Here's my setup:
I have an ISP generic ONT receiving the fiber and configured with the provided SLID during the installation. This device (ISP ONT) is connected on my fresh Mikrotik Router (hEX S), where it divides the VLAN domain of transmission, authenticates with PPPoE and bridges the connection to all my regular devices through LAN.
Simple.
Now, I need to to bridge the connection from Mikrotik hEX S to another router, a Mikrotik CAS125-24G-15-IN that is around 60 meters of distance from my hEX S setup.
Initially I planned to simply pull a CAT 6 line from my hEX S to my CAS125. But I realized I have a Huawei GPON-OLT-CLASS B+, that I previously bought to use on my hEX S to replace my ISP ONT (which didn't work due to the ISP not whitelisting my unit) and a fiber cable laying around here.
So, Here's my dilemma: If I get another Huawei GPON-OLT-CLASS B+ unit, connect it on my CAS125 SFP port and pull the fiber from my hEX S to the CAS125 (both using the same Huawei GPON units on the respective router's SFP ports), would I be able to bridge/receive the internet connection from my hEX S to my CAS125? Is there the need of specific GBIC units for that? And what are the complications from this type of installation?
Hope you wizards can give me some wisdom here. I'm fairly new to all this network enterprise grade technology.