I am looking to access the serial console on the RB260GS. I recognize that I can SSH into the device, but for my application accessing the serial port is preferred.
I opened up the case and I can see 2 sets of UART lines (RXD,TXD,GND). I hooked up a 3.3v UART to USB adapter to both and the following is spit out of each port at power on, however, neither is interactive and I can't get a login prompt. I tried Enter, CTRL-C, CTRL-], sending terminal BREAK, and just generally banging on the keyboard :-P
================================
SwOS v2.11
mac address: 08:55:31:xx:xx:xx
ip address: 192.168.88.1
board: CSS106-5G-1S
serial nr: xxxxxxxxxxxxxx
================================
Is an interactive console available on the RB260GS?
Thanks,
Dave