Community discussions

MUM Europe 2020
 
User avatar
jacoblydon
Member Candidate
Member Candidate
Topic Author
Posts: 100
Joined: Tue Jun 12, 2007 11:51 pm
Location: Arkansas

Any suggestions?

Fri Jul 20, 2007 4:36 pm

I have a client that is about two miles from AP and has some tree cover in between client and AP. I am using a seneo 8602+ and a 10 db omni for broadcast. The client has a rb133 and r52. I am locked on to the broadcast with a -90 signal. We are the only high speed internet provider in her area. Problem is she is only getting about 500k downlaod and 128k up. Should I change the r52 for a seneo 8602+? Surely this would give the client better signal quality right? I forgot to mention tha client is on a Pac Wireless RooTenna about 19 db.
 
cmacneill
Member Candidate
Member Candidate
Posts: 294
Joined: Sun Apr 01, 2007 10:51 pm
Location: Christchurch, New Zealand

Re: Any suggestions?

Fri Jul 20, 2007 11:11 pm

Certainly try the Senao 8602, but my experience is trees are bad news. For the most part I avoid trees as you usually get poor results.
 
wwalcher
Frequent Visitor
Frequent Visitor
Posts: 72
Joined: Tue Jun 01, 2004 9:08 am
Contact:

Re: Any suggestions?

Mon Jul 23, 2007 12:10 am

Trying switching to a 24db grid and to a Ubiquity XR2. Raise the antenna up as high as possible. Hopefully, that will get you a 10+ db gain and a salvaged client.
 
User avatar
jacoblydon
Member Candidate
Member Candidate
Topic Author
Posts: 100
Joined: Tue Jun 12, 2007 11:51 pm
Location: Arkansas

Re: Any suggestions?

Mon Jul 23, 2007 12:40 am

Thank's

Who is online

Users browsing this forum: WirelessDSL and 25 guests