Hi,
I'm powering CSS610 via PoE from hAP ac3's ether5 port.
Over night, in the CSS610 I only had a laptop plugged in (lid closed). In the morning I found the switch turned off and, unfortunately, I didn't think to check the PoE status in routeros. Re-plugged the ethernet cable to the switch's port 1 and it powered on again, no issue.
Is there any sort of "power saving" feature (in both devices) or any other explanation as to why this happened?
Code: Select all
/interface ethernet poe> print detail
0 name="ether5" poe-out=auto-on poe-priority=10 power-cycle-ping-enabled=no
power-cycle-interval=none