Community discussions

MikroTik App
 
cmartin
newbie
Topic Author
Posts: 45
Joined: Wed Nov 07, 2007 7:04 pm
Location: Plzeň, Czech Republic

PowerLine interface hardware offloading

Mon Feb 15, 2021 12:06 pm

Out of curiosity, I would like to ask someone for explanation: how can be USB-attached PL7400 communication hardware-offloaded in bridge? Can be indication "H" in bridge info correct at all?
/system routerboard pri
       routerboard: yes
        board-name: hAP lite
             model: RB941-2nD
          revision: r3
     serial-number: XXXXXXXXXXX
     firmware-type: qca9531L
  factory-firmware: 6.45.9
  current-firmware: 6.48.1
  upgrade-firmware: 6.48.1
/int bridge port print 
Flags: X - disabled, I - inactive, D - dynamic, H - hw-offload 
 #     INTERFACE                          BRIDGE                          HW  PVID PRIORITY  PATH-COST INTERNAL-PATH-COST    HORIZON
 0 I H ether4                             bridge1                         yes    1     0x80         10                 10       none
 1 I   wlan1                              bridge1                                1     0x80         10                 10       none
 2   H ether1                             bridge1                         yes    1     0x80         10                 10       none
 3   H ether2                             bridge1                         yes    1     0x80         10                 10       none
 4 I H ether3                             bridge1                         yes    1     0x80         10                 10       none
 5   H pwr-line1                          bridge1                         yes    1     0x80         10                 10       none

Who is online

Users browsing this forum: No registered users and 25 guests