I am using the following configuration:
https://www.init7.net/de/support/routerinfos/mikrotik- ccr2004_fiber7-x2-2-2.auto.rsc
I havs made several tests, using two computers on the lan, and against my internet provider.
Locally I get max 7 Gbps, and against the init7 iperf3 server (25G connection!), about 5.5 Gbps.
Its all very disappointing.
Is there anything that I can change in the configuration in order to improve the performance?
I had the impression that 15G was possible?
Is there no other option than to splash out on a CCR2216?
can I use the configuration from the ccr2004 in the CCR2216?
Does anybody know if the CCR2216 will be able to have a throughput of 25G from a single interface with this configuration?
How warm does the CCR2216 get?
I was unable to use the S+RJ10 modules, as it got too warm 70 degrees when connected at 10G, and 60 when connected at 1G and 2.5G)
With a heatsink on the sfp28 modules, and one sfp+ 10G module as well as 3x 1G modules, the fans of the ccr2004 mostly stay silent. Would that be the same for the CCR2216?
Best regards
Erlend