Community discussions

MikroTik App
 
HAL9OOO
just joined
Topic Author
Posts: 4
Joined: Wed Apr 14, 2021 10:55 pm

Audience Mesh

Wed Apr 14, 2021 11:08 pm

I have 2 Audience routers set up in home mesh. The initial setup using wps button works good. The issue comes when attempting to move the repeater to a new location, removing power from the repeater effectively factory resets it and when power is reapplied the mesh is gone. I feel the mesh setup should be persistent and any help would be greatly appreciated.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26287
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Audience Mesh

Thu Apr 15, 2021 9:15 am

That definitely should not happen and is not happening in my setup. Maybe the device simply can't reach the main Audience unit? Are you moving it too far?
 
HAL9OOO
just joined
Topic Author
Posts: 4
Joined: Wed Apr 14, 2021 10:55 pm

Re: Audience Mesh

Thu Apr 15, 2021 6:36 pm

No, they are right next to each other. I have tried with 2 separate sets of Audience devices, all updated to the latest 6.48.2 firmware. Anytime either device loses power the mesh is gone once power is restored. One of the devices; set up as the repeater; required a factory reset after power was restored. It was no longer in mesh but did not broadcast its own wifi network, nor would it allow connection via Eth2. I could not get an ip.

Who is online

Users browsing this forum: Google [Bot] and 17 guests