- Can somebody with good mikrotik knowledge help me?
- Is there any procedure how to setup the CRS1xx router using the internal switch chip instead of the CPU?
- The router is 3 layer router
My ISP is working via PPPoE Client
I'm also using the IPTV - which is connected to the router.
Before I bought that router I was hope, that CRS125 will solve my issue with overloading the CPU on old hEX router.
- So we've setup PPPoE in the interface
- 600Mhz CPU is working in range 5 - 30%, when I measure the internet speed it can jump to 80%
- In time when I measure the internet speed, IPTV lagging! Here I'm really wonder WHY? This router use the 3 switches - on each is separated chip
In first 8 ports I've connected ISP cable and IPTV,
no more devices, other LAN ports are used in 2nd and 3dt section, see image
Here is my configuration export:
Code: Select all
/interface bridge
add admin-mac=B8:69:F4:7A:5E:4D auto-mac=no name=bridge-dsi-iptv protocol-mode=none
add name=bridge-local protocol-mode=none
/interface ethernet
set [ find default-name=ether1 ] name=ether01-dsi
set [ find default-name=ether2 ] name=ether02-iptv
set [ find default-name=ether3 ] disabled=yes name=ether03
set [ find default-name=ether4 ] disabled=yes name=ether04
set [ find default-name=ether5 ] disabled=yes name=ether05
set [ find default-name=ether6 ] disabled=yes name=ether06
set [ find default-name=ether7 ] disabled=yes name=ether07
set [ find default-name=ether8 ] disabled=yes name=ether08
set [ find default-name=ether9 ] name=ether09
set [ find default-name=sfp1 ] disabled=yes
/interface pppoe-client
add add-default-route=yes disabled=no interface=ether01-dsi keepalive-timeout=60 name=pppoe-dsi-data password=XXXXXX use-peer-dns=yes user=XXXXXX
/interface vlan
add interface=ether01-dsi name=vlan1-dsi-iptv vlan-id=250
add disabled=yes interface=ether01-dsi name=vlan2 use-service-tag=yes vlan-id=1
/interface list
add name=dsi
add name=local
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=pool-local ranges=10.0.0.200-10.0.0.249
/ip dhcp-server
add address-pool=pool-local disabled=no interface=bridge-local name=dhcp-local
/user group
set full policy=local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web,sniff,sensitive,api,romon,dude,tikapp
/interface bridge port
add bridge=bridge-dsi-iptv interface=ether02-iptv learn=no pvid=250
add bridge=bridge-local interface=ether09
add bridge=bridge-local interface=ether10
add bridge=bridge-local interface=ether11
add bridge=bridge-local interface=ether12
add bridge=bridge-local interface=ether13
add bridge=bridge-local interface=ether14
add bridge=bridge-local interface=ether15
add bridge=bridge-local interface=ether16
add bridge=bridge-local interface=ether17
add bridge=bridge-local interface=ether18
add bridge=bridge-local interface=ether19
add bridge=bridge-local interface=ether20
add bridge=bridge-local interface=ether21
add bridge=bridge-local interface=ether22
add bridge=bridge-local interface=ether23
add bridge=bridge-local interface=ether24
add bridge=bridge-dsi-iptv interface=vlan1-dsi-iptv multicast-router=disabled
add bridge=bridge-dsi-iptv disabled=yes interface=ether01-dsi
/ip neighbor discovery-settings
set discover-interface-list=local
/interface bridge vlan
add bridge=bridge-dsi-iptv disabled=yes tagged=ether01-dsi untagged=ether02-iptv vlan-ids=250
/interface list member
add comment="2 switch" interface=ether09 list=local
add comment="1 switch" interface=ether01-dsi list=dsi
add interface=ether02-iptv list=dsi
add interface=ether10 list=local
add interface=ether11 list=local
add interface=ether12 list=local
add interface=ether13 list=local
add interface=ether14 list=local
add interface=ether15 list=local
add interface=ether16 list=local
add interface=ether17 list=local
add interface=ether18 list=local
add interface=ether19 list=local
add interface=ether20 list=local
add interface=ether21 list=local
add interface=ether22 list=local
add interface=ether23 list=local
add interface=ether24 list=local
/ip address
add address=10.0.0.1/24 interface=bridge-local network=10.0.0.0
/ip dhcp-server network
add address=10.0.0.0/24 gateway=10.0.0.1 netmask=24
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=10.0.0.1 name=router
/ip firewall filter
add action=fasttrack-connection chain=forward connection-state=established,related
add action=accept chain=forward connection-state=established,related
Can someone help me setup my CRS125-24G-1S-2HnD that it will use internal CHIP instead of CPU ?
THX