCA7420
plc-sw-platform: MAC
plc-fw-version: 1.4.0(24-20180515-CS)
plc-line-freq: 50Hz
plc-zero-crossing: detected
plc-role: central-coordinator
plc-station-count: 1
plc-mac: removed
plc-cco-mac: removed
plc-station-info: removed: first-bridged-address:removed
E:0E phy-tx-rate:52Mbps phy-rx-rate:32Mbps
Code: Select all
# INTERFACE BRIDGE HW PVID PR PATH-COST INTERNA... HORIZON
0 H ;;; defconf
ether1 bridge yes 1 0x 10 10 none
1 I H ;;; defconf
pwr-line1 bridge yes 1 0x 10 10 none
2 I ;;; defconf
wlan1 bridge 1 0x 10 10 none